Re: [Rd] Undocumented change of dirname("C:/") on R-devel on Windows

I confirmed the revert fixed my failing test. Thanks! 2023年2月23日(木) 20:12 Hiroaki Yutani : > Thanks for the prompt response, I'll confirm it after the new R-devel > binary is available. > Also, thanks for the detailed explanation. I agree with you in general. > > > "/" in "C:/" is a path

Re: [Rd] Undocumented change of dirname("C:/") on R-devel on Windows

Thanks for the prompt response, I'll confirm it after the new R-devel binary is available. Also, thanks for the detailed explanation. I agree with you in general. > "/" in "C:/" is a path separator or not, and whether it is trailing or not It seems a Windows' path basically consists of two

Re: [Rd] Undocumented change of dirname("C:/") on R-devel on Windows

On 2/23/23 03:27, Hiroaki Yutani wrote: Hi, I found dirname() behaves differently on R-devel on Windows. Since I'm not sure which behavior is right, let me ask here before filing this to R's Bigzilla. On R 4.2.2., we get > dirname("C:/") [1] "C:/" However, on R-devel (r83888), we

Re: [Rd] dyn.load loads libraries/symbols at high addresses.

On 2/22/23 23:05, Vanessa McHale wrote: Hello all, I am trying to write an interface for BQN and R However, even | dyn.load("/usr/local/lib/libcbqn.so"); .Call("bqn_init")| immediately fails on the BQN side, viz. |Failed to allocate memory for JIT 200

Re: [R-pkg-devel] Package submission rejected as it fails checks on Debian

On 23/02/2023 1:11 p.m., Ben Bolker wrote: Not important (of course) but where does the 5000 kWh per tree number come from? Is that (dry weight) x (50% carbon per dry weight) / (carbon content of CO2 emissions per kWh) ? That's just made up, but it is close to the numbers here for dry

Re: [R-pkg-devel] Package submission rejected as it fails checks on Debian

On 23/02/2023 1:11 p.m., Ben Bolker wrote: Not important (of course) but where does the 5000 kWh per tree number come from? Is that (dry weight) x (50% carbon per dry weight) / (carbon content of CO2 emissions per kWh) ?

Re: [R-pkg-devel] Package submission rejected as it fails checks on Debian

> Spencer Graves > on Tue, 21 Feb 2023 05:25:39 -0600 writes: > On 2/21/23 2:34 AM, Vasileios Nikolaidis wrote: >> Yes, with all this I can think where I may have messed up. So thanks for >> the help, at least it verified it is indeed an issue with the code. As >>

Re: [R-pkg-devel] Package submission rejected as it fails checks on Debian

Hi Martin. I think your calculations are way off. A one-tonne tree contains about 5000 kWh of energy. A typical computer server uses about 200 watts, and can process many jobs simultaneously on different cores, but let's say the whole server is dedicated to the Github action. Then it would

Re: [R-pkg-devel] Package submission rejected as it fails checks on Debian

Not important (of course) but where does the 5000 kWh per tree number come from? Is that (dry weight) x (50% carbon per dry weight) / (carbon content of CO2 emissions per kWh) ? https://www.epa.gov/energy/greenhouse-gas-equivalencies-calculator#results If we say 200 watts x 15 minutes

[Bioc-devel] Openssl is not available in netConnectHttps for importing remote BigWig files

Hi Bioc-devel, recount had been failing in recent months at bioc-release and bioc-devel. I finally had the time to dive into it, and eventually that led to an error on rtracklayer that I reported at https://github.com/lawremi/rtracklayer/issues/83. Michael Lawrence noticed that my R session

Re: [Bioc-devel] Installation of XCMS on R

These types of questions are better asked on the support site so the larger Bioconductor community can help. https://support.bioconductor.org/ Please remember to include the code you are trying to run and full output and sessionInfo so we can better assist you. Cheers Lori Shepherd - Kern

Re: [Bioc-devel] Issue with setting Maintainer in new package submission

Yup, just got the confirmation and you were bang-on Mike - thanks so much for your help! -Andrew On Thu, Feb 23, 2023 at 8:27 AM Kern, Lori wrote: > It looks like this was resolved > > http://bioconductor.org/spb_reports/flowGate_buildreport_20230223082234.html > > Lori Shepherd - Kern > >

Re: [Bioc-devel] Installation of XCMS on R

please pose your question with details of error messages to support.bioconductor.org no telephone contacts should be provided or used On Thu, Feb 23, 2023 at 6:04 PM insaf ben wrote: > Hello, > > I have a problem installing the xcms library on my R studio 4.2. Could you > help me do this plz ?

Re: [Bioc-devel] Issue with setting Maintainer in new package submission

It looks like this was resolved http://bioconductor.org/spb_reports/flowGate_buildreport_20230223082234.html Lori Shepherd - Kern Bioconductor Core Team Roswell Park Comprehensive Cancer Center Department of Biostatistics & Bioinformatics Elm & Carlton Streets Buffalo, New York 14263

[Bioc-devel] Trouble modifying read-only ChipDb SQLite database

Hello all, I�m creating a ChipDb package for a protein-based assay. To generate a template package structure and the SQLite database file, I used `AnnotationForge::makeDBPackage()` with a "HUMANCHIP_DB" schema. I�m now trying to add new tables to the database by modifying the `zzz.R` file,

[Bioc-devel] Installation of XCMS on R

Hello, I have a problem installing the xcms library on my R studio 4.2. Could you help me do this plz ? my phone number is +33(0)769345085 [[alternative HTML version deleted]] ___ Bioc-devel@r-project.org mailing list