Re: [PEDA] LCD screens WAS: Hardware questions (upgrade time - yuk!)
> the only reason for which I'd ever change a screen resolution would be to > _increase_ it. I don't need menus and toolbars to take half of my screen Some of us folks like bigger fonts so they are more readable. My 21 in. CRT is capable of 1600x1200 (at least), but I run it at 1152x768 because text gets too small for my liking. I can see fine when wearing my contacts (which I do every day), but my CRT is about 2-3 ft. from my face (because that's where I want it). So if I use higher res, the text gets too small. I can put in a long day (12+ hrs.) with no eyestrain with this setup. Why is my CRT so far from my face? Because the space inbetween is taken up by papers, tools, prototypes under test, etc. Typical design engineer desk mess. Best regards, Ivan Baggett Bagotronix Inc. website: www.bagotronix.com - Original Message - From: "mariusrf" <[EMAIL PROTECTED]> To: "Protel EDA Forum" <[EMAIL PROTECTED]> Sent: Monday, July 15, 2002 5:26 PM Subject: Re: [PEDA] LCD screens WAS: Hardware questions (upgrade time - yuk!) > the only reason for which I'd ever change a screen resolution would be to > _increase_ it. I don't need menus and toolbars to take half of my screen > area at low resolutions. I always run the highest res the screen supports. > > Talking of laptops, is anybody running Protel on 1600x1200 resolution > Toshiba laptops ? I've seen a few models with this screen and liked it. The > only problem for me was XP, because I run several other programs which > require dongles, are not XP compatible etc. Also some missing ports > (replaced by usb only) are a problem for me . > > Matt Tudor , MSEE > http://www.gigahertzelectronics.com > > > - Original Message - > From: "Bagotronix Tech Support" <[EMAIL PROTECTED]> > To: "Protel EDA Forum" <[EMAIL PROTECTED]> > Sent: Monday, July 15, 2002 4:32 PM > Subject: Re: [PEDA] LCD screens WAS: Hardware questions (upgrade time - > yuk!) > > > > You guys are compleat vidiots! ;-) > > > > What happens when you run a LCD screen at something other than it's pixel > > resolution? I have seen quite a few laptop screens that don't look good > > when running at lower resolutions than pixel-res. > > > > Best regards, > > Ivan Baggett > > Bagotronix Inc. > > website: www.bagotronix.com > * * * * * * * * * * * * * * * * * * * * * * * * * > > > > * Tracking #: DBA9952F7F325A46A5A7A91A610A334A72D337E6 > * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] LCD screens WAS: Hardware questions (upgrade time - yuk!)
the only reason for which I'd ever change a screen resolution would be to _increase_ it. I don't need menus and toolbars to take half of my screen area at low resolutions. I always run the highest res the screen supports. Talking of laptops, is anybody running Protel on 1600x1200 resolution Toshiba laptops ? I've seen a few models with this screen and liked it. The only problem for me was XP, because I run several other programs which require dongles, are not XP compatible etc. Also some missing ports (replaced by usb only) are a problem for me . Matt Tudor , MSEE http://www.gigahertzelectronics.com - Original Message - From: "Bagotronix Tech Support" <[EMAIL PROTECTED]> To: "Protel EDA Forum" <[EMAIL PROTECTED]> Sent: Monday, July 15, 2002 4:32 PM Subject: Re: [PEDA] LCD screens WAS: Hardware questions (upgrade time - yuk!) > You guys are compleat vidiots! ;-) > > What happens when you run a LCD screen at something other than it's pixel > resolution? I have seen quite a few laptop screens that don't look good > when running at lower resolutions than pixel-res. > > Best regards, > Ivan Baggett > Bagotronix Inc. > website: www.bagotronix.com * * * * * * * * * * * * * * * * * * * * * * * * * * Tracking #: DBA9952F7F325A46A5A7A91A610A334A72D337E6 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] LCD screens WAS: Hardware questions (upgrade time - yuk!)
You guys are compleat vidiots! ;-) What happens when you run a LCD screen at something other than it's pixel resolution? I have seen quite a few laptop screens that don't look good when running at lower resolutions than pixel-res. Best regards, Ivan Baggett Bagotronix Inc. website: www.bagotronix.com - Original Message - From: "Brian Guralnick" <[EMAIL PROTECTED]> To: "Protel EDA Forum" <[EMAIL PROTECTED]> Sent: Monday, July 15, 2002 4:17 PM Subject: Re: [PEDA] Hardware questions (upgrade time - yuk!) * Tracking #: 5ECEBC34AACD4D4D9786474DB41657628AC3A152 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *