but no).
Libmysqlclient is written in C and used for programs to connect to Mysql
and up to the 10.3.35-MariaDB Server version - newer Mariadb versions
uses/wants the libmariadbclient to commmunicate.
So You may/can use Mariadb for Qmail up to Mariadb version 10.3.35 - at
least I did not have any issues
FYI
When I did roll on to Rocky8 and now Rocky 9 I found out that
the 10.3.35-MariaDB Server version - is the last version compliant with
Qmail software.
I think recall it is libmysqlclient
that no longer is compliant and therefore causing errors.
/Finn
Den 11-04-2024 kl. 08:00 skrev Tony
...@ycs.com.au dickerydock
I did not specify the allocation of space
regards
Anthony White
On 10/4/24 22:04, Qmail wrote:
Hi again
Hmm
I tried this
./vadduser -q 4 test1@mydomain test
and
./vadduser -q NOQUOTA test@mydomain test
and there is NO ,4000C in my database
Whats on You
for the response but all the users were
created with vadduser.
regards
Anthony White
On 10/4/24 19:08, Qmail wrote:
Hi Tony.
Just checked my database and I do not have that value in any of my
entries.
but ',4000C' seems to me as a value from a list where values was
inserted into the new database
Hi Tony.
Just checked my database and I do not have that value in any of my entries.
but ',4000C' seems to me as a value from a list where values was
inserted into the new database - just a guess ?
I'm running latest qmail on a Rocky 9 latest and greatest
/Finn
Den 10-04-2024 kl. 10:38
Hi
Wonder where Qmail would be without people like Eric ?
Excellent support - respect
/Finn
Den 08-04-2024 kl. 06:21 skrev Eric Broch:
Good
On Apr 7, 2024, at 10:19 PM, Biju Jose <mailto:bijuko...@outlook.com>> wrote:
renamed assign.rpmsave to assign
renamed cdb.rpmsa
Hi.
Wouldn't it be to just stop qmail and move the qmail-remote.orig to
qmail-remote and start qmail.
And then start from scratch with Dkim ?
/Finn
Den 07-04-2024 kl. 16:31 skrev Biju Jose:
@40006612abd814cc842c warning: trouble injecting bounce message,
will try later
server, mydomain.it
<http://mydomain.it>, which I am migrating to another server, I would
like to block my users and block sending with webmail and with pop3 and
imap4,
possible?
Thank you
#rpm -qa qmail*
qmail-pop3d-toaster-1.03-1.3.22
qmailtoaster-plus.repo-0.2-2
qmailmrtg-toaster-4.2
like to block my users and block sending with webmail and with pop3 and
imap4,
possible?
Thank you
#rpm -qa qmail*
qmail-pop3d-toaster-1.03-1.3.22
qmailtoaster-plus.repo-0.2-2
qmailmrtg-toaster-4.2-1.3.7
qmailtoaster-plus-0.3.2-1.4.19
qmail-toaster-1.03-1.3.22
qmailadmin-toaster-1.2.16-1.4.0
Hey Remo.
I also runs Qmail on a Rocky9 but not using latest Mariadb.
Cheers
Den 20-08-2023 kl. 00:57 skrev Remo Mattei:
I am running two qmail boxes with rocky 9 all good.
--
Sent from iPhone
On sabato, ago 19, 2023 at 15:24, Qmail mailto:qm...@mailonly.dk>> wrote:
Hi .
Hi .
You need to stick to Mysql.
Latest Mariadb has changed and is not backwards compliant with mysql
any more - so it is not straight ahead using latest mariadb and may
require some changes in the qmail line of software.
(wrote about it back in March).
(I'm running mariadb on my Rocky8
yeps - received
Den 07-07-2023 kl. 16:03 skrev Rvaught:
received
-Original Message-
From: Eric Broch
Sent: Friday, July 07, 2023 9:15 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] test
test
-
To
Hi Eric.
/etc/spamdyke/spamdyke.conf
/Finn
Den 12-05-2023 kl. 11:26 skrev Eric Broch:
Forgive my ignorance, but I have never configured qmail to use spamhaus,
where is the setting?
On 5/11/2023 10:41 PM, Remo Mattei wrote:
Yes Eric
I have customers on the new server and I would like
<http://zen.spamhaus.org/> I get
the following message
Hi. This is the qmail-send program at smtp
<http://smtp.mattei.org/>.mail.me <http://mail.me/>.
I'm afraid I wasn't able to deliver your message to the following
addresses.
This is a permanent error; I've given up. Sorry
Hi Remo.
FYI
Back in march I did reply to the qmaillist and to You (a question about
going from Centos7 to Rocky9) and got same message when my mailserver
tried to deliver a mail to You :
"
Hi. This is the qmail-send program at MY.SERVER.DK
I'm afraid I wasn't able to deliver your me
Hi Eric.
Yes it works
/Finn
Den 10-03-2023 kl. 19:52 skrev Eric Broch:
Doesn't the script work on qmailtoaster.org ?!
1. Vpopmail Many-Domain MySQL backend
2. Minimal Install RHEL9 DerivativeSprindale
He hehh to Your question no plans since I'm on Rocky8 but main issue
is if You have converted to 'Many Domains' on You're Centos7 because
that will be required.
Cheers,
Finn
Den 10-03-2023 kl. 04:40 skrev Remo:
Hello anyone planning to build a rocky 9 and migrate the domains from
centOS 7
changes in the qmail line of software.
But qmail running on the Rocky9 release was up though I did not migrate
domains from my Rocky8 because of the database issue.
Next is if You've converted to 'Many Domains' on Your Centos7 instance -
that is required I believe.
I'll have a go, if time
-2022 kl. 10:56 skrev Cinghiuz:
Hi Finn,
thank you for your prompt reply!
I installed and enabled rsyslog and now I have /var/log/maillog.
I commented out the jail about smtptx and now fail2ban works fine.
Thank you!
Cesare
Il 10/11/2022 10:23, Qmail ha scritto:
Hi Cesare.
What goes
.
Fail2ban doesn't start because I haven't /var/log/maillog and
/var/log/qmail/smtptx/current.
Under /var/log I see these dirs:
dovecot-lda
httpd
mariadb
php-fpm
qmail/send
qmail/smtp
qmail/smtps
qmail/submission
qmail/vpopmaild
roundcubemail
rspamd
and dovecot.log file
Of course there are many dirs
Hi Quinn.
Just think I've seen this looong ago... may be I'm wrong
Check the ports for smtp / pop in outlook - it may relate to the
portnumbers - if it needs to be encrypted try using port smtp 465 / pop 995.
( it requires the ports are in use by the QMT server ofcourse)
Hope this may help
Try 'systemctl status qmail' to see if that reveils anything useful
/Finn
Den 23-10-2021 kl. 16:56 skrev Eric Broch:
It's usually in the 'start)' section of the script, Here's my update
with the 'sleep 1' added :
start)
# have a silent kill in case someone tries to start the service
as below: still
hacing limit of 10
:allow,BADMIMETYPE="",BADLOADERTYPE="M",CHKUSER_RCPTLIMIT="5000",CHKUSER_WRONGRCPTLIMIT="5000",NOP0FCHECK="1",QMAILQUEUE="/var/qmail/bin/simscan",DKQUEUE="/var/qmail/bin/qmail-queue.orig&quo
Hi Eric.
FYI
Just made an update of my Qmail running on Centos8.
This update which included qmail 1.03-3.3.1.qt-el8 did owerwrite my
/var/qmail/bin/qmail-remote.
- I have downloaded
raw.githubusercontent.com/qmtoaster/dkim/master/qmail-remote
- done the mv /var/qmail/bin/qmail-remote
sorry - the fix may be to increase the softlimit ..
Den 23-03-2021 kl. 15:52 skrev Qmail:
Hi Remo.
Isn't the softlimit issue ?
(My settings in my smtps run file: exec /usr/bin/softlimit -m 12800)
Regards
Finn
Den 23-03-2021 kl. 15:43 skrev Remo Mattei:
Hello guys, I cannot remember
Hi Remo.
Isn't the softlimit issue ?
(My settings in my smtps run file: exec /usr/bin/softlimit -m 12800)
Regards
Finn
Den 23-03-2021 kl. 15:43 skrev Remo Mattei:
Hello guys, I cannot remember what was the fix for the
qmail-smtpd: qq soft reject (mail server temporarily rejected message
file - and then he will face some
other difficulties ;-) )
/Finn
Den 24-01-2021 kl. 18:17 skrev Eric Broch:
Are there two submission daemons running?
Restart server.
On 1/24/2021 9:10 AM, qm...@mailonly.dk wrote:
You need to have Your /var/qmail/supervise/smtp/run (port 25) as below
#!/bin
You need to have Your /var/qmail/supervise/smtp/run (port 25) as below
#!/bin/sh
QMAILDUID=`id -u vpopmail`
NOFILESGID=`id -g vpopmail`
MAXSMTPD=`cat /var/qmail/control/concurrencyincoming`
SPAMDYKE="/usr/bin/spamdyke"
SPAMDYKE_CONF="/etc/spamdyke/spamdyke.conf"
SMTPD="/
Hi Remo / all
Found this :
https://www.cyberciti.biz/linux-news/centos-linux-reborn-as-rocky-linux-enterprise-operating-system/
/Finn
Den 10-12-2020 kl. 21:08 skrev Remo Mattei:
what link did you use to get the Rocky Linux ISO? I just did a quick
search didn’t see much of an ISO.
Thanks
OP0FCHECK="1"
my smtp run is below
#!/bin/sh
QMAILDUID=`id -u vpopmail`
NOFILESGID=`id -g vpopmail`
MAXSMTPD=`cat /var/qmail/control/concurrencyincoming`
#SPAMDYKE="/usr/bin/spamdyke"
#SPAMDYKE_CONF="/etc/spamdyke/spamdyke.conf"
SMTPD="/var/qmail/bin/qmail-smtpd&quo
Hi Eric.
Hopefully it works now ;-)
/Finn
Den 21-10-2020 kl. 16:35 skrev Miguel Angel Amable Ventura:
Received Eric!
El 20/10/2020 a las 06:00 p. m., Eric Broch escribió:
Hi list,
I'm switching over to the new qmailtoaster-list server. If you get an
error sending to the list let me know.
> to: (unknown)
origin_ip: 192.12.78.22 origin_rdns:
> x...@xxx.com <mailto:x...@xxx.com> <mailto:x...@xxx.com
<mailto:x...@xxx.com>> auth: (unknown) encryption: (none)
> reason: TIMEOUT
>
> MY OS is CentOS Linux release 7.7.1908 (Core)
own) encryption: (none)
reason: TIMEOUT
Oct 16 14:33:25 mail spamdyke[5225]: TIMEOUT from: x...@xxx.com
<mailto:x...@xxx.com> to: (unknown) origin_ip: 192.12.78.22 origin_rdns:
x...@xxx.com <mailto:x...@xxx.com> auth: (unknown) encryption: (none)
reason: TIMEOUT
MY OS is CentOS L
ges allright
/Finn
Den 26-09-2020 kl. 18:31 skrev Eric Broch:
Something else I noticed on my CentOS 8/QMT MariaDB:
When I type
# man qmail-smtpd
It's blank.
Can you try it on yours and let me know if it works?
Eric
On 9/26/2020 10:25 AM, qm...@mailonly.dk wrote:
Hi Eric.
Sa-update r
aDB:
When I type
# man qmail-smtpd
It's blank.
Can you try it on yours and let me know if it works?
Eric
On 9/26/2020 10:25 AM, qm...@mailonly.dk wrote:
Hi Eric.
Sa-update runs as expected - after doing as below written, sa-update
starts and stops as per the sa-update.timer schedule.
To
I get the manpages allright
/Finn
Den 26-09-2020 kl. 18:31 skrev Eric Broch:
Something else I noticed on my CentOS 8/QMT MariaDB:
When I type
# man qmail-smtpd
It's blank.
Can you try it on yours and let me know if it works?
Eric
On 9/26/2020 10:25 AM, qm...@mailonly.dk wrote:
Hi Eric
ction data needed.
I ran into 2 issues :
first issue was /var/qmail/supervise/smtps/run that needs to
include the export FORCETLS=0 and export SMTPAUTH="!+cram" in order
to be able to submit mail (just like You helped me solve same thing
in the Centos 7 version)
the second issue is
:
first issue was /var/qmail/supervise/smtps/run that needs to
include the export FORCETLS=0 and export SMTPAUTH="!+cram" in
order to be able to submit mail (just like You helped me solve
same thing in the Centos 7 version)
the second issue is sa-update - it comes to abrupt stop
) and recently 7 over the years I
had difficulties converting to EPEL ClamAV - so I decided to go
for the latest and greatest QMT for Centos 8
Using Your instructions from 'Migrate to Centos 7/QMT host' I got
all production data needed.
I ran into 2 issues :
first issue was /var/qmail
es :
first issue was /var/qmail/supervise/smtps/run that needs to
include the export FORCETLS=0 and export SMTPAUTH="!+cram" in order
to be able to submit mail (just like You helped me solve same thing
in the Centos 7 version)
the second issue is sa-update - it comes to abrupt stop
instructions from 'Migrate to Centos 7/QMT host' I got
all production data needed.
I ran into 2 issues :
first issue was /var/qmail/supervise/smtps/run that needs to
include the export FORCETLS=0 and export SMTPAUTH="!+cram" in order
to be able to submit mail (just like You helpe
to Centos 7/QMT host' I got
all production data needed.
I ran into 2 issues :
first issue was /var/qmail/supervise/smtps/run that needs to
include the export FORCETLS=0 and export SMTPAUTH="!+cram" in order
to be able to submit mail (just like You helped me solve same thing
in th
production data needed.
I ran into 2 issues :
first issue was /var/qmail/supervise/smtps/run that needs to include
the export FORCETLS=0 and export SMTPAUTH="!+cram" in order to be able
to submit mail (just like You helped me solve same thing in the Centos
7 version)
the second issue is
for Centos 8
Using Your instructions from 'Migrate to Centos 7/QMT host' I got all
production data needed.
I ran into 2 issues :
first issue was /var/qmail/supervise/smtps/run that needs to include
the export FORCETLS=0 and export SMTPAUTH="!+cram" in order to be able
to submit mail
out why.
It doesn't seem to be a ClamAV issue: I set 'clam=no' in
'/var/qmail/control/simcontrol' and restarted qmail, but I still get the
rejections.
I added 'SIMSCAN_DEBUG="5"' to the list of env vars in
'/etc/tcprules.d/tcp.smtp', but that doesn't seem to generate any
actionable
Hi,
We are using qmail toaster,
OS - CentOS5
Currently we are facing one issue in toaster, We use courier-imap for the
mails.
Problem is courier-imap links are breaking when connection reach maximum
size, This results on MSoutlook and went to offline mode frequently.
Please check
Hi all,
On the mirrors I noticed clamav-toaster-0.97.4-1.4.0.src.rpm,
This package is not mentioned on the qmailtoaster.com site, current stable
package is clamav-toaster-0.97.3.
Is there any issue with 0.97.4?
I have not noticed any announcements on the list.
I have compiled the package on
As far as I know, the php compatibility is an issue. There is no direct
upgrade path at the moment.
On Sun, Sep 11, 2011 at 1:01 PM, Ankit Gupta g.ank...@gmail.com wrote:
Hi,
I have also downloaded the Centos 6.0 , and can we use the same packages
designed for Centos 5.x version on Cenos
Have you tried on the usual 32 bits? I wish to upgrade my centos 5.6 to
centos 6.
On Tue, Jul 26, 2011 at 8:35 AM, Natalio Gatti nga...@gmail.com wrote:
I have just finished the installation of QT in a Centos 6 x64 box. I just
wanted to my installation notes. It is not intended to be a Howto
hi
I would like to upgrade the simscan from 1.2 to 1.4 along with few enable
option,s what is the best way i need to follow up here
kavitha
my qmailctl stat as follows
qmailctl stat
/service/qmail-send: up (pid 27832) 248 seconds
/service/qmail-send/log: up (pid 1584) 8131897 seconds
/service/qmail-smtpd: up (pid 27835) 248 seconds
/service/qmail-smtpd/log: up (pid 1578) 8131897 seconds
/service/qmail-pop3d: up (pid 27838) 248
okay can anyone give me a suggestion on this
instead of restarting the qmailctl restart
now i am trying to do
#!/bin/sh
/usr/local/bin/svc -t /service/qmail-send
and call this file in crontab
*/1 * * * * /home/kavitha/qmailsend.sh /home/kavitha/tempfile.txt 21
will it create any trouble
Good morning everybody
I have a strange problem in my qmail server. First let me brief about my qmail
setup
i am using debian 3.1 OS and qmail+spamassassin+clamav . So far the server was
doing it pretty good. The problem started after my
vacation holls. my colleague was telling he didnt add
I am getting this error when builing lbrsr2-toaster.
RPM build errors:
File not found by glob:
/var/tmp/libsrs2-toaster-1.0.18-root/usr/lib64/libsrs2.so.*
File not found: /var/tmp/libsrs2-toaster-1.0.18-root/usr/lib64/libsrs2.a
File not found:
Ever since my last upgrade to the latest version to the qmail I've been
noticing a lot more latency with smtp connections. Sometimes taking up to 3
minutes to make an SMTP connection. I finally narrowed it down to the recent
addition of dnsbl.antispam.or.id to the blacklists file. This RBL server
] wrote:
in qmailadmin you got the option to put a .qmail file in the home of the
user containing something like |preline mailfilter -Acontent filter..
-f /etc/mail/mailfilter
in some version of qmailadmin this option is missing.
Where in qmailadmin should this option be located? I have never seen
and
then stop and start qmail? Is that it? When I test it with spamassassin -D
-lint I don't see the file listed that I just added anywhere.
Thanks in advance
Dan
[6131] dbg: config: read file /root/.spamassassin/user_prefs
It appears to be loading the .cf files from /var/lib/spamassassin/3.001007
-Original Message-
From: Alexey Loukianov [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 06, 2006 4:01 PM
To: Qmail Toaster
Subject: Re
58 matches
Mail list logo