Cut-Throat wrote:
> OK Thanks! --- I have done this now. Will give it a whirl over the
> next couple weeks.
>
> It is indeed silent, as I turned the volume of the TV up and it was
> 'silent' Was not silent before, so a nice update indeed!
Well, it has gotten better, but I still can
SamY wrote:
> You should try installing the new v1.80.1 plugin update and selecting
> the Transcode option of 'silent' for the CC slaves, which eliminates the
> unnecessary cpu and/or network overhead incurred by processing the hires
> audio signal. It works great! See my previous posts...
OK
Cut-Throat wrote:
> OK, I have set up these parameters and it has been working much
> better. Not flawlessly however. I was listening this afternoon and
> it came to this track on the playlist (Again Hi-Res) and it could not
> display this track on the TV and it eventually caused the
philippe_44 wrote:
> My recommendation is to use the "transcode" mode to mp3 at the lowest
> bitrate as it might be the CC itself which has a problem with the hi-res
> file. By transcoding it, the CC will simply saw the same format all the
> time and because you don't care about the audio, it
philippe_44 wrote:
> I did a version with a "silent" mode which sends mp3 @ 64kbps, let me
> know what you think, I've not tested it much
That works amazingly well! No network or cpu overhead incurred and no
stuttering, even on 24/176.4 flac files. Excellent job, Philippe. Thank
you!
Sam
SamY wrote:
> Lol!!! Touché, Philippe. :p
>
> And, as always, thank you for this plugin and all the other great work
> you do for the SB community.
>
> EDIT: I ordered a DAC32 yesterday for my office so I am at least trying
> to upgrade, however slowly. When I was younger, I was always at the
philippe_44 wrote:
> ...you know a used Pi 3 will cost you very little
Lol!!! Touché, Philippe.
And, as always, thank you for this plugin and all the other great work
you do for the SB community.
Sam
SamY's Profile:
Just wanted to express my heartfelt thanks to you Philippe for making
the plugin that got me to resurrect my LMS to use with my ShieldTV.
Server is TrueNAS and running in a BSD Jail, so I can confirm this works
in that case. The things I had to work past were comparatively simple.
0.
Just wanted to express my heartfelt thanks to you Phillipe for making
the plugin that got me to resurrect my LMS to use with my ShieldTV.
Server is TrueNAS and running in a BSD Jail, so I can confirm this works
in that case. The things I had to work past were comparatively simple.
0.
SamY wrote:
> Thanks for this idea! I have configured the players in my A/V room and
> bedroom to sync with their local Castbridge players and it works like a
> charm without any transcoding in the plugin, albeit at the expense of
> doubling the network traffic. However, because I am running
Cut-Throat wrote:
> OK, Thanks Much! -- I had forgot about a few of these parameters. And
> setting them the way you recommended has corrected the tracks I was
> having problems with. I am going to play with this again over the
> next few days... Thanks Again!!
Thanks for this idea! I
philippe_44 wrote:
> My recommendation is to use the "transcode" mode to mp3 at the lowest
> bitrate as it might be the CC itself which has a problem with the hi-res
> file. By transcoding it, the CC will simply saw the same format all the
> time and because you don't care about the audio, it
Cut-Throat wrote:
> I posted quite a bit about this problem last year, and so I thought I'd
> take another try at it. The Chromecast Bridge is a very useful pluggin
> for myself and Audiophile Buddies What we are trying to do is just
> display the Album Art on our TVs while the Chrome-cast
I posted quite a bit about this problem last year, and so I thought I'd
take another try at it. The Chromecast Bridge is a very useful pluggin
for myself and Audiophile Buddies What we are trying to do is just
display the Album Art on our TVs while the Chrome-cast is synced to
another
Hopefully this is in the right place as I haven't been able to
completely be sure where the issue lies.
I'm having a problem in the last couple of days playing tracks over 10
minutes from Spotify via Chromecast Audio and Airplay
The Following instances
1) track Shine on you crazy Diamond
philippe_44 wrote:
> Should be fixed in 1.64.1
Sounds good. Thanks, Philippe.
Sam
SamY's Profile: http://forums.slimdevices.com/member.php?userid=63495
View this thread:
SamY wrote:
> Beginning with the current release (v1.64.0), client 'mute' commands are
> being ignored by all my CastBridge players. I thought maybe it was due
> to a recent LMS upgrade from v8.1.2 to v8.2, but non-Chromecast players
> are unaffected.
>
> Edit: I just realized that the failed
Beginning with the current release (v1.64.0), client 'mute' commands are
being ignored by all my CastBridge players. I thought maybe it was due
to a recent LMS upgrade from v8.1.2 to v8.2, but non-Chromecast players
are unaffected.
Sam
Dakos wrote:
> Is host mode actually essential? I usually just identify the ports
> needed and keep things contained that way. So far I have -p
> 49152-49252:49152-49252 but that alone isn't doing the trick. What other
> ports does this need?
You need host mode. No NAT can be used as the
Is host mode actually essential? I usually just identify the ports
needed and keep things contained that way. So far I have -p
49152-49252:49152-49252 but that alone isn't doing the trick. What other
ports does this need?
Paul Webster wrote:
> FYI - from first post in this thread
Yeah learning to read is on my to-do list. I can see there's a whole
thing about networking there now!
Dakos's Profile:
FYI - from first post in this thread
>
> Other tips
>
> With docker you must use 'host' mode network
>
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, supla
finland, abc
The plugin can't seem to create a castbridge.xml file. I'm running in a
Docker. There's nothing very helpful in the log. Any thoughts?
Does it need to know anything about networking? The "Network binding and
port" box seems to be disabled.
Code:
Starting
Curious which is the better option between Phillippe's Airconnect or
CastBridge/Shairport combo to get music to google speakers via airplay.
Is there a difference or are they essentially the same thing? wondering
if there's a reason to keep Airconnect around or just let LMS take over.
Good morning all
I have a small problem my lms is installed on my syno thanks to docker
I tried to install the 2 plugins from philippe (by the way, bravo for
the plugin) chromecast bridge and unpn but it does not work I tried in
static or not but no change the xml file is not created I attach a
The Groundsman wrote:
> V 1.60.0
>
> Installed fine for me on Windows 10.@philippe_44 must have fixed it [emoji3].
> It works for me now as well.
Sent from my Pixel 3a using Tapatalk
slartibartfast's Profile:
V 1.60.0
Installed fine for me on Windows 10.
The Groundsman's Profile: http://forums.slimdevices.com/member.php?userid=70305
View this thread: http://forums.slimdevices.com/showthread.php?t=104614
castalla wrote:
> Same issue for me. Latest update fails to install.The server log shows this
21-05-30 07:53:16.0266] Slim::Utils::PluginDownloader::_installDownload
(216) digest does not match
/var/lib/squeezeboxserver/cache/DownloadedPlugins/CastBridge.zip -
CastBridge will not be
slartibartfast wrote:
> I see there is an update available for Chromecast bridge but I can't
> install it. I am sure I have seen this same issue before but can't
> remember the reason or solution.
>
> Sent from my Pixel 3a using Tapatalk
Same issue for me. Latest update fails to install.
I see there is an update available for Chromecast bridge but I can't
install it. I am sure I have seen this same issue before but can't
remember the reason or solution.
Sent from my Pixel 3a using Tapatalk
JussiM wrote:
> I would like to get it running in silent mode without the status window.
> What is the easiest way to achieve this?
Very easy. Starting the program at startup with Task Scheduler and
ticking the "Hidden" check-box.
I got squeeze2cast working in Windows10. It now runs as a standalone
application started from Windows startup folder. For configuration, I
used a temporary LMS installation and moved the plugin folder before
uninstalling the temporary installation. Works fine. The actual LMS
server runs in a
Bogg wrote:
> Hi,
> I'm trying this for the first time, but can't get a config file
> generated.
> What have I done wrong?
>
> I installed like a normal plugin through LMS which is on windows 10.
> I've tried letting the config auto generate, and I've tried clicking the
> generate button,
Hi,
I'm trying this for the first time, but can't get a config file
generated.
What have I done wrong?
Code:
Logitech Media Server Version: 8.1.2 - 1619728303 @ Fri Apr 30 00:26:40
WEDT 2021
Server IP Address: 10.5.0.2
Server HTTP Port Number: 9000
Operating
expectingtofly wrote:
> Apologies for the havac that caused :(:( . Unfortunately, I accepted
> a pull request and I didn't fully understand the implications. Lesson
> learned.
Never happened to me ;)
LMS 8.2 on Odroid-C4 - *SqueezeAMP!*, 5xRadio, 5xBoom, 2xDuet, 1xTouch,
1xSB3. Sonos
philippe_44 wrote:
> The new BBCSound update imports XML::Simple this way (which is never
> imported like that in LMS)
> >
Code:
> >
> use XML::Simple qw(:strict);
>
> >
> And that wreaked havoc
Apologies for the havac that caused :(:( .
slartibartfast wrote:
> Is that on a Pi? My Windows machine is OK.
It's running in a docker-container on my QNAP. Betriebssystem: Debian
(Docker) - DE - utf8 x86_64-linux
Now after deinstalling the BBC-Sounds plugin everything is fine again,
also my favorites are back ... :)
1x docker on
philippe_44 wrote:
> The new BBCSound update imports XML::Simple this way (which is never
> imported like that in LMS)
> >
Code:
> >
> use XML::Simple qw(:strict);
>
> >
> And that wreaked havocAs Douglas Adams would have said " The
>
slartibartfast wrote:
> There is a similar report about the airplay bridge
> https://forums.slimdevices.com/showthread.php?p=1020489
>
> Sent from my Pixel 3a using Tapatalk
The new BBCSound update imports XML::Simple this way (which is never
imported like that in LMS)
Code:
philippe_44 wrote:
> I did not see that - so there is "something" that has replaced a Perl's
> packageThere is a similar report about the airplay bridge
https://forums.slimdevices.com/showthread.php?p=1020489
Sent from my Pixel 3a using Tapatalk
slartibartfast wrote:
> Quite a few of us seem to have this issue. Is it likely we would all
> have corrupted config files on the same day?
>
> Sent from my Pixel 3a using Tapatalk
I did not see that - so there is "something" that has replaced a Perl's
package
LMS 8.2 on Odroid-C4 -
Paul Webster wrote:
> Just had essentially the same error in UPnP Bridge
> >
Code:
> >
> [21-04-26 11:23:07.7444] Slim::Networking::IO::Select::__ANON__ (130)
Error: Select task failed calling Slim::Plugin::UPnP::Events::request: No value
specified for 'KeyAttr'
philippe_44 wrote:
> Try to erase the config file, it might be corruptedQuite a few of us seem to
> have this issue. Is it likely we would all
have corrupted config files on the same day?
Sent from my Pixel 3a using Tapatalk
slartibartfast wrote:
> Updating Reliable just removed Reliable I think. There were some changes
> made to both LMS 8.1 and 8.2 as far as I know. If it was trivial to
> install an older version of LMS on a Pi running Raspbian I would try it.
>
> Sent from my Pixel 3a using Tapatalk
And I've
MichaelPr wrote:
> same here
>
> >
Code:
> > [21-04-26 17:03:38.6547] Slim::Utils::PluginManager::load (323) Error:
Couldn't load Plugins::CastBridge::Plugin
> [21-04-26 17:47:38.8170] main::init (390) Starting Logitech Media Server
(v8.2.0, 1619381438, Sun Apr 25
MichaelPr wrote:
> same here
>
> >
Code:
> > [21-04-26 17:03:38.6547] Slim::Utils::PluginManager::load (323) Error:
Couldn't load Plugins::CastBridge::Plugin
> [21-04-26 17:47:38.8170] main::init (390) Starting Logitech Media Server
(v8.2.0, 1619381438, Sun Apr 25
same here
Code:
[21-04-26 17:03:38.6547] Slim::Utils::PluginManager::load (323) Error:
Couldn't load Plugins::CastBridge::Plugin
[21-04-26 17:47:38.8170] main::init (390) Starting Logitech Media Server
(v8.2.0, 1619381438, Sun Apr 25 23:22:11 CEST 2021) perl
Paul Webster wrote:
> Just had essentially the same error in UPnP Bridge
> >
Code:
> >
> [21-04-26 11:23:07.7444] Slim::Networking::IO::Select::__ANON__ (130)
Error: Select task failed calling Slim::Plugin::UPnP::Events::request: No value
specified for 'KeyAttr'
Just had essentially the same error in UPnP Bridge
Code:
[21-04-26 11:23:07.7444] Slim::Networking::IO::Select::__ANON__ (130) Error:
Select task failed calling Slim::Plugin::UPnP::Events::request: No value
specified for 'KeyAttr' option in call to XMLout() at
tfec wrote:
> The same happend to me.
> >
Code:
> >
> Starting Logitech Media Server on port 9000...
> [21-04-26 17:12:15.3680] main::init (388) Starting Logitech Media
The same happend to me.
Code:
Starting Logitech Media Server on port 9000...
[21-04-26 17:12:15.3680] main::init (388) Starting Logitech Media Server
(v8.1.1,
slartibartfast wrote:
> I just tried uninstalling and reinstalling the plugin and it still won't
> load.
>
> Edit. Rebooting the Pi doesn't help either.
>
> Sent from my Pixel 3a using Tapatalk
The server log shows this
Code:
[21-04-26 14:16:10.0695]
slartibartfast wrote:
> I noticed this morning that my Chromecast players had disappeared from
> the players list and the reason is that Castbridge plugin failed to
> load. Any idea why this would happen? It could be coincidence but it
> must have been after updating to the latest LMS 8.2.
>
>
I noticed this morning that my Chromecast players had disappeared from
the players list and the reason is that Castbridge plugin failed to
load. Any idea why this would happen? It could be coincidence but it
must have been after updating to the latest LMS 8.2.
Sent from my Pixel 3a using
Jesper wrote:
> Running LMS 8.1.1 on Windows 10 Updated to 20H2 19042.928
>
> My 3 Chormecast devices have been working perfectly in LMS, but have
> stopped sometime during the last few months. I could still see them in
> the settings page for Chromecast Bridge in LMS. Got an error message
>
philippe_44 wrote:
> Hi - Thanks. No, there is no CLI option to restart it. Have you tried to
> prevent the bridge from removing unresponsive devices?
>
>
> Envoyé de mon iPad en utilisant Tapatalk
I'll give that a try. Thanks for your prompt response.
Running LMS 8.1.1 on Windows 10 Updated to 20H2 19042.928
My 3 Chormecast devices have been working perfectly in LMS, but have
stopped sometime during the last few months. I could still see them in
the settings page for Chromecast Bridge in LMS. Got an error message
when trying to create a
JSC wrote:
> Hi phillippe,
>
> Firstly many thanks for your awesome plugins. A quick question.
> Sometimes certain google devices will not play music (or there is no
> audio) even though the LMS recognises the player and thinks it is
> playing. This is normally resolved just by restarting the
>
Hi phillippe,
Firstly many thanks for your awesome plugins. A quick question.
Sometimes certain google devices will not play music (or there is no
audio) even though the LMS recognises the player and thinks it is
playing. This is normally resolved just by restarting the
squeeze2cast-win.exe
mherger wrote:
>
> Whether you like it or not, there are hundreds of thousands of users who
>
> like the old behaviour, or got used and rely on it. I can't remember the
>
> last time this topic has come up. Changing that behaviour could
> potentially lead to hundreds of thousands of WTF!?!
Wow! That was quick. I just installed the new 8.1.2 nightly build and
tested your fix. It works perfectly. Thanks. Now if I can only convince
Michael to accept my one-line change to unmute instead of setting the
volume to 0 before applying incremental volume changes, my small,
pitiful life's
philippe_44 wrote:
>
> It's a bug in LMS where negative volume ended-up being reverted. As you
> can see below, there is no protection in the look-up table to negative
> volume. I've submitted a PR
Wow! That was quick. I just installed the new 8.1.2 nightly build and
tested your fix. It
philippe_44 wrote:
> Trying to still have a life...
>
> It's a bug in LMS where negative volume ended-up being reverted. As you
> can see below, there is no protection in the look-up table to negative
> volume. I've submitted a PR
I apologize for my impatience, Philippe. ;-) Thanks for the
SamY wrote:
> Is this thread still active? Philippe?
Trying to still have a life...
It's a bug in LMS where negative volume ended-up being reverted. As ou
can see below, there is no protection in the look-up table to negative
volume
Code:
sub volume {
my
Is this thread still active? Philippe?
Sam
SamY's Profile: http://forums.slimdevices.com/member.php?userid=63495
View this thread: http://forums.slimdevices.com/showthread.php?t=104614
There seems to be a problem with squeeze2cast handling the LMS muting
function. A "mixer muting" CLI command results in the volume being
incrementally decreased from its current value down to 0 using
CastSetDeviceVolume, which is fine. However, it then immediately follows
that with another
philippe_44 wrote:
> uploaded
Fantastic! Thank you. All sorted. Working again.
Thanks for sorting. :D
humax99's Profile: http://forums.slimdevices.com/member.php?userid=69035
View this thread:
humax99 wrote:
> Ah, OK!
uploaded
LMS 8.1.x on Odroid-C4 - *SqueezeAMP!*, 5xRadio, 5xBoom, 2xDuet,
1xTouch, 1xSB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000,
ShairPortW, 2xChromecast Audio, Chromecast v1 and v2, Squeezelite on Pi,
Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5,
philippe_44 wrote:
> argh ... try the static version then
> https://www.dropbox.com/s/3q98238yv6htu8k/squeeze2cast-x86-64-static?dl=0
>
> [edit]: although it's very strange that ssl is not present on your
> system
I noticed in 'FLAC crash2.txt' above that in line 112 a similar error
occured:
humax99 wrote:
> Sorry, that one was with Transcode set as none. This one is with it set
> to FLAC.
>
> 33738
Was able to reproduce it ... it's a bad build issue :(
LMS 8.1.x on Odroid-C4 - *SqueezeAMP!*, 5xRadio, 5xBoom, 2xDuet,
1xTouch, 1xSB3. Sonos PLAY:3, PLAY:5, Marantz NR1603,
humax99 wrote:
> Thank you for this. I have installed gdb and also some debuginfo
> libraries it required.
>
> I placed the /squeeze2cast-x86-64 in /var/lib/squeezeboxserver/prefs
> (same as the config file) and made it executable (0777). Then cd to that
> directory ran 'gdb --args
philippe_44 wrote:
> So if your server has gdb install, you could use the attached file,
> unzip it and make it executable, then run
> >
Code:
> >
> gdb --args ./squeezecast-x86-64 -x
>
> >
> Type "run" and when it crashes, get the
humax99 wrote:
> Sorry, that one was with Transcode set as none. This one is with it set
> to FLAC.
>
> 33738
So if your server has gdb install, you could use the attached file,
unzip it and make it executable, then run
Code:
gdb --args ./squeezecast-x86-64 -x
philippe_44 wrote:
> Unfortunately did not give me enough information. Would you be
> confortable launching manually squeeze2cast and using gdb (simple
> command).
>
> [edit]: Can you also share with me your config file?
humax99 wrote:
> Yes, should be OK. I am familiar with using WinSCP
philippe_44 wrote:
> Unfortunately did not give me enough information. Would you be
> confortable launching manually squeeze2cast and using gdb (simple
> command).
>
> [edit]: Can you also share with me your config file?
Yes, should be OK. I am familiar with using WinSCP and Putty to my
humax99 wrote:
> Here is the full log. I played a local mp3 file, set transcoding to
> FLAC. Tried pressing play twice. No playback.
>
> 33736
>
> Thanks for your help.
Unfortunately did not give me enough information. Would you be
confortable launching manually squeeze2cast and using gdb
philippe_44 wrote:
> Can you add in the "additional options" line "-d all=sdebug" and send me
> a log. It will help know better where it crashes.
Here is the full log. I played a local mp3 file, set transcoding to
FLAC. Tried pressing play twice. No playback.
33736
Thanks for your help.
humax99 wrote:
> Everything I try causes it to crash; local FLAC files, Radio Paradise
> FLAC stream, BBC Sounds live feed.
Can you add in the "additional options" line "-d all=sdebug" and send me
a log. It will help know better where it crashes.
LMS 8.1.x on Odroid-C4 - *SqueezeAMP!*,
philippe_44 wrote:
> Are you playing local files? I can't reproduce the crash here
humax99 wrote:
> Everything I try causes it to crash; local FLAC files, Radio Paradise
> FLAC stream, BBC Sounds live feed.
Just tried local mp3 files and they are the same.
If I select any format for
philippe_44 wrote:
> Are you playing local files? I can't reproduce the crash here
Everything I try causes it to crash; local FLAC files, Radio Paradise
FLAC stream, BBC Sounds live feed.
humax99's Profile:
humax99 wrote:
> Just noted that v1.49.6 was committed 25 days ago so that definitely
> must have worked OK.
Are you playing local files? I can't reproduce the crash here
LMS 8.1.x on Odroid-C4 - *SqueezeAMP!*, 5xRadio, 5xBoom, 2xDuet,
1xTouch, 1xSB3. Sonos PLAY:3, PLAY:5, Marantz NR1603,
philippe_44 wrote:
> Do you know what was your previous version?
humax99 wrote:
> I am pretty sure v1.49.6 was working OK. I did upgrade to v1.49.9 but I
> can not be 100% sure I used LMS with a Chromecast with that version.
Just noted that v1.49.6 was committed 25 days ago so that
philippe_44 wrote:
> Do you know what was your previous version?
I am pretty sure v1.49.6 was working OK. I did upgrade to v1.49.9 but I
can not be 100% sure I used LMS with a Chromecast with that version.
humax99's
humax99 wrote:
> Since updating to Chromecast bridge to v1.49.11, I am unable to run the
> FLAC transcode option. The default settings (no transcode) work but as
> soon as transcode to FLAC is selected, the plugin keeps crashing and
> going into a loop. There is no playback.
>
> I have
I have attached a more complete log showing 4 restarts after the FLAC
transcode option was saved. Two attempts were made to try and play the
track.
Logitech Media Server Version: 8.1.2 - 1612378848
Fedora release 23
Operating system: Red Hat - EN - utf8
Platform Architecture: x86_64-linux
Perl
Since updating to Chromecast bridge to v1.49.11, I am unable to run the
FLAC transcode option. The default settings (no transcode) work but as
soon as transcode to FLAC is selected, the plugin keeps crashing and
going into a loop.
I have uninstalled the plugin, reinstalled, erased and
SteveBamber wrote:
> Some additional info that may or may not help - I'm running the latest
> nightly build
>
> Version: 8.1.2 - 1613972332 @ Mon Feb 22 08:37:44 CET 2021
>
> and I'm now getting different behaviour from my three Chromecast
> devices.
>
> The Chromecast Audio behaves as per
SteveBamber wrote:
> Thanks for looking Philippe - here's a shorter log & updated config file
Some additional info that may or may not help - I'm running the latest
nightly build
Version: 8.1.2 - 1613972332 @ Mon Feb 22 08:37:44 CET 2021
and I'm now getting different behaviour from my three
philippe_44 wrote:
> I don't know then. Can you set additional debugging to "none". That's
> too much log for now
Thanks for looking Philippe - here's a shorter log & updated config file
+---+
|Filename: castbridge.xml.txt
SteveBamber wrote:
> Hi Philippe - no not in flow mode, everything defaulted here's the
> config file...
>
I don't know then. Can you set additional debugging to "none". That's
too much log for now
LMS 8.1.x on Odroid-C4 - *SqueezeAMP!*, 5xRadio, 5xBoom, 2xDuet,
1xTouch, 1xSB3. Sonos
philippe_44 wrote:
> Are you in flow mode?
Hi Philippe - no not in flow mode, everything defaulted here's the
config file...
$ cat castbridge.xml
1048576
4194304
-1
1
0
thru
aac,ogg,ops,ogf,flc,alc,wav,aif,pcm,mp3
96000
1
0
0
1
1
50
0
1
1
0
?
?
debug
debug
debug
debug
debug
debug
debug
SteveBamber wrote:
> Hi Phillipe - I've noticed that my Chromecast Audio has stopped
> advancing to the next track, not sure exactly when this started but I've
> attached a log.
>
> It just plays the first track in the queue repeatedly until you stop it
> - doesn't crash, and doesn't seem to
Hi Phillipe - I've noticed that my Chromecast Audio has stopped
advancing to the next track, not sure exactly when this started but I've
attached a log.
It just plays the first track in the queue repeatedly until you stop it
- doesn't crash, and doesn't seem to affect other Chromecast devices (
philippe_44 wrote:
> Send me the log please
>
>
> Envoyé de mon iPad en utilisant Tapatalk
Thanks - with you now.
pete105's Profile: http://forums.slimdevices.com/member.php?userid=70294
View this thread:
pete105 wrote:
> I spoke too soon. I experienced another bridge crash mid-track today (at
> 14:29) and I gathered a log file. Is it worth me sending this to you
> Philippe, or would you like me to proceed with setting up the Pi and
> running the bridge from there?
Send me the log please
Xocyah wrote:
> I have the same problem, even after having the firewall prompt to make
> an exception (which I agreed to) but it's made no change for me. Which
> log file did you delete - castbridge-log.log?
For the record (hopefully this may help others) this was nothing to do
with the
I spoke too soon. I experienced another bridge crash mid-track today (at
14:29) and I gathered a log file. Is it worth me sending this to you
Philippe, or would you like me to proceed with setting up the Pi and
running the bridge from there?
philippe_44 wrote:
> Try to get a reproducible "track not advancing event", these are the
> easiest for me to fix as I have a lot of log options when it happens
Okay thanks Philippe, I will do.
pete105's Profile:
pete105 wrote:
> I've just read through this thread Cut-Throat, thanks for sharing. In my
> case, when playing to one of the 3 CCAs I have, or the Home group that
> contains these devices, I'm not trying to play or sync to any other none
> CCA device at the same time. I've turned off
Cut-Throat wrote:
> I certainly am having issues and never could get the Chromecast Bridge
> to work reliably. I had the same problems as you about 'getting stuck'
> on tracks and not advancing. I was never able to reproduce it, as it
> seemed totally random. You can read about my Problems
301 - 400 of 2237 matches
Mail list logo
