Re: [qubes-users] Qubes OS 3.2 Installation Issues: anaconda 'text mode' Installation Destination autopart failed LUKS
On Saturday, April 8, 2017 at 4:00:49 PM UTC-7, radekz...@gmail.com wrote: > Can you share the exact solution for that? What boot kernel parameters have > been used? Cheers. I'm not exactly sure what 'boot kernel parameters' are, I only had to set the BIOS setting to 256MB as described and everything worked natively via the normal GUI installer. I don't recall using any special settings beyond that, but it was quite awhile now when I worked on this. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/8e589c07-49fd-437b-ac26-cf95a9708c4e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Qubes OS 3.2 Installation Issues: anaconda 'text mode' Installation Destination autopart failed LUKS
Can you share the exact solution for that? What boot kernel parameters have been used? Cheers. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/39964ef0-96a5-47ab-99f1-6ae7e47185ae%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Qubes OS 3.2 Installation Issues: anaconda 'text mode' Installation Destination autopart failed LUKS
Thanks for the replies everyone. I wanted to provide an update on the original problem in which the GUI would freeze and thus force me to attempt to use Anaconda's text interface. I actually (accidentally) stumbled upon the solution. Apparently, changing the Total Graphics Memory setting (shared video memory amount for the built-in Intel GPU) from 512MB to 256MB totally solves the GUI problems!!! I was easily able to use the standard graphical installer to get Qubes OS up and running just fine. Hopefully some other confused person will find this useful to know. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/31183799-c225-44bc-a279-1e4137ef1922%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Qubes OS 3.2 Installation Issues: anaconda 'text mode' Installation Destination autopart failed LUKS
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On Tue, Nov 22, 2016 at 04:16:40PM -0800, pixelit...@gmail.com wrote: > Device: Lenovo ThinkPad L450 modified with OCZ Trion 150 (480GB) SSD > Installation Setup: USB Drive with prepared ISO, using Basic Graphics mode > under Troubleshooting due to system lockup in GUI mode. > > Primary Problem: When trying to setup partitioning, and selecting either > Standard or LVM, this error occurs: "storage configuration failed: autopart > failed: Encryption requested for LUKS device sda2 but no encryption key > specified for this device. > > Could this have something to do with the fact that the original SSD had OPAL > 2.0 and the replacement SSD does NOT have that feature? Am I unable to use > the OCZ drive as a result, or is this something entirely different. Take a look here: https://github.com/QubesOS/qubes-issues/issues/1161#issuecomment-156713740 In short: text based installer currently requires some additional manual steps. - -- Best Regards, Marek Marczykowski-Górecki Invisible Things Lab A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? -BEGIN PGP SIGNATURE- Version: GnuPG v2 iQEcBAEBCAAGBQJYOiIfAAoJENuP0xzK19cs5+IH+wcLzDyV+ajXvwc4zd7Ia3Bv USELUJ6lfvNgDaRDzwc6TGWkQxAw6CdQmudtiBPADMUjO8/r/5q8dRAeAEUQd0/6 8Qbtj2ddAIkHdGAo4WBm27Eh4ocsNlFY11aYABB4LzXIAN78h5uCbNh5do/jTStO BAylypoGpLysDuG5nNtNA00qd0Py5yg7T3EK71XGj2HAyUmos048EtQDSNgJPPHR BWzpEUOScz4tKOC+68e5EYvj7cQz6NTw8SbCQmRsCZJ929TuqWzeNbRrBcipopyi Iq38acOGGDGiwifjx1sSVC3KQBhI0FIOOUzGGdMYCbz93T6TWLZ0e7B1xJ0owJE= =Qo48 -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/2016112731.GS1145%40mail-itl. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Qubes OS 3.2 Installation Issues: anaconda 'text mode' Installation Destination autopart failed LUKS
Device: Lenovo ThinkPad L450 modified with OCZ Trion 150 (480GB) SSD Installation Setup: USB Drive with prepared ISO, using Basic Graphics mode under Troubleshooting due to system lockup in GUI mode. Primary Problem: When trying to setup partitioning, and selecting either Standard or LVM, this error occurs: "storage configuration failed: autopart failed: Encryption requested for LUKS device sda2 but no encryption key specified for this device. Could this have something to do with the fact that the original SSD had OPAL 2.0 and the replacement SSD does NOT have that feature? Am I unable to use the OCZ drive as a result, or is this something entirely different. Background: I am a first time user of Qubes OS and have only marginal experience with installing any type of Linux disto. I'm mostly a Windows guy, where things like this 'just work' usually. Thanks for the support. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/311e16d5-abda-4fae-a28b-fde34d7b45ef%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
