Re: [Ql-Users] Config tool
Derek, I am using a standard 520STe with 4M ram. On 12 August 2014 14:41, Derek Stewart de...@q40.de wrote: HI Michael, I have a couple of Atari machines, but not used them in a long time. I have some QL Emulator disks for the Atari ST, I will see if I can get them off the disks. What version of emulator hardware do you have. Regards, Derek On 12/08/14 09:53, Michael Grunditz wrote: Hi Derek, The problem with the Atari platform is that no recent versions of SMSQ/E works. Does anyone have a binary of the oldest version with GD2? Michael On 12 August 2014 10:40, Derek Stewart de...@q40.de wrote: Hi Michael, There is Menuconfig and Config on Dilwyn's Web site for download. The Atari SMSQ/E has PTR_GEN, WMAN, HOT-REXT built into SMSQ/E. So you can not load in a new version of the PTR_GEN. An updated version of SMSQ/E from the SMSQ/E web site is required. Regards, Derek On 11/08/14 20:05, Michael Grunditz wrote: On 11 August 2014 18:49, gdgqler grggw...@gmail.com wrote: On 11 Aug 2014, at 16:03, Michael Grunditz michael.grund...@gmail.com wrote: I am looking for a config tool , menuconfig or the pointer version. I can't even find the plain config program. You could try uconfig from my website gwiltprogs.info. uconfig produces config blocks for BASIC, C and assembler. Thank you , the config program included works. I am fighting Atari SMSQ/E again , and thought that I might configure the binary. It is a PRG file so I think it shouldn't work and it doesn't. I have also tried to lrespr in a new ptr_gen in order to load a 2.x wman. No luck , it seems like I cannot load a new ptr_gen over the existing one in SMSQ. ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Config tool
Derek, Thats what I do now with a ancient SMSQ/E. But most modern programs needs GD2, thats why I want to upgrade. On 12 August 2014 15:35, Derek Stewart de...@q40.de wrote: Hi Michael, The only Atari ST QL Emulator software I have work with added hardware to the Atari, that is; Atari STFM, STF, Mega ST QVME board is added to the Atari TT, STE VME bus From Jochen Merz's web site: SMSQ/E emulates the display in the monochrome 640x400, because this is the only resolution which is greater or equal to the QL's 512x256. You can use the full resolution, even from BASIC. If you require higher resolutions or even higher compatibility, you can use extra hardware which will generate the original QL display organisation in hardware: Original QL-Emulator for the ATARI: only for ST and Mega ST, requires the ZX8301 display chip of the QL. Emulates 512x256 in 4 colours and 256x256 in 8 colours. Extended QL-Emulator: only for ST and Mega ST. Does not require the ZX8301 and gives 512x256 in 4 colours and 768x280 pixels in 4 colours. Can still be connected to original QL monitors. QVME: plugs into the VME bus of the Mega STE and TT. Fully programmable 4 colour modes from 512x256 up to 1280x900 in multiples of 8 pixels. Horizontal and vertical frequencies are programmable too! --- So I guess you could run monochrome 640x400 on the Atari STE in High Resolution mode. Regards, Derek On 12/08/14 14:12, Michael Grunditz wrote: Derek, I am using a standard 520STe with 4M ram. On 12 August 2014 14:41, Derek Stewart de...@q40.de wrote: HI Michael, I have a couple of Atari machines, but not used them in a long time. I have some QL Emulator disks for the Atari ST, I will see if I can get them off the disks. What version of emulator hardware do you have. Regards, Derek On 12/08/14 09:53, Michael Grunditz wrote: Hi Derek, The problem with the Atari platform is that no recent versions of SMSQ/E works. Does anyone have a binary of the oldest version with GD2? Michael On 12 August 2014 10:40, Derek Stewart de...@q40.de wrote: Hi Michael, There is Menuconfig and Config on Dilwyn's Web site for download. The Atari SMSQ/E has PTR_GEN, WMAN, HOT-REXT built into SMSQ/E. So you can not load in a new version of the PTR_GEN. An updated version of SMSQ/E from the SMSQ/E web site is required. Regards, Derek On 11/08/14 20:05, Michael Grunditz wrote: On 11 August 2014 18:49, gdgqler grggw...@gmail.com wrote: On 11 Aug 2014, at 16:03, Michael Grunditz michael.grund...@gmail.com wrote: I am looking for a config tool , menuconfig or the pointer version. I can't even find the plain config program. You could try uconfig from my website gwiltprogs.info. uconfig produces config blocks for BASIC, C and assembler. Thank you , the config program included works. I am fighting Atari SMSQ/E again , and thought that I might configure the binary. It is a PRG file so I think it shouldn't work and it doesn't. I have also tried to lrespr in a new ptr_gen in order to load a 2.x wman. No luck , it seems like I cannot load a new ptr_gen over the existing one in SMSQ. ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Config tool
As you said, having an STE, there only was the way of using the QVME Card. What have you used up until now? The monochrome software-only version or do you have an QVME? Cheers...Ralf - Original Message - From: Michael Grunditz Derek, Thats what I do now with a ancient SMSQ/E. But most modern programs needs GD2, thats why I want to upgrade. On 12 August 2014 15:35, Derek Stewart de...@q40.de wrote: Hi Michael, The only Atari ST QL Emulator software I have work with added hardware to the Atari, that is; Atari STFM, STF, Mega ST QVME board is added to the Atari TT, STE VME bus From Jochen Merz's web site: SMSQ/E emulates the display in the monochrome 640x400, because this is the only resolution which is greater or equal to the QL's 512x256. You can use the full resolution, even from BASIC. If you require higher resolutions or even higher compatibility, you can use extra hardware which will generate the original QL display organisation in hardware: Original QL-Emulator for the ATARI: only for ST and Mega ST, requires the ZX8301 display chip of the QL. Emulates 512x256 in 4 colours and 256x256 in 8 colours. Extended QL-Emulator: only for ST and Mega ST. Does not require the ZX8301 and gives 512x256 in 4 colours and 768x280 pixels in 4 colours. Can still be connected to original QL monitors. QVME: plugs into the VME bus of the Mega STE and TT. Fully programmable 4 colour modes from 512x256 up to 1280x900 in multiples of 8 pixels. Horizontal and vertical frequencies are programmable too! --- So I guess you could run monochrome 640x400 on the Atari STE in High Resolution mode. Regards, Derek On 12/08/14 14:12, Michael Grunditz wrote: Derek, I am using a standard 520STe with 4M ram. On 12 August 2014 14:41, Derek Stewart de...@q40.de wrote: HI Michael, I have a couple of Atari machines, but not used them in a long time. I have some QL Emulator disks for the Atari ST, I will see if I can get them off the disks. What version of emulator hardware do you have. Regards, Derek On 12/08/14 09:53, Michael Grunditz wrote: Hi Derek, The problem with the Atari platform is that no recent versions of SMSQ/E works. Does anyone have a binary of the oldest version with GD2? Michael On 12 August 2014 10:40, Derek Stewart de...@q40.de wrote: Hi Michael, There is Menuconfig and Config on Dilwyn's Web site for download. The Atari SMSQ/E has PTR_GEN, WMAN, HOT-REXT built into SMSQ/E. So you can not load in a new version of the PTR_GEN. An updated version of SMSQ/E from the SMSQ/E web site is required. Regards, Derek On 11/08/14 20:05, Michael Grunditz wrote: On 11 August 2014 18:49, gdgqler grggw...@gmail.com wrote: On 11 Aug 2014, at 16:03, Michael Grunditz michael.grund...@gmail.com wrote: I am looking for a config tool , menuconfig or the pointer version. I can't even find the plain config program. You could try uconfig from my website gwiltprogs.info. uconfig produces config blocks for BASIC, C and assembler. Thank you , the config program included works. I am fighting Atari SMSQ/E again , and thought that I might configure the binary. It is a PRG file so I think it shouldn't work and it doesn't. I have also tried to lrespr in a new ptr_gen in order to load a 2.x wman. No luck , it seems like I cannot load a new ptr_gen over the existing one in SMSQ. ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Config tool
Is there no recent SMSQ/E for Q40? And why do you need an STE? I have assumed you have one... Cheers...Ralf From: Michael Grunditz Ok I can see now that I need a MegaSTE or a TT for VME cards. This makes me miss my working Q40 .. On 12 August 2014 18:02, Ralf Reköndt wrote: Yes, it does. The STE and the TT both have a VME port. At the last meetings in Eindhoven (Good old days...honestly missed) Jochen always had an STE with a QVME Card. I have used my QVME card with a VME-Adaptor in my MegaST 4. On the other hand: I am sure, that SMSQ/E is still working for an ST(E)/TT with QVME, but I think, only Wolfgang Lenerz can tell, if there is an updated version for the software-only version for it. Cheers...Ralf From: Michael Grunditz By the way,, Does a QVME card work in a STE? I am interested in getting one if it works. On 12 August 2014 17:28, Michael Grunditz wrote: The monochrome version. On 12 August 2014 17:17, Ralf Reköndt wrote: As you said, having an STE, there only was the way of using the QVME Card. What have you used up until now? The monochrome software-only version or do you have an QVME? Cheers...Ralf - Original Message - From: Michael Grunditz Derek, Thats what I do now with a ancient SMSQ/E. But most modern programs needs GD2, thats why I want to upgrade. On 12 August 2014 15:35, Derek Stewart wrote: Hi Michael, The only Atari ST QL Emulator software I have work with added hardware to the Atari, that is; Atari STFM, STF, Mega ST QVME board is added to the Atari TT, STE VME bus From Jochen Merz's web site: SMSQ/E emulates the display in the monochrome 640x400, because this is the only resolution which is greater or equal to the QL's 512x256. You can use the full resolution, even from BASIC. If you require higher resolutions or even higher compatibility, you can use extra hardware which will generate the original QL display organisation in hardware: Original QL-Emulator for the ATARI: only for ST and Mega ST, requires the ZX8301 display chip of the QL. Emulates 512x256 in 4 colours and 256x256 in 8 colours. Extended QL-Emulator: only for ST and Mega ST. Does not require the ZX8301 and gives 512x256 in 4 colours and 768x280 pixels in 4 colours. Can still be connected to original QL monitors. QVME: plugs into the VME bus of the Mega STE and TT. Fully programmable 4 colour modes from 512x256 up to 1280x900 in multiples of 8 pixels. Horizontal and vertical frequencies are programmable too! --- So I guess you could run monochrome 640x400 on the Atari STE in High Resolution mode. Regards, Derek On 12/08/14 14:12, Michael Grunditz wrote: Derek, I am using a standard 520STe with 4M ram. On 12 August 2014 14:41, Derek Stewart wrote: HI Michael, I have a couple of Atari machines, but not used them in a long time. I have some QL Emulator disks for the Atari ST, I will see if I can get them off the disks. What version of emulator hardware do you have. Regards, Derek On 12/08/14 09:53, Michael Grunditz wrote: Hi Derek, The problem with the Atari platform is that no recent versions of SMSQ/E works. Does anyone have a binary of the oldest version with GD2? Michael On 12 August 2014 10:40, Derek Stewart wrote: Hi Michael, There is Menuconfig and Config on Dilwyn's Web site for download. The Atari SMSQ/E has PTR_GEN, WMAN, HOT-REXT built into SMSQ/E. So you can not load in a new version of the PTR_GEN. An updated version of SMSQ/E from the SMSQ/E web site is required. Regards, Derek On 11/08/14 20:05, Michael Grunditz wrote: On 11 August 2014 18:49, gdgqler wrote: On 11 Aug 2014, at 16:03, Michael Grunditz wrote: I am looking for a config tool , menuconfig or the pointer version. I can't even find the plain config program. You could try uconfig from my website gwiltprogs.info. uconfig produces config blocks for BASIC, C and assembler. Thank you , the config program included works. I am fighting Atari SMSQ/E again , and thought that I might configure the binary. It is a PRG file so I think it shouldn't work and it doesn't. I have also tried to lrespr in a new ptr_gen in order to load a 2.x wman. No luck , it seems like I cannot load a new ptr_gen over the existing one in SMSQ. ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Config tool
I have a STE but not a MegaSTE , different machines =) And I once owned a Q40 and someone on this bought it. On 12 August 2014 18:29, Ralf Reköndt ralf.rekoe...@t-online.de wrote: Is there no recent SMSQ/E for Q40? And why do you need an STE? I have assumed you have one... Cheers...Ralf From: Michael Grunditz Ok I can see now that I need a MegaSTE or a TT for VME cards. This makes me miss my working Q40 .. On 12 August 2014 18:02, Ralf Reköndt wrote: Yes, it does. The STE and the TT both have a VME port. At the last meetings in Eindhoven (Good old days...honestly missed) Jochen always had an STE with a QVME Card. I have used my QVME card with a VME-Adaptor in my MegaST 4. On the other hand: I am sure, that SMSQ/E is still working for an ST(E)/TT with QVME, but I think, only Wolfgang Lenerz can tell, if there is an updated version for the software-only version for it. Cheers...Ralf From: Michael Grunditz By the way,, Does a QVME card work in a STE? I am interested in getting one if it works. On 12 August 2014 17:28, Michael Grunditz wrote: The monochrome version. On 12 August 2014 17:17, Ralf Reköndt wrote: As you said, having an STE, there only was the way of using the QVME Card. What have you used up until now? The monochrome software-only version or do you have an QVME? Cheers...Ralf - Original Message - From: Michael Grunditz Derek, Thats what I do now with a ancient SMSQ/E. But most modern programs needs GD2, thats why I want to upgrade. On 12 August 2014 15:35, Derek Stewart wrote: Hi Michael, The only Atari ST QL Emulator software I have work with added hardware to the Atari, that is; Atari STFM, STF, Mega ST QVME board is added to the Atari TT, STE VME bus From Jochen Merz's web site: SMSQ/E emulates the display in the monochrome 640x400, because this is the only resolution which is greater or equal to the QL's 512x256. You can use the full resolution, even from BASIC. If you require higher resolutions or even higher compatibility, you can use extra hardware which will generate the original QL display organisation in hardware: Original QL-Emulator for the ATARI: only for ST and Mega ST, requires the ZX8301 display chip of the QL. Emulates 512x256 in 4 colours and 256x256 in 8 colours. Extended QL-Emulator: only for ST and Mega ST. Does not require the ZX8301 and gives 512x256 in 4 colours and 768x280 pixels in 4 colours. Can still be connected to original QL monitors. QVME: plugs into the VME bus of the Mega STE and TT. Fully programmable 4 colour modes from 512x256 up to 1280x900 in multiples of 8 pixels. Horizontal and vertical frequencies are programmable too! --- So I guess you could run monochrome 640x400 on the Atari STE in High Resolution mode. Regards, Derek On 12/08/14 14:12, Michael Grunditz wrote: Derek, I am using a standard 520STe with 4M ram. On 12 August 2014 14:41, Derek Stewart wrote: HI Michael, I have a couple of Atari machines, but not used them in a long time. I have some QL Emulator disks for the Atari ST, I will see if I can get them off the disks. What version of emulator hardware do you have. Regards, Derek On 12/08/14 09:53, Michael Grunditz wrote: Hi Derek, The problem with the Atari platform is that no recent versions of SMSQ/E works. Does anyone have a binary of the oldest version with GD2? Michael On 12 August 2014 10:40, Derek Stewart wrote: Hi Michael, There is Menuconfig and Config on Dilwyn's Web site for download. The Atari SMSQ/E has PTR_GEN, WMAN, HOT-REXT built into SMSQ/E. So you can not load in a new version of the PTR_GEN. An updated version of SMSQ/E from the SMSQ/E web site is required. Regards, Derek On 11/08/14 20:05, Michael Grunditz wrote: On 11 August 2014 18:49, gdgqler wrote: On 11 Aug 2014, at 16:03, Michael Grunditz wrote: I am looking for a config tool , menuconfig or the pointer version. I can't even find the plain config program. You could try uconfig from my website gwiltprogs.info. uconfig produces config blocks for BASIC, C and assembler. Thank you , the config program included works. I am fighting Atari SMSQ/E again , and thought that I might configure the binary. It is a PRG file so I think it shouldn't work and it doesn't. I have also tried to lrespr in a new ptr_gen in order to load a 2.x wman. No luck , it seems like I cannot load a new ptr_gen over the existing one in SMSQ. ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Config tool
On 11 Aug 2014, at 16:03, Michael Grunditz michael.grund...@gmail.com wrote: I am looking for a config tool , menuconfig or the pointer version. I can't even find the plain config program. You could try uconfig from my website gwiltprogs.info. uconfig produces config blocks for BASIC, C and assembler. George ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
