Re: [PEDA] Looking for a resistor supplier.

My responses are below, preceeded by *** JaMi Smith Optical Crossing Inc. -Original Message- From: Abd ul-Rahman Lomax [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 23, 2002 9:57 AM To: Protel EDA Forum Cc: JaMi Smith Subject: Re: [PEDA] Looking for a resistor supplier. At 06

Re: [PEDA] Looking for a resistor supplier.

This topic is getting a bit heated - time to drop it I think. Although it is always tempting to get the last word in on a topic this one seems to be getting personal and we don't really need that do we. Maybe it could go to the OT list, or better still to private email. My opinions only of

Re: [PEDA] Looking for a resistor supplier.

http://www.garrettelec.com/ supplies small quantities of surface mount parts. You can check stock online. Jeff Adolphs -Original Message- From: Juha Pajunen [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 22, 2002 7:37 AM To: Protel EDA Forum Subject: [PEDA] Looking for a resistor

Re: [PEDA] Looking for a resistor supplier.

- 4401 Still Creek Drive, Burnaby, B.C., Canada, V5C 6G9. Tel (604) 292-9089 (direct line) Fax (604) 292-9010 Website: www.norsat.com -Original Message- From: Juha Pajunen [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 22, 2002 4:37 AM To: Protel EDA Forum Subject: [PEDA] Looking

Re: [PEDA] Looking for a resistor supplier.

At 09:06 AM 1/22/2002 -0800, Brad Velander wrote: Juha, Have you considered doing your resistance as a short section of PCB trace? For example a 0.020 wide trace, 1 oz CU, of 0.161 inches in length will give you a resistance of 0.00399 ohms according to some calculators. This length would

Re: [PEDA] Looking for a resistor supplier.

[mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 22, 2002 4:37 AM To: Protel EDA Forum Subject: [PEDA] Looking for a resistor supplier. Hi, Looking for 0.004R (2512 footprint, 1-2W) sense resistor for switching power supply, can you help me? I have one (IRC LRF 2512-01-R004-J http

Re: [PEDA] Looking for a resistor supplier.

At 10:18 AM 1/22/02 -0800, you wrote: but there is a strong tempco with this technique +0.39%/K This may or may not be a bad thing, the magnetics have tempcos too. I'd avoid it just because some day in the future someone will buy 2oz boards rather than 1 oz. Best regards, Spehro Pefhany

Re: [PEDA] Looking for a resistor supplier. for a SENSE RESISTOR

: [PEDA] Looking for a resistor supplier. Hi, Looking for 0.004R (2512 footprint, 1-2W) sense resistor for switching power supply, can you help me? I have one (IRC LRF 2512-01-R004-J http://www.welwyn-tt.com/lrc_fr.htm ) but distributor says that you have to get 1800 (I need 100-200), you know where

Re: [PEDA] Looking for a resistor supplier.

prob. need a slider type ohmite, they break real easy though and their mounting clips suck newark should have them, they only charge about 25% more than list price great recommendation, eh?, but seriously at that exact value i think it will be tough dale does those ones with a gold color heat

Re: [PEDA] Looking for a resistor supplier.

- Original Message - From: Brian Guralnick [EMAIL PROTECTED] To: Protel EDA Forum [EMAIL PROTECTED] Sent: Tuesday, January 15, 2002 6:52 PM Subject: [PEDA] Looking for a resistor supplier. I need a 4.5 Ohm, 50 Watt resistor. For precision audio, any recommendations? Brian Guralnick

Re: [PEDA] Looking for a resistor supplier.

Take a look at: http://www.mouser.com/products/detail.cfm?MPart=71-RH50-4.7CustRef=source=search http://www.mouser.com/products/detail.cfm?MPart=588-D50K-5.0CustRef=source=search http://www.digikey.com/scripts/us/dksus.dll?Filter John Williams Brian Guralnick wrote: I need a 4.5 Ohm,

Re: [PEDA] Looking for a resistor supplier.

:52 PM To: Protel EDA Forum Subject: [PEDA] Looking for a resistor supplier. I need a 4.5 Ohm, 50 Watt resistor. For precision audio, any recommendations? Brian Guralnick * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED