I have a STE but not a MegaSTE , different machines =) And I once owned a Q40 and someone on this bought it.
On 12 August 2014 18:29, Ralf Reköndt <[email protected]> wrote: > Is there no recent SMSQ/E for Q40? And why do you need an STE? I have > assumed you have one... > > Cheers...Ralf > > From: "Michael Grunditz" > > > Ok > > I can see now that I need a MegaSTE or a TT for VME cards. > This makes me miss my working Q40 .. > > On 12 August 2014 18:02, Ralf Reköndt wrote: >> >> Yes, it does. The STE and the TT both have a VME port. At the last >> meetings >> in Eindhoven (Good old days...honestly missed) Jochen always had an STE >> with >> a QVME Card. I have used my QVME card with a VME-Adaptor in my MegaST 4. >> >> On the other hand: I am sure, that SMSQ/E is still working for an ST(E)/TT >> with QVME, but I think, only Wolfgang Lenerz can tell, if there is an >> updated version for the software-only version for it. >> >> Cheers...Ralf >> >> From: "Michael Grunditz" >> >> >> By the way,, >> >> Does a QVME card work in a STE? I am interested in getting one if it >> works. >> >> On 12 August 2014 17:28, Michael Grunditz wrote: >>> >>> >>> The monochrome version. >>> >>> >>> On 12 August 2014 17:17, Ralf Reköndt wrote: >>>> >>>> >>>> As you said, having an STE, there only was the way of using the QVME >>>> Card. >>>> What have you used up until now? The monochrome software-only version or >>>> do >>>> you have an QVME? >>>> >>>> Cheers...Ralf >>>> >>>> ----- Original Message ----- From: "Michael Grunditz" >>>> >>>> >>>>> Derek, >>>>> >>>>> Thats what I do now with a ancient SMSQ/E. But most "modern" programs >>>>> needs GD2, thats why I want to upgrade. >>>>> >>>>> On 12 August 2014 15:35, Derek Stewart wrote: >>>>>> >>>>>> >>>>>> >>>>>> Hi Michael, >>>>>> >>>>>> The only Atari ST QL Emulator software I have work with added hardware >>>>>> to >>>>>> the Atari, that is; Atari STFM, STF, Mega ST >>>>>> >>>>>> QVME board is added to the Atari TT, STE VME bus >>>>>> >>>>>> From Jochen Merz's web site: >>>>>> >>>>>> SMSQ/E emulates the display in the monochrome 640x400, because this is >>>>>> the >>>>>> only resolution which is greater or equal to the QL's 512x256. You can >>>>>> use >>>>>> the full resolution, even from BASIC. If you require higher >>>>>> resolutions >>>>>> or >>>>>> even higher compatibility, you can use extra hardware which will >>>>>> generate >>>>>> the original QL display organisation in hardware: >>>>>> >>>>>> Original QL-Emulator for the ATARI: only for ST and Mega ST, requires >>>>>> the >>>>>> ZX8301 display chip of the QL. Emulates 512x256 in 4 colours and >>>>>> 256x256 >>>>>> in >>>>>> 8 colours. >>>>>> >>>>>> Extended QL-Emulator: only for ST and Mega ST. Does not require the >>>>>> ZX8301 >>>>>> and gives 512x256 in 4 colours and 768x280 pixels in 4 colours. Can >>>>>> still >>>>>> be >>>>>> connected to original QL monitors. >>>>>> >>>>>> QVME: plugs into the VME bus of the Mega STE and TT. Fully >>>>>> programmable >>>>>> 4 >>>>>> colour modes from 512x256 up to 1280x900 in multiples of 8 pixels. >>>>>> Horizontal and vertical frequencies are programmable too! >>>>>> >>>>>> --- >>>>>> >>>>>> So I guess you could run monochrome 640x400 on the Atari STE in High >>>>>> Resolution mode. >>>>>> >>>>>> Regards, >>>>>> >>>>>> Derek >>>>>> >>>>>> >>>>>> On 12/08/14 14:12, Michael Grunditz wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Derek, >>>>>>> >>>>>>> I am using a standard 520STe with 4M ram. >>>>>>> >>>>>>> On 12 August 2014 14:41, Derek Stewart wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> HI Michael, >>>>>>>> >>>>>>>> I have a couple of Atari machines, but not used them in a long time. >>>>>>>> >>>>>>>> I have some QL Emulator disks for the Atari ST, I will see if I can >>>>>>>> get >>>>>>>> them >>>>>>>> off the disks. >>>>>>>> >>>>>>>> What version of emulator hardware do you have. >>>>>>>> >>>>>>>> Regards, >>>>>>>> >>>>>>>> Derek >>>>>>>> >>>>>>>> >>>>>>>> On 12/08/14 09:53, Michael Grunditz wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Hi Derek, >>>>>>>>> >>>>>>>>> The problem with the Atari platform is that no recent versions of >>>>>>>>> SMSQ/E works. Does anyone have a binary of the oldest version with >>>>>>>>> GD2? >>>>>>>>> >>>>>>>>> Michael >>>>>>>>> >>>>>>>>> On 12 August 2014 10:40, Derek Stewart wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Hi Michael, >>>>>>>>>> >>>>>>>>>> There is Menuconfig and Config on Dilwyn's Web site for download. >>>>>>>>>> >>>>>>>>>> The Atari SMSQ/E has PTR_GEN, WMAN, HOT-REXT built into SMSQ/E. So >>>>>>>>>> you >>>>>>>>>> can >>>>>>>>>> not load in a new version of the PTR_GEN. >>>>>>>>>> >>>>>>>>>> An updated version of SMSQ/E from the SMSQ/E web site is required. >>>>>>>>>> >>>>>>>>>> Regards, >>>>>>>>>> >>>>>>>>>> Derek >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On 11/08/14 20:05, Michael Grunditz wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On 11 August 2014 18:49, gdgqler wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On 11 Aug 2014, at 16:03, Michael Grunditz >>>>>>>>>>>> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> I am looking for a config tool , menuconfig or the pointer >>>>>>>>>>>>> version. >>>>>>>>>>>>> I >>>>>>>>>>>>> can't even find the plain config program. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> You could try uconfig from my website gwiltprogs.info. uconfig >>>>>>>>>>>> produces >>>>>>>>>>>> config blocks for BASIC, C and assembler. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Thank you , the "config" program included works. >>>>>>>>>>> I am fighting Atari SMSQ/E again , and thought that I might >>>>>>>>>>> configure >>>>>>>>>>> the binary. >>>>>>>>>>> It is a PRG file so I think it shouldn't work and it doesn't. >>>>>>>>>>> >>>>>>>>>>> I have also tried to lrespr in a new ptr_gen in order to load a >>>>>>>>>>> 2.x >>>>>>>>>>> wman. No luck , it seems like I cannot load a new ptr_gen over >>>>>>>>>>> the >>>>>>>>>>> existing one in SMSQ. > > > _______________________________________________ > QL-Users Mailing List > http://www.q-v-d.demon.co.uk/smsqe.htm _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
