Re: [PEDA] SCHEM GROUPING, DOES IT WORK?
I am working on a simmilar design at the moment, and it seems that if you place the components in the order that the parts were created in things seem to work happliy enough. To start with whenever I reannotated the design all the part numbers would seeming swap of their own accord, but this seemed to help. I also gave up on the 'group parts together if matched by' stuff. Good luck Wayne Bickers > -Original Message- > From: Colin Weber [SMTP:[EMAIL PROTECTED]] > Sent: Wednesday, 12 December 2001 2:46 p.m. > To: Protel EDA Forum > Subject: Re: [PEDA] SCHEM GROUPING, DOES IT WORK? > > I had a go recently, but couldn't get it to work reliably or predictably. > I gave up. > > > At 05:39 PM 11/12/2001 -0800, you wrote: > >I have a large 8 page schem with many multi part components > > > >annotate splattered the multi part groupings all over the place much as > >might be expected > > > >noticing the 'group parts together if match by' in the annotate dialog > >i went and put GRP1 in part field 8 for one section and GRP2 in the next > >and so forth > > > >when i ran the annotation using 'group parts together' by BOTH Part Type > >and Field 8, it made a bigger and potentially worse mess > > > >it did not honor the part type at all! > >so res network 4.7K was RN2 and so was res network 100K RN2 ! > > > >this is pretty bad IMHO > > > >has anyone actually made this work? > > > >if 2 parts have different part types and the same group by field content > >shouldn't that work? > > > >i suppose i could put different strings in field 8 for different parts, > >but i suppose i could manually annotate the thing too! > > > >Dennis Saputelli > > > Regards, > > Colin Weber * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] SCHEM GROUPING, DOES IT WORK?
I had a go recently, but couldn't get it to work reliably or predictably. I gave up. At 05:39 PM 11/12/2001 -0800, you wrote: >I have a large 8 page schem with many multi part components > >annotate splattered the multi part groupings all over the place much as >might be expected > >noticing the 'group parts together if match by' in the annotate dialog >i went and put GRP1 in part field 8 for one section and GRP2 in the next >and so forth > >when i ran the annotation using 'group parts together' by BOTH Part Type >and Field 8, it made a bigger and potentially worse mess > >it did not honor the part type at all! >so res network 4.7K was RN2 and so was res network 100K RN2 ! > >this is pretty bad IMHO > >has anyone actually made this work? > >if 2 parts have different part types and the same group by field content >shouldn't that work? > >i suppose i could put different strings in field 8 for different parts, >but i suppose i could manually annotate the thing too! > >Dennis Saputelli Regards, Colin Weber * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] SCHEM GROUPING, DOES IT WORK?
I have a large 8 page schem with many multi part components annotate splattered the multi part groupings all over the place much as might be expected noticing the 'group parts together if match by' in the annotate dialog i went and put GRP1 in part field 8 for one section and GRP2 in the next and so forth when i ran the annotation using 'group parts together' by BOTH Part Type and Field 8, it made a bigger and potentially worse mess it did not honor the part type at all! so res network 4.7K was RN2 and so was res network 100K RN2 ! this is pretty bad IMHO has anyone actually made this work? if 2 parts have different part types and the same group by field content shouldn't that work? i suppose i could put different strings in field 8 for different parts, but i suppose i could manually annotate the thing too! Dennis Saputelli -- ___ www.integratedcontrolsinc.comIntegrated Controls, Inc. tel: 415-647-04802851 21st Street fax: 415-647-3003San Francisco, CA 94110 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *