I see. I upgraded LMS (and Spotty) as I was forced to reinstall
everything because Synology updated Perl to an incompatible version.
So it would be enough to fall back to an earlier Spotty version without
connection issues.
The spotty helper binaries haven't been updated since November 2019.
I
SamY wrote:
> While it may appear to be running fine with v4.0, that is only because
> the Quick Select is not being retried. It is still timing out after 5
> seconds. Btw, I have no idea what the QZ appearing on your AVR display
> means and could find nothing by googling it. Is there a possibil
Yes, it only happens with Mellow and ONLY with the FLAC regular stream.
FLAC interactive and the AAC streams are fine.
That's really interesting, as I thought the lossy streams were using the
same metadata provider the FLAC regular.
Currently the 'now playing' info changed to 'Tom McRae, For
DavidBulluss wrote:
> All appears to be running fine in V4.0, as before.
>
> 34508
>
> Regards, David
While it may appear to be running fine with v4.0, that is only because
the Quick Select is not being retried. It is still timing out after 5
seconds. Btw, I have no idea what the QZ appearing
SamY wrote:
> I would like you to go back to v4.0 and run the same power on sequence
> with debug on so I can see if the timeouts are happening there too but
> being compensated for in some way.
All appears to be running fine in V4.0, as before.
34508
Regards, David
+--
T-bird wrote:
> Shall we try to collect different versions somewhere?
> I have a copy of LogitechMediaServer-x86_64-8.1.1-1610364019.spk
Would you be kind enough to PM me a download link? Thanks in advance!
RichardP's Pr
ygi wrote:
> just in case i have LogitechMediaServer-x86_64-8.1.1-1610364019.spk
>
> tell me if someone would like me to share it.
>
> yves
Yes please, yves - that would be much appreciated!
Richard
RichardP's Profile:
SamY wrote:
> It appears that you are running into the same problem as MarSOnEarth,
> where the plugin is going into a Quick Select timeout retry loop after
> powering on successfully. I am working on a code change to prevent the
> retry loop but, as with Mars, I have no explanation for why the
DavidBulluss wrote:
> Synching volume now turned off. Zone 2 tested 34507.
> Whwn turning on all is correct except QZ appears every few seconds on
> screen of AVR. Also, initially adjusting volume on LMS does not control
> the amp until I take the LMS volume very high then the amp vol jumps to
>
SamY wrote:
> Synching the volume at track changes was only supported for the main
> zone prior to this release, regardless of whether the menu item was
> selected or not. In attempting to add support for it, I overlooked an
> issue that may have been the reason it was not supported before. Unti
OK, I installed Docker and then the LMS container and have it running
fine on my Synology DS916+ just fine.
It plays music on my RPi via Tunein Radio App.
However I cannot seem to get it to point to my Music Library located on
the Same NAS.
I went through the Tutorial located in this Thread, b
Jaca wrote:
> Hey Philippe, yeah it seems to work now ie always start form
> beginning/ignores " start from" .. prompt . At least when using
> material. Will test it bit more but is looking good, thanks [emoji106]
Good - I've tried with Classic UI, Material and iPeng. I think they all
worked (i
Hi,
I am using a pi4 (4gb) with spotty for a few years now. I always have
big playlists (2000+) with all the bands I like. For reasons I want to
try out the same setup with tidal as streaming service.
For the the setup I needed to update LMS to "Version: 8.1.1 - 1610364019
@ Thu Jan 14 06:24:07
philippe_44 wrote:
> I've thought again about the issue and I think I've found a solution.
> Please try 0.140.0Hey Philippe, yeah it seems to work now ie always start form
beginning/ignores " start from" .. prompt . At least when using
material. Will test it bit more but is looking good, thanks
philippe_44 wrote:
> Very unlikely to have a connection with the latest update - are you sure
> you have not changed anything else? What LMS version are you using?
Your reply guided me, I had bad transcoding. I had fixed decoding rate
@44100 which made opus 48khz as in youtube sound bad.
Thank
Yuyito wrote:
> Sorry, I have
>
> Logitech Media Server Version: 8.2.0 - 1610082250
>
> Lately I have only fiddled with the custom-convert.conf to get opus and
> mpc files transcoded...
And that is very likely the explanation why you have speed issues. Opus
if one of the 2 formats used by YT
philippe_44 wrote:
> Very unlikely to have a connection with the latest update - are you sure
> you have not changed anything else? What LMS version are you using?
Sorry, I have
Logitech Media Server Version: 8.2.0 - 1610082250
Lately I have only fiddled with the custom-convert.conf to get o
Yuyito wrote:
> Hi everybody,
>
> After the latest Youtube plugin update, youtube audio is going too fast
> and sounds high pitched.
>
> I have this setup
> Operating system: freebsd - EN - UTF8
> Platform Architecture: amd64-freebsd
> Perl Version: 5.32.0 - amd64-freebsd-thread-multi
> Audio:
o_spring wrote:
> It works !!! Thank you very much
> Note : the new field was not empty in the default profile : « HASH
».
> something was in it. I have cleared it and edited my device profile
That one has been bothering me for a long while but I just found it
LMS 8.2 on Odroid-C4 - *Sq
afriend wrote:
> Created the OS PR.
Thanks, merged.
afriend wrote:
> I see you've changed to extraction length to 30s. Will it distort the
> result of my ongoing analysis by much or at all if I stop the process
> now, change the value from 60s to 30s and then continue? Would love to
> save so
Hi everybody,
After the latest Youtube plugin update, youtube audio is going too fast
and sounds high pitched.
I have this setup
Operating system: freebsd - EN - UTF8
Platform Architecture: amd64-freebsd
Perl Version: 5.32.0 - amd64-freebsd-thread-multi
Audio::Scan: 1.02
IO::Socket::SSL: 2.068
Created the OS PR.
I see you've changed to extraction length to 30s. Will it distort the
result of my ongoing analysis by much or at all if I stop the process
now, change the value from 60s to 30s and then continue? Would love to
save some time.
And I was actually thinking mostly of NUM_PREV_TR
DavidBulluss wrote:
> If I untick it then LMS does not control the volume of the amp anymore,
> and of course the vol remains constant track to track.
>
> David
I assume you mean the Plugin checkbox on the player which of course
removes the plugin operations completely for that player.
If you
afriend wrote:
> BTW does it fill the metadata at the end because a first look at the
> musly.db (in progress) shows the relative path (files) and the values
> (vals) but the other metadata columns are still empty.
Yeah, meta-data is saved at the end.
afriend wrote:
> Good to know. So if I do
gegen wrote:
> Hi hoping you can help :)
> This is a second setup for me, for my son, my setup works perfectly on
> same hardware :)
> Have got the skill working for him on a pi4 with piCorePlayer 7.0.1 and
> works very well.
> However if I reboot the pi the ngrok tunnel is lost, running the s
mherger wrote:
> What do you consider a crash? The log says the plugin was restarting the
>
> daemon as it was still running, but seemingly no longer connected to
> Spotify's servers.Then I was mistaken. I assumed the restarts to happen
> because of earlier
crashes.
mherger wrote:
> Crashi
funio wrote:
> I've a weird problem with on of my touch players. It login to my server
> remotely, the server sees the player but the player doesn't recognized
> it has been logged in. Server is 8.2 and touch firmware is 7 something.
> Now I've downloaded the latest community firmware for touch
cpd73 wrote:
> My code does not touch the LMS db, it creates its own SQLite database.
> Therefore, I wanted a quick way to update this database to reflect and
> metadata changes in my files. When doing this the script just reads the
> tags and updates the DB for any changes.
I keep my music file
mrw wrote:
> A simple firmware upgrade basically leaves alone what in the etc
> hierarchy, where I suspect wlanpoke is installed (I may be wrong).
> A factory reset would wipe it out, as well as Wi-fi password, etc.
Thanks, you are correct about the location.
-
DavidBulluss wrote:
> I have installed the new 4.1 beta and have noticed that when using Zone
> 2 with the setting "enable synching the volume" ticked (as I have had it
> set previously) LMS adjusts the amp volume correctly but the volume
> reverts back to the start up volume approx 3 seconds in
philippe_44 wrote:
> Turns out that LMS can resize for you - I've uploaded a new version
It works !!! Thank you very much
Note : the new field was not empty in the default profile : « HASH
».
something was in it. I have cleared it and edited my device profile
Log file with the Radio Paradise plugin in 'debug' mode is attached.
Although I 'edited' it to make it even more clear when I switched
streams, I didn't take anything out, this is all that's in the log.
It looks like the Mellow mix, regular stream only looks at a (local)
cache, while the inter
Apesbrain wrote:
>
> EDIT: Interestingly, it appears that "wlanpoke" remains installed after
> a firmware upgrade. I didn't expect that, but good I think.
A simple firmware upgrade basically leaves alone what in the etc
hierarchy, where I suspect wlanpoke is installed (I may be wrong).
A fac
NigelDavvenport wrote:
> Hi Carsten, I have installed the plugin on the LMS and activated it back
> in March but the LMS on the Netgear NAS doesn't seem to like the "plug
> in", I am on 8.2. everything works great but if I go to software updates
> on any device it wants me to update back to 7.8
Hi hoping you can help :)
This is a second setup for me, for my son, my setup works perfectly on
same hardware :)
Have got the skill working for him on a pi4 with piCorePlayer 7.0.1 and
works very well.
However if I reboot the pi the ngrok tunnel is lost, running the startup
script manually the
CarstenB wrote:
> The update process is much easier with the new "Community firmware for
> Touch/Radio/Controller" - plugin from Michael Herger, current version is
> v0.0.2. Install that plugin in your LMS and activate it. Then start the
> standard update process on your squeezebox and it will u
First a huge thank you @ BoomX2 for keeping on the work improving this
really cool plugin!
Had this idea since my old mum, she will actually be 80 today! ..:-)
,has a Touch which only is connect to MySqB since she's only listening
to radio stations and don't have a computer. So I was fiddling a
cpd73 wrote:
> Not sure, never used Roland0's script. I used (well copied and modified)
> Roland0's musly.py which interfaces Python->libmusy.so Musly does not
> process the whole track, but only a portion. One of the changes I made
> was how much to analyse - Roland0's is 30seconds, mine 2 minu
Aesculus wrote:
> I have updated the 4.1 beta source files in GitHub with the zone fix
I have installed the new 4.1 beta and have noticed that when using Zone
2 with the setting "enable synching the volume" ticked (as I have had it
set previously) LMS adjusts the amp volume correctly but the vo
NigelDavvenport wrote:
> Sorry to be a pain but when I follow the
> https://sourceforge.net/projects/lmsclients/files/squeezeos/ hyperlink
> to download the update for squeezebox radios to put on an SD but I can't
> see the 8.0.1_r16844 (or newer) updates for jive or baby there. I last
> downlo
40 matches
Mail list logo