On 08:23 AM 8/01/2002 +0100, [EMAIL PROTECTED] said: >Hi, >my problem is. I have route many parallel tracks. After that, > I must place in the middle of this parallel tracks a via. So I need >place for this via. I must push all tracks manually. > >Is there a tool or a macro , to make Push Obstacle for VIA's ? > > >Harald Brünig
No - there is no such tool. Protel does have some facilities that may help your manual re-routing. 1) Turn on the Push-n-Shove manual routing mode (Tools|Preferences then on the Options tab change the Interactive Routing mode) 2) Turn on Loop Removal (same location as point 1). Using the Push mode you can move one of you most deeply embedded tracks out a little and the other parallel tracks will move out a to maintain the required clearance. I find that when shoving many tracks it helps to do a number of short segments to keep the speed up and to stop some confusion to the shove function when you get many tracks and long shove lengths. Ian Wilson * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
