I thought all quadro cards supported stereo? (must admit that I'm not sure :-)
The 3 pin stereo connector is not needed to get stereo with the Asus monitors -
they get the stereo sync via DVI. But the stereo mode 10 and/or 11 must be
supported by the card and driver.
My main problem was to forc
BS"D
It's not clear to me if the K600 card specified by Dick in his post will
actually support stereo under Linux. It has no 3 pin stereo connector for the
emitter, and I was under the impression that one could only get Stereo Mode 10
or 11 under linux using the Quadro cards with the stereo op
ben Peter Friis) [mailto:e...@novozymes.com]
Sent: Friday, July 19, 2013 2:50 AM
To: Richard Harper;
pymol-users@lists.sourceforge.net<mailto:pymol-users@lists.sourceforge.net>
Subject: Re: [PyMOL] NVIDIA 3D error
Hi Dick
A hint about your setup would be helpful :-) I Assume you use
y 19, 2013 2:50 AM
To: Richard Harper; pymol-users@lists.sourceforge.net
Subject: Re: [PyMOL] NVIDIA 3D error
Hi Dick
A hint about your setup would be helpful :-) I Assume you use Linux.
Our ASUS VG278H monitors works fine in 3D stereo with Nvidia Quadro FX5800
cards. I have pasted my notes
Hi Dick
A hint about your setup would be helpful :-) I Assume you use Linux.
Our ASUS VG278H monitors works fine in 3D stereo with Nvidia Quadro FX5800
cards. I have pasted my notes about how I configured X.
Cheers,
Esben
Asus VG278H flat panel 3D screens and Ubuntu 12.04
These screen
