[Ql-Users] R: Test email
Even my own email when delivered to the list went in the spam folder... -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di George Gwilt Inviato: mercoledì 31 maggio 2017 16:56 A: ql-us...@q-v-d.com Oggetto: Re: [Ql-Users] Test email > On 12 May 2017, at 20:42, Dilwyn Joneswrote: > > Oh, OK, I'll send 1,500 test emails to Tobias now as it's going direct to him by mistake. > (UK NHS hacking at work again) > > Dilwyn This was treated as junk. (Ive only just looked now!) George ___ QL-Users Mailing List ___ QL-Users Mailing List
[Ql-Users] R: QL Homepage is back
Hello Dilwyn, Only as a matter of curiosity I found 100% of your emails addressed to the list since 7th of May in my spam folder Regards Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di Dilwyn Jones Inviato: martedì 9 maggio 2017 13:18 A: ql-us...@q-v-d.com Oggetto: [Ql-Users] QL Homepage is back Thanks to the swift action of XorA on QL Forum, my QL Homepage site is back, after a fashion. ___ QL-Users Mailing List
[Ql-Users] R: Test email
His web site is still down, what happened? Is there any backup available somewhere (if not I think it is time to think about it being one of the more (most likely the most) comprehensive site with Sinclair QL information and software)? Regards Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di Graeme Gregory Inviato: domenica 7 maggio 2017 20:00 A: ql-users@lists.q-v-d.com Oggetto: Re: [Ql-Users] Test email On Sun, 7 May 2017, at 05:58 PM, Dilwyn Jones wrote: > Just testing to see that the change of email address worked. Yahoo, Dilwyn is back! :-D ___ QL-Users Mailing List ___ QL-Users Mailing List
[Ql-Users] R: Toolkit II v2.31
Hi Marcel, Also from the other Italian side - the ones living in Italy, sorry Fabrizio :-) - we would have supported the idea to keep the network code on the ROM version leaving extra code not needing the ROM timing on RAM. Still there uare sers using QL with standard interfaces who night be interested in such version. On a slightly different subject in our discussion it came out there would be some need of betatesters especially for the old and less used hardware configurations (especially wrt emulators) to avoid loosing some compatibility like it happened for the DD drive support on SMSQ/E for Gold Card, SGC an Aurora. Cheers Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di Fabrizio Diversi Inviato: venerdì 31 marzo 2017 22:36 A: ql-users@lists.q-v-d.com Oggetto: Re: [Ql-Users] Toolkit II v2.31 Marcel, please don't do it, your name is always a clear sign of quality software ! Making the Server (Fserve) external to the rom is a suitable solution, if possible. Fabrizio On 31/03/2017 17:13, Marcel Kilgus wrote: > Peter Graf wrote: >>> It's fairly easy to built new versions, so nobody is stopping >>> anybody to make different releases. I do this for my own amusement, mostly. >> If mostly for your amusement, one more reason to give your stuff a >> different name. Not the traditional TK2 ROM, where major QL features >> are expected to work. > You have convinced me, I will stop working on it. Thanks for saving me > a lot of time. > > Cheers, Marcel > > ___ > QL-Users Mailing List > ___ QL-Users Mailing List ___ QL-Users Mailing List
[Ql-Users] R: SMSQE 3.30
Dear Wolfgang, It looks like, from tests done by Andrea Carpi on his QXL, the BAUD command is not linked anymore in the QXL version of SMSQ/E. Could you give a quick check? Thank you Kind regards Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di Wolf Inviato: sabato 18 febbraio 2017 08:36 A: ql-us...@q-v-d.com Oggetto: [Ql-Users] SMSQE 3.30 Hi all SMSQE 3.30 is out. Bugfixes only (QPC loading slices, SMSQmulator links in flp driver again). Have fun Wolfgang ___ QL-Users Mailing List ___ QL-Users Mailing List
[Ql-Users] R: QPC2 and a few more surprises
Thank you Marcel (and the other guys who kindly released the sw), Much appreciated also from the Italian QL community Ciao Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di Marcel Kilgus Inviato: mercoledì 25 gennaio 2017 00:05 A: ql-us...@q-v-d.com Oggetto: [Ql-Users] QPC2 and a few more surprises I'm too tired to write much more, but I just released a bunch of stuff on my web site. You can read about it here: https://www.kilgus.net/2017/01/25/new-qpc2-disa-and-more/ Have fun, Marcel ___ QL-Users Mailing List ___ QL-Users Mailing List
[Ql-Users] R: R: Level 2 Device Drivers
Hi Klaus (and Marcel), I've already provided the files to Rich but it is better you also provide yours to double check they are the correct ones Regards Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di Klaus Frank Inviato: venerdì 2 dicembre 2016 10.07 A: ql-us...@q-v-d.com Oggetto: Re: [Ql-Users] R: Level 2 Device Drivers Hello QL'ers I have a listing of the v2 GALs for Qubide, if anyone want it. Klaus ( maybe the last QL'er in DK) Sendt fra min iPad > Den 2. dec. 2016 kl. 09.52 skrev Marcel Kilgus: > > d.santachi...@libero.it wrote: >> While reading your email I reminded many years ago Romaldo Parodi in >> Italy provided me with v2 GALs as replacement for a Qubide to be >> upgrade from ROM >> v1 to ROM v2. > > Jochen Hassler once wrote a software that could reverse engineer the > JEDEC files for GAL chips. But it's been 15 years or so since I've > last used it, not even sure the discs are still readable. Still, it's > possible as a last resort. > > Marcel > > ___ > QL-Users Mailing List ___ QL-Users Mailing List ___ QL-Users Mailing List
[Ql-Users] R: Level 2 Device Drivers
Hi Rich, While reading your email I reminded many years ago Romaldo Parodi in Italy provided me with v2 GALs as replacement for a Qubide to be upgrade from ROM v1 to ROM v2. Most likely Romaldo found the files, although he cannot guarantee 100% they are the correct ones. If still interested I can send them by separate email Kind regards Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di RWAP Software Inviato: lunedì 28 novembre 2016 23:26 A: ql-us...@q-v-d.com Oggetto: Re: [Ql-Users] Level 2 Device Drivers On 2016-11-28 21:12, RWAP Software wrote: > Does anyone have any contact details for Jurgen Falkenberg, or Jochen > Hassler ? > > Tetroid (on SellMyRetro) is working on a new QL interface which merges > the Trump Card and QubIDE interfaces and ideally it would be good to > include the Level 2 device drivers and ATR device for the Trump Card > element. > > Alternatively, is there another way of adding Level 2 device drivers? > > More details of the interface and pictures appear on the QL Forum > thread - http://www.qlforum.co.uk/viewtopic.php?f=2=1670 > Whilst on this subject - does anyone have any contact details for Phil Borman - there are a few things it would be nice to include in the QubIDE driver. There is also the problem, that whilst the source code for the QubIDE v2 ROM was released, the v2 GAL code required to use that ROM code does not appear to be available anywhere! Rich ___ QL-Users Mailing List ___ QL-Users Mailing List
[Ql-Users] R: R: RWAP Software 30th Anniversary - Week 4 Competition
Ooops sorry, the message was of course not meant to be on the mailing list but a private message I apologize -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di d.santachi...@libero.it Inviato: venerdì 25 novembre 2016 09.58 A: ql-us...@q-v-d.com Oggetto: [Ql-Users] R: RWAP Software 30th Anniversary - Week 4 Competition Dear Rich, could you please change my email address for your mailing list from er...@libero.it to d.santachi...@libero.it? Thank you Best regards Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di Rich Mellor Inviato: giovedì 24 novembre 2016 11.29 A: ql-us...@q-v-d.com Oggetto: [Ql-Users] RWAP Software 30th Anniversary - Week 4 Competition For the final competition to celebrate RWAP Software's 30th Anniversary - we have decided to aim this competition solely at QL Users (after all, it was the QL which inspired the launch of our business back in 1986). It is a big prize fund worth over £200. For your chance to win a complete copy of the QL Adventures Box-Sets (1 to 3), the QL Games Box-Sets (1 to 6), plus QWord for QPC2, simply comment on our thread on the QL Forum with which is your favourite game for the QL and why. Get an extra entry for including a valid link to the game on the QL Wiki (if the link does not exist, you might need to create the page !), and another entry for a valid link to where you can get the program. Winners will be chosen at random from all entries received on 1st December 2016. Entries have to name the actual name of the QL Game - but they can be commercial, freeware or public domain games. The QL Forum thread appears at: http://qlforum.co.uk/viewtopic.php?f=12=1714#p14957 -- Rich Mellor RWAP Services Specialist Enuuk Auction Programming Services www.rwapservices.co.uk ___ QL-Users Mailing List ___ QL-Users Mailing List ___ QL-Users Mailing List
[Ql-Users] R: RWAP Software 30th Anniversary - Week 4 Competition
Dear Rich, could you please change my email address for your mailing list from er...@libero.it to d.santachi...@libero.it? Thank you Best regards Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di Rich Mellor Inviato: giovedì 24 novembre 2016 11.29 A: ql-us...@q-v-d.com Oggetto: [Ql-Users] RWAP Software 30th Anniversary - Week 4 Competition For the final competition to celebrate RWAP Software's 30th Anniversary - we have decided to aim this competition solely at QL Users (after all, it was the QL which inspired the launch of our business back in 1986). It is a big prize fund worth over £200. For your chance to win a complete copy of the QL Adventures Box-Sets (1 to 3), the QL Games Box-Sets (1 to 6), plus QWord for QPC2, simply comment on our thread on the QL Forum with which is your favourite game for the QL and why. Get an extra entry for including a valid link to the game on the QL Wiki (if the link does not exist, you might need to create the page !), and another entry for a valid link to where you can get the program. Winners will be chosen at random from all entries received on 1st December 2016. Entries have to name the actual name of the QL Game - but they can be commercial, freeware or public domain games. The QL Forum thread appears at: http://qlforum.co.uk/viewtopic.php?f=12=1714#p14957 -- Rich Mellor RWAP Services Specialist Enuuk Auction Programming Services www.rwapservices.co.uk ___ QL-Users Mailing List ___ QL-Users Mailing List
[Ql-Users] QL Italian meeting - just a glimpse
Hi All, The 13° Italian Sinclair QL meeting is over. I needed 24hours to breathe a little bit as everything was fantastic but I needed a small break from these intense days. I have to thank all the people who attended the meeting either physically in Modena (we were 9 - most of them coming from >200 Km far) or via WebEx videoconference. Thanks to all the people who would have liked to attend either physically or via WebEx and that couldn't make it with regret: families, work and life bring often higher priorities. Special thanks also to people who did not manage to attend but who contributed with ideas and during the meeting preparation (posters, leaflets and so on). Just to give a quick outlook, in the morning Italian session in addition to the people attending in Modena, we had two Italian users connected via web-ex actively participating (i.e total 11),. Instead for the afternoon English session three users from outside Italy connected via web-ex actively participating at the discussions, in addition 6 persons from Italy or abroad connected via WebEx in listening mode only. Which means 18 people overall in the afernoon. We had really nice talks on many topics. Mille Grazie to Jan Bredenbeek, Marcel Kilgus, and Urs Koenig who have been really kind for their appreciated contributions to the discussions. We talked about their story, past projects, QL meetings around Europe, Fidonet BBS, ZX81, Giro d'Italia, MIST, but we also talked about ongoing and future projects like Urs and Giorgio QL distribution packages. I really feel in debt with Jan, Marcel and Urs for having found time to attend and having provided such a valuable contribution. This was the 13th Italian QL meeting, first one being in Gardone Riviera (1989, even if not quite 99% sure) actually some more gatherings took place maybe with slightly different naming (QItaly club, Beginner's club, Garage meeting at my parents' house...probably others). Personally speaking I have attended them all, at least the official ones. And since 1993 I organized with the help of many other friends all the Italian meetings. The nice thing is that every time I feel the same exact sensations both during and after the meeting which is nice as I am not anymore a young boy since quite some time (I am 46). That's all for the time being, more detailed reports will follow in the next weeks, we also took pictures and video so sooner or later most of the information will be shared with everybody. Kind regards Davide (this message is cross-posted to ql-users mailing list and QL Forum) ___ QL-Users Mailing List
[Ql-Users] R: QL Italian meeting WebEx session
Hi Derek, Thank you, we will prepare reports and we will share videos, the latter of course will take a little bit more time. In the meanwhile I will provide a brief report soon. Regards Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di Derek Stewart Inviato: lunedì 21 novembre 2016 11.18 A: ql-us...@q-v-d.com Oggetto: Re: [Ql-Users] QL Italian meeting WebEx session Hi Davide, My apologies for not attending via Webex, did you do any video or photographs of the meeting. I would be interested to see them. Regards, Derek On 20/11/16 12:34, d.santachi...@libero.it wrote: > Hi All, > > We will restart with the English WebEx session of the 13th Sinclair QL > Italian meeting at 15:00 > > https://meetings.webex.com/collabs/#/meetings/detail?uuid=M2M8EU73OF6B > Z0T8BV > 7BEWEY0R-1PI1=661457.41064 > Meeting number 236 059 509 > > Kind regards > > Davide > > > > -Messaggio originale- > Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di > d.santachi...@libero.it > Inviato: venerdì 4 novembre 2016 10.32 > A: ql-us...@q-v-d.com > Oggetto: [Ql-Users] QL Italian meeting > > Hi everybody, > > I take again the chance to inform that if anybody is interested to > make even a very short speech at our Italian meeting on Sunday 20th of > November, subscriptions are open :-) > > Subjects for intervention are free (i.e. QPC2, SMSQ/E, software or > hardware etc.), baseline is to manage everything via web-ex sessions. > > Instead if there are listeners interested I would need their email > address to send-out the web-ex link (which can be used also on e.g. > tablets with the appropriate app). > > Regards > > Davide > > ___ > QL-Users Mailing List > > ___ > QL-Users Mailing List > > ___ > QL-Users Mailing List > ___ QL-Users Mailing List ___ QL-Users Mailing List
[Ql-Users] QL Italian meeting WebEx session
Hi All, We will restart with the English WebEx session of the 13th Sinclair QL Italian meeting at 15:00 https://meetings.webex.com/collabs/#/meetings/detail?uuid=M2M8EU73OF6BZ0T8BV 7BEWEY0R-1PI1=661457.41064 Meeting number 236 059 509 Kind regards Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di d.santachi...@libero.it Inviato: venerdì 4 novembre 2016 10.32 A: ql-us...@q-v-d.com Oggetto: [Ql-Users] QL Italian meeting Hi everybody, I take again the chance to inform that if anybody is interested to make even a very short speech at our Italian meeting on Sunday 20th of November, subscriptions are open :-) Subjects for intervention are free (i.e. QPC2, SMSQ/E, software or hardware etc.), baseline is to manage everything via web-ex sessions. Instead if there are listeners interested I would need their email address to send-out the web-ex link (which can be used also on e.g. tablets with the appropriate app). Regards Davide ___ QL-Users Mailing List ___ QL-Users Mailing List ___ QL-Users Mailing List
[Ql-Users] R: QL Italian meeting
Hi All, Less than 72 hours for the 13° Italian QL meeting which will be held next Sunday 20th of November - http://www.sinclairql.it/ So far there are still "seats" available for the English web-ex users who would like to attend to the English sessions. As we have no presentations from outside Italy the subjects we will cover will be 100% from the Italian community: - Presentation of latest version of QL distro "Black Phoenix" from Giorgio Garabello http://www.hunggartorino.it/ql/black-phoenix-the-ql-reborn-from-the-ashes/ - QL Software preservation program and Internet BBS from Simone Voltolini https://sinclairql.wordpress.com/ The English session will tentatively start around 14:30 and I plan it should last around 1 hour as minimum. Anybody interested can contact me privately by email and I will send latest on Saturday the web-ex link and information for access via PC or smartphone/tablet Kind regards Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di d.santachi...@libero.it Inviato: venerdì 4 novembre 2016 10.32 A: ql-us...@q-v-d.com Oggetto: [Ql-Users] QL Italian meeting Hi everybody, I take again the chance to inform that if anybody is interested to make even a very short speech at our Italian meeting on Sunday 20th of November, subscriptions are open :-) Subjects for intervention are free (i.e. QPC2, SMSQ/E, software or hardware etc.), baseline is to manage everything via web-ex sessions. Instead if there are listeners interested I would need their email address to send-out the web-ex link (which can be used also on e.g. tablets with the appropriate app). Regards Davide ___ QL-Users Mailing List ___ QL-Users Mailing List
[Ql-Users] QL Italian meeting
Hi everybody, I take again the chance to inform that if anybody is interested to make even a very short speech at our Italian meeting on Sunday 20th of November, subscriptions are open :-) Subjects for intervention are free (i.e. QPC2, SMSQ/E, software or hardware etc.), baseline is to manage everything via web-ex sessions. Instead if there are listeners interested I would need their email address to send-out the web-ex link (which can be used also on e.g. tablets with the appropriate app). Regards Davide ___ QL-Users Mailing List
[Ql-Users] 13th Sinclair QL Italian meeting (- 1 month)
Hi All, The 13th Sinclair QL Italian meeting will take place on Sunday 20th November at DTM Technologies premises in Modena. We will have (most likely in the afternoon) a session in English which might be attended via skype or Web-EX if anybody is interested. We are especially looking for anybody who would like to give presentations of the ongoing projects even if we are talking of minor updates. Anybody who would like to contribute or attend to the English session can contact me privately: d.santachi...@libero.it Thank you Best regards Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di d.santachi...@libero.it Inviato: domenica 18 settembre 2016 11.21 A: ql-us...@q-v-d.com Oggetto: [Ql-Users] 13th Sinclair QL Italian meeting The 13th Sinclair QL Italian meeting will take place on Sunday 20th November at DTM Technologies premises in Modena. We will start around 10:00 and the meeting will continue till 17:00 with a break of one hour for lunch in a tipical "tigelleria" in the nearby shopping center. Information about how to reach the meeting place by car or public transport can be found clicking here: http://www.dtm.it/home.php?id=40201=1 As for the last two Italian meetings we will organize educational sessions, we will have presentation of ongoing projects in Italy and we will organize teleconferences with international users. It will also be possible to take part to the meeting by web-conference. As there will be limited accesses, priority will be given to historical users and users who would like to connect from abroad (at least for the sessions in English language). Details on how to connect to the web-conference will be provided separately to the interested persons. English sessions most likely will be planned in the afternoon also to allow people from US to attend. For information and support: Davide Santachiara er...@libero.it Mobile +39 328 9454484 Web info and updates: Davide Santachiara web site: www.sinclairql.it Giorgio Garabello web site (Quantum Technology): http://www.hunggartorino.it/ql/13-italian-meeting-sinclair-ql/ ___ QL-Users Mailing List
[Ql-Users] 13th Sinclair QL Italian meeting (public personal message)
Hi All, With regard to the last message I confirm as last time we will have in the afternoon a session in English which might be attended via skype (Web-EX or other web-conference software TBD) by people who would like just to listen. But we are especially looking for anybody who would like to give even very short presentations of the ongoing projects even if we are talking of minor updates. I am thinking for instance to SMSQ/E (Wolfgang), QPC2 (Marcel), Q-emuLator (Daniele) and all the other software or hardware developments (ongoing or just dreams) which I have not mentioned. Anybody who would like to contribute can contact me privately: d.santachi...@libero.it Thank you Best regards Davide ___ QL-Users Mailing List
[Ql-Users] 13th Sinclair QL Italian meeting
The 13th Sinclair QL Italian meeting will take place on Sunday 20th November at DTM Technologies premises in Modena. We will start around 10:00 and the meeting will continue till 17:00 with a break of one hour for lunch in a tipical "tigelleria" in the nearby shopping center. Information about how to reach the meeting place by car or public transport can be found clicking here: http://www.dtm.it/home.php?id=40201=1 As for the last two Italian meetings we will organize educational sessions, we will have presentation of ongoing projects in Italy and we will organize teleconferences with international users. It will also be possible to take part to the meeting by web-conference. As there will be limited accesses, priority will be given to historical users and users who would like to connect from abroad (at least for the sessions in English language). Details on how to connect to the web-conference will be provided separately to the interested persons. English sessions most likely will be planned in the afternoon also to allow people from US to attend. For information and support: Davide Santachiara er...@libero.it Mobile +39 328 9454484 Web info and updates: Davide Santachiara web site: www.sinclairql.it Giorgio Garabello web site (Quantum Technology): http://www.hunggartorino.it/ql/13-italian-meeting-sinclair-ql/ ___ QL-Users Mailing List
[Ql-Users] ZM/128 and ZM/hT
The following programs (full versions, not the PD versions previously available) are now available for download on my webpage: ZM/128 (Spectrum 128k emulator - it was release before ZeXcel which runs under pointer environment) ZM/hT (Spectrum 48k dynamic compiler) ZM/ac (sw to exchange programs from ZX to QL environemnt) ZM Manuals Main page is www.sinclairql.it (link available scrolling down) Or directly here: http://www.sinclairql.it/zxemulators.htm#ZMhT Regards Davide ___ QL-Users Mailing List
[Ql-Users] Ciao Adelchi
Yesterday Adelchi Moscardini passed away. I think none outside Italy knew him as he participated mainly to the Italian QL meetings. He was 93 years old and till quite recently he was still active with his QL stuff. Since almost thirty years ago he did a lot of SuperBasic programming which mainly used for himself like preparing football pools coupons (named Totocalcio in Italy) which was something he did for a local lottery office for many years since 1990. Everything was done on a QL including printing. For sure the QL and the programming helped him to keep his brain healthy despite his age (he was still driving at least till two years ago). As he lived in the last years in my town I had many chances to help him keeping in good conditions his QL equipment (he used both super goldcard + qubide QL + QPC) or supporting him sorting out problems. It was always a pleasure meeting ad helping him. regards Davide ___ QL-Users Mailing List
[Ql-Users] R: R: OT HD Recovery
Sorry Simone and everybody, of course this message was intended for the Italian QL mailing list :-) regards Davide -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di Simone Voltolini Inviato: mercoledì 3 agosto 2016 17.36 A: ql-us...@q-v-d.com Oggetto: [Ql-Users] R: OT HD Recovery Come to Italy for a vacation ;) Kora Sistemi Informatici Via Cavour 1, 46030 San Giorgio di Mantova MN Tel/Fax +39 0376 371059 P. IVA: 02048930206 -Messaggio originale- Da: Ql-Users [mailto:ql-users-boun...@lists.q-v-d.com] Per conto di Ralf Reköndt Inviato: mercoledì 3 agosto 2016 17:14 A: ql-us...@q-v-d.com Oggetto: Re: [Ql-Users] OT HD Recovery Ok, I can read every word, but do not understand anything ;-) - Original Message - From: Davide > Scusate l'OT, a proposito di tenere i backup ci sono ancora una > incredibile quantità di persone che pensano che gli hard disk siano > indistruttibili (al di là del fatto che fare un delete accidentale non > richiede molto). ho un amico a cui si è totalmente fuso l'HD del suo > portatile (un seagate), ho fatto qualche prova ed oltre a puzzare di > strinato non viene neanche visto dal BIOS. Conoscete qualche > laboratorio che sia in grado, suppongo utilizzando un elettronica > funzionante, recuperare dati (in particolare si tratterebbe di foto)? > > Grazie > > Davide > > > ___ > QL-Users Mailing List ___ QL-Users Mailing List ___ QL-Users Mailing List ___ QL-Users Mailing List
[Ql-Users] OT HD Recovery
Scusate l'OT, a proposito di tenere i backup ci sono ancora una incredibile quantità di persone che pensano che gli hard disk siano indistruttibili (al di là del fatto che fare un delete accidentale non richiede molto). ho un amico a cui si è totalmente fuso l'HD del suo portatile (un seagate), ho fatto qualche prova ed oltre a puzzare di strinato non viene neanche visto dal BIOS. Conoscete qualche laboratorio che sia in grado, suppongo utilizzando un elettronica funzionante, recuperare dati (in particolare si tratterebbe di foto)? Grazie Davide ___ QL-Users Mailing List