Re: [Ql-Users] Microdrive pinch rollers: Any sources out there?
Today's the day! My 3M felt order arrived, and I have created the .SVG file to operate the laser cutter. I'll do some test cuts to get the correct intensity, and then I'll churn out several hundred new felt pads which accidentally exceed the specifications of the original pads. This material has a lower surface friction in contact with the back of tape and will cause significantly less wear and less drag. If I can post a photo to the list (suitably shrunk down) I'll try to show you all the laser cutting process. Dave On Sun, Jan 26, 2014 at 2:38 PM, Alexandre Souza alexandre.tabaj...@gmail.com wrote: If you need some cartridges to use as part of the display - let me know and I can let you have some of my better ones - I have a few which seem to be in good condition - although not sure how long they will last. One suggestion is to apply glue to the felt pad before it splits - has anyone tried this? I did. Got some old cassete tapes (brand new, pre-recorded tapes from an english course), took off the pads, cut into a suitable size and glued using cyanoacrilate glue on the place of the old pads. Works like a charm. ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm -- Dave Park Sandy Electronics, LLC d...@sinclairql.com ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Microdrive pinch rollers: Any sources out there?
If you need some cartridges to use as part of the display - let me know and I can let you have some of my better ones - I have a few which seem to be in good condition - although not sure how long they will last. One suggestion is to apply glue to the felt pad before it splits - has anyone tried this? I did. Got some old cassete tapes (brand new, pre-recorded tapes from an english course), took off the pads, cut into a suitable size and glued using cyanoacrilate glue on the place of the old pads. Works like a charm. ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Microdrive pinch rollers: Any sources out there?
On 23/01/2014 11:20, Rich Mellor wrote: I have 3 replacement rollers left in stock See http://www.sellmyretro.com/offer/details/Replacement-Sinclair-QL-~~-ZX-Microdrive-Rollers-2630 I have also been speaking with Louis Siedelmann who got these made about making some more Rich www.rwapsoftware.co.uk That sounds excellent! I'm just prepping a QL for a hands-on display as part of an exhibition at the Oxford Museum of the History of Science, probably during May and it has a split roller. I might check out the other QL at the same time. I've tried some Microdrive cartridges, but they all seem to have succumb to the dreaded perished foam disease. A couple of years ago they were fine. :-/ Still, at least the MICE ROM and mouse still works fine, as you can see... Steve ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Microdrive pinch rollers: Any sources out there?
I am looking at laser-cutting some felt pads - it's highly accurate... If I have the dimensions of the rollers, I can also make some. On Fri, Jan 24, 2014 at 1:54 PM, Stephen Usher st...@lingula.org.uk wrote: On 23/01/2014 11:20, Rich Mellor wrote: I have 3 replacement rollers left in stock See http://www.sellmyretro.com/offer/details/Replacement- Sinclair-QL-~~-ZX-Microdrive-Rollers-2630 I have also been speaking with Louis Siedelmann who got these made about making some more Rich www.rwapsoftware.co.uk That sounds excellent! I'm just prepping a QL for a hands-on display as part of an exhibition at the Oxford Museum of the History of Science, probably during May and it has a split roller. I might check out the other QL at the same time. I've tried some Microdrive cartridges, but they all seem to have succumb to the dreaded perished foam disease. A couple of years ago they were fine. :-/ Still, at least the MICE ROM and mouse still works fine, as you can see... Steve ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm -- Dave Park Sandy Electronics, LLC d...@sinclairql.com ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Microdrive pinch rollers: Any sources out there?
On 24/01/2014 19:54, Stephen Usher wrote: Still, at least the MICE ROM and mouse still works fine, as you can see... Or you would have if the list had not stripped the attachment. But you can see here: http://www.lingula.org.uk/~steve/images/QL-mice.jpg Steve ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Microdrive pinch rollers: Any sources out there?
Steve, If you need some cartridges to use as part of the display - let me know and I can let you have some of my better ones - I have a few which seem to be in good condition - although not sure how long they will last. One suggestion is to apply glue to the felt pad before it splits - has anyone tried this? Rich www.rwapsoftware.co.uk On January 24, 2014 at 7:54 PM Stephen Usher st...@lingula.org.uk wrote: On 23/01/2014 11:20, Rich Mellor wrote: I have 3 replacement rollers left in stock See http://www.sellmyretro.com/offer/details/Replacement-Sinclair-QL-~~-ZX-Microdrive-Rollers-2630 I have also been speaking with Louis Siedelmann who got these made about making some more Rich www.rwapsoftware.co.uk That sounds excellent! I'm just prepping a QL for a hands-on display as part of an exhibition at the Oxford Museum of the History of Science, probably during May and it has a split roller. I might check out the other QL at the same time. I've tried some Microdrive cartridges, but they all seem to have succumb to the dreaded perished foam disease. A couple of years ago they were fine. :-/ Still, at least the MICE ROM and mouse still works fine, as you can see... Steve ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm Rich Mellor RWAP Software www.rwapsoftware.co.uk www.sellmyretro.com ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Microdrive pinch rollers: Any sources out there?
On 24/01/2014 20:07, Rich Mellor (RWAP) wrote: Steve, If you need some cartridges to use as part of the display - let me know and I can let you have some of my better ones - I have a few which seem to be in good condition - although not sure how long they will last. One suggestion is to apply glue to the felt pad before it splits - has anyone tried this? I read of someone replacing the sorbo rubber with a replacement bit of sponge and sticking the top of the old pad on that. Steve P.S. It's amazing what you find in the loft. I've just been up there and forgot that in the job lot of Spectrum stuff I picked up a few years ago I also had a 16K Memopak for the ZX81, a Currah microspeech and a brand new Microdrive cartridge still in its bubble pack! ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Microdrive pinch rollers: Any sources out there?
I just measured on an unopened cartridge (until now) and the pad is 4mm long, 3mm deep, and 1.5mm high. The microdrive capstan is 5.0 mm high, 6.0 mm diameter, with a 1.75mm hole, on Samsung built microdrives. Dave On Fri, Jan 24, 2014 at 2:19 PM, Stephen Usher st...@lingula.org.uk wrote: On 24/01/2014 20:07, Rich Mellor (RWAP) wrote: Steve, If you need some cartridges to use as part of the display - let me know and I can let you have some of my better ones - I have a few which seem to be in good condition - although not sure how long they will last. One suggestion is to apply glue to the felt pad before it splits - has anyone tried this? I read of someone replacing the sorbo rubber with a replacement bit of sponge and sticking the top of the old pad on that. Steve P.S. It's amazing what you find in the loft. I've just been up there and forgot that in the job lot of Spectrum stuff I picked up a few years ago I also had a 16K Memopak for the ZX81, a Currah microspeech and a brand new Microdrive cartridge still in its bubble pack! ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm -- Dave Park Sandy Electronics, LLC d...@sinclairql.com ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Microdrive pinch rollers: Any sources out there?
As an FYI, I have obtained from 3M some of the correct material for audio felt pads, of the type they supplied to BASF and TDK. It even has their adhesive backing :) I'll laser cut it into 4x3mm pieces and mail 10 out to anyone who wants them for $2, £3, €3.60... I'll post payment details in a couple of days. Dave On Fri, Jan 24, 2014 at 2:28 PM, Dave Park d...@sinclairql.com wrote: I just measured on an unopened cartridge (until now) and the pad is 4mm long, 3mm deep, and 1.5mm high. The microdrive capstan is 5.0 mm high, 6.0 mm diameter, with a 1.75mm hole, on Samsung built microdrives. Dave On Fri, Jan 24, 2014 at 2:19 PM, Stephen Usher st...@lingula.org.ukwrote: On 24/01/2014 20:07, Rich Mellor (RWAP) wrote: Steve, If you need some cartridges to use as part of the display - let me know and I can let you have some of my better ones - I have a few which seem to be in good condition - although not sure how long they will last. One suggestion is to apply glue to the felt pad before it splits - has anyone tried this? I read of someone replacing the sorbo rubber with a replacement bit of sponge and sticking the top of the old pad on that. Steve P.S. It's amazing what you find in the loft. I've just been up there and forgot that in the job lot of Spectrum stuff I picked up a few years ago I also had a 16K Memopak for the ZX81, a Currah microspeech and a brand new Microdrive cartridge still in its bubble pack! ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm -- Dave Park Sandy Electronics, LLC d...@sinclairql.com -- Dave Park Sandy Electronics, LLC d...@sinclairql.com ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Microdrive pinch rollers: Any sources out there?
I have 3 replacement rollers left in stock See http://www.sellmyretro.com/offer/details/Replacement-Sinclair-QL-~~-ZX-Microdrive-Rollers-2630 I have also been speaking with Louis Siedelmann who got these made about making some more Rich www.rwapsoftware.co.uk On 23/01/2014 01:53, Dave Park wrote: Rich at RWAP was holding some stock of newly made replacements, I believe. Dave On Tue, Jan 21, 2014 at 3:17 PM, Stephen Usher st...@lingula.org.uk wrote: I was just wondering if there were any sources of pinch rollers compatible as replacements in Microdrives. If not, I'm sure that there would be a market for them in the retro scene, both QL and ZX Spectrum. Rich, any ideas? Steve -- --- Nostalgia isn't as good as it used to be. ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm -- Rich Mellor RWAP Services Specialist Enuuk Auction Programming Services www.rwapservices.co.uk ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Microdrive pinch rollers: Any sources out there?
Rich at RWAP was holding some stock of newly made replacements, I believe. Dave On Tue, Jan 21, 2014 at 3:17 PM, Stephen Usher st...@lingula.org.uk wrote: I was just wondering if there were any sources of pinch rollers compatible as replacements in Microdrives. If not, I'm sure that there would be a market for them in the retro scene, both QL and ZX Spectrum. Rich, any ideas? Steve -- --- Nostalgia isn't as good as it used to be. ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm -- Dave Park Sandy Electronics, LLC d...@sinclairql.com ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
[Ql-Users] Microdrive pinch rollers: Any sources out there?
I was just wondering if there were any sources of pinch rollers compatible as replacements in Microdrives. If not, I'm sure that there would be a market for them in the retro scene, both QL and ZX Spectrum. Rich, any ideas? Steve -- --- Nostalgia isn't as good as it used to be. ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm