Re: [R] help finding a starting point to diagnose inability to install or update packages
I'll put that in my notes. Thanks! Larry Johnson Editor and Publisher Cobb County Courier 404-664-2034 http://cobbcountycourier.com From: Hadley Wickham Sent: Sunday, April 25, 2021 7:14 PM To: Larry Johnson Cc: Duncan Murdoch ; r-help@r-project.org Subject: Re: [R] help finding a starting point to diagnose inability to install or update packages If this happens again in the future, you might try the development version of pak: install.packages("pak", repos = "https://r-lib.github.io/p/pak/dev/;) pak::pak("tidyverse") pak automatically diagnoses a number of common problems that causes install.packages() to fail. Hadley On Sun, Apr 25, 2021 at 4:51 PM Larry Johnson wrote: > > It was pointed out to me by Jeff Newmiller that I should have been hitting > "reply all" so that others could see the thread and make comment, > corrections, or benefit from any solution. > > So, I'm going to summarize the end result. > > Duncan Murdoch walked me through some diagnostic steps, and what ultimately > worked was to run > > remove.packages("broom") > install.packages("broom") > > and then repeat that for each of the four packages that attempts to load > tidyverse indicated had dependency issues (I know that last sentence was > ungrammatical, but you probably get my drift). > > I'd still like to know why updating packages in bulk isn't working for me, > but I can move ahead for now, and I'll figure out how to fix that later. > > So thanks Duncan. > > > Larry Johnson > > Editor and Publisher > > Cobb County Courier > > 404-664-2034 > > http://cobbcountycourier.com > > > From: Duncan Murdoch > Sent: Sunday, April 25, 2021 12:41 PM > To: Larry Johnson ; r-help@r-project.org > > Subject: Re: [R] help finding a starting point to diagnose inability to > install or update packages > > On 25/04/2021 10:52 a.m., Larry Johnson wrote: > > Hi. Short version. tidyverse disappeared from my packages, and won't > > install. The initial failure stated I had an outdated broom package, but > > updates are failing too, not just on broom, but on all packages, and there > > is no meaningful error output on the installation failures. > > > > I typically use RStudio on Fedora 33, but the problem I'm about to describe > > occurs whether I use RStudio or the text version. > > > > To give you overview, here is the output from sessionInfo: > > > > > >> sessionInfo() > > R version 4.0.4 (2021-02-15) > > Platform: x86_64-redhat-linux-gnu (64-bit) > > Running under: Fedora 33 (Workstation Edition) > > > > Matrix products: default > > BLAS/LAPACK: /usr/lib64/libflexiblas.so.3.0 > > > > locale: > > [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C > > [3] LC_TIME=en_US.UTF-8LC_COLLATE=en_US.UTF-8 > > [5] LC_MONETARY=en_US.UTF-8LC_MESSAGES=en_US.UTF-8 > > [7] LC_PAPER=en_US.UTF-8 LC_NAME=C > > [9] LC_ADDRESS=C LC_TELEPHONE=C > > [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C > > > > attached base packages: > > [1] stats graphics grDevices datasets utils methods base > > > > loaded via a namespace (and not attached): > > [1] htmlwidgets_1.5.3 colorspace_2.0-0scales_1.1.1 > > compiler_4.0.4 > > [5] magrittr_2.0.1 R6_2.5.0leaflet_2.0.4.1 > > htmltools_0.5.1.1 > > [9] tools_4.0.4 crosstalk_1.1.1 digest_0.6.27 > > lifecycle_1.0.0 > > [13] munsell_0.5.0 rlang_0.4.10CoprManager_0.3.7.1 > >> > > > > After trying complete reinstalls of R, RStudio, and the CRAN repositories > > here's the last error messages I've gotten in my attempts to install and > > load tidyverse: > > > > > >> install.packages(c("broom", "callr", "cli", "cpp11", "dbplyr", "haven", > >> "highr", "knitr", "pillar", "processx", "RcppArmadillo", "reprex", > >> "tibble", "tinytex", "vctrs", "viridis", "viridisLite", "withr")) > > Install system packages... > >> install.packages("tidyverse") > > Install system packages... > >> library(tidyverse) > > Error: package or namespace load failed for ‘tidyverse’ in loadNamespace(j > > <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]): > > namespace ‘broom’ 0.7.5 is being loaded, but >= 0.7.6 is required > > > > Attempts to install or update broom fail with no output. > > > > I've been searching for similar reports of failure here in these archives, > > on the RStudio forums, and on the internet and have found nothing that's a > > seamless match. If I can't find anything I'll check out filing a bug > > report (I've never done it with R before). > > > > Any help with a starting point in diagnosing this will be appreciated. > > Are you using install_github(), or otherwise installing non-CRAN > versions? If so, stop doing that. First, run update.packages(ask=FALSE) > to make sure you are up to date. Then delete any package that is newer > than the CRAN version, and reinstall it using the basic install.packages().
Re: [R] help finding a starting point to diagnose inability to install or update packages
If this happens again in the future, you might try the development version of pak: install.packages("pak", repos = "https://r-lib.github.io/p/pak/dev/;) pak::pak("tidyverse") pak automatically diagnoses a number of common problems that causes install.packages() to fail. Hadley On Sun, Apr 25, 2021 at 4:51 PM Larry Johnson wrote: > > It was pointed out to me by Jeff Newmiller that I should have been hitting > "reply all" so that others could see the thread and make comment, > corrections, or benefit from any solution. > > So, I'm going to summarize the end result. > > Duncan Murdoch walked me through some diagnostic steps, and what ultimately > worked was to run > > remove.packages("broom") > install.packages("broom") > > and then repeat that for each of the four packages that attempts to load > tidyverse indicated had dependency issues (I know that last sentence was > ungrammatical, but you probably get my drift). > > I'd still like to know why updating packages in bulk isn't working for me, > but I can move ahead for now, and I'll figure out how to fix that later. > > So thanks Duncan. > > > Larry Johnson > > Editor and Publisher > > Cobb County Courier > > 404-664-2034 > > http://cobbcountycourier.com > > > From: Duncan Murdoch > Sent: Sunday, April 25, 2021 12:41 PM > To: Larry Johnson ; r-help@r-project.org > > Subject: Re: [R] help finding a starting point to diagnose inability to > install or update packages > > On 25/04/2021 10:52 a.m., Larry Johnson wrote: > > Hi. Short version. tidyverse disappeared from my packages, and won't > > install. The initial failure stated I had an outdated broom package, but > > updates are failing too, not just on broom, but on all packages, and there > > is no meaningful error output on the installation failures. > > > > I typically use RStudio on Fedora 33, but the problem I'm about to describe > > occurs whether I use RStudio or the text version. > > > > To give you overview, here is the output from sessionInfo: > > > > > >> sessionInfo() > > R version 4.0.4 (2021-02-15) > > Platform: x86_64-redhat-linux-gnu (64-bit) > > Running under: Fedora 33 (Workstation Edition) > > > > Matrix products: default > > BLAS/LAPACK: /usr/lib64/libflexiblas.so.3.0 > > > > locale: > > [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C > > [3] LC_TIME=en_US.UTF-8LC_COLLATE=en_US.UTF-8 > > [5] LC_MONETARY=en_US.UTF-8LC_MESSAGES=en_US.UTF-8 > > [7] LC_PAPER=en_US.UTF-8 LC_NAME=C > > [9] LC_ADDRESS=C LC_TELEPHONE=C > > [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C > > > > attached base packages: > > [1] stats graphics grDevices datasets utils methods base > > > > loaded via a namespace (and not attached): > > [1] htmlwidgets_1.5.3 colorspace_2.0-0scales_1.1.1 > > compiler_4.0.4 > > [5] magrittr_2.0.1 R6_2.5.0leaflet_2.0.4.1 > > htmltools_0.5.1.1 > > [9] tools_4.0.4 crosstalk_1.1.1 digest_0.6.27 > > lifecycle_1.0.0 > > [13] munsell_0.5.0 rlang_0.4.10CoprManager_0.3.7.1 > >> > > > > After trying complete reinstalls of R, RStudio, and the CRAN repositories > > here's the last error messages I've gotten in my attempts to install and > > load tidyverse: > > > > > >> install.packages(c("broom", "callr", "cli", "cpp11", "dbplyr", "haven", > >> "highr", "knitr", "pillar", "processx", "RcppArmadillo", "reprex", > >> "tibble", "tinytex", "vctrs", "viridis", "viridisLite", "withr")) > > Install system packages... > >> install.packages("tidyverse") > > Install system packages... > >> library(tidyverse) > > Error: package or namespace load failed for ‘tidyverse’ in loadNamespace(j > > <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]): > > namespace ‘broom’ 0.7.5 is being loaded, but >= 0.7.6 is required > > > > Attempts to install or update broom fail with no output. > > > > I've been searching for similar reports of failure here in these archives, > > on the RStudio forums, and on the internet and have found nothing that's a > > seamless match. If I can't find anything I'll check out filing a bug > > report (I've never done it with R before). > > > > Any help with a starting point in diagnosing this will be appreciated. > > Are you using install_github(), or otherwise installing non-CRAN > versions? If so, stop doing that. First, run update.packages(ask=FALSE) > to make sure you are up to date. Then delete any package that is newer > than the CRAN version, and reinstall it using the basic install.packages(). > > Here's code to compare versions: > > CRAN <- available.packages() > here <- installed.packages() > for (i in seq_len(nrow(here))) { >if (here[i, "Package"] %in% rownames(CRAN) && >package_version(here[i, "Version"]) > > package_version(CRAN[here[i, "Package"], "Version"])) > cat(here[i, c("Package", "Version")], "\n", sep=" " ) > } > > Duncan Murdoch > >
Re: [R] help finding a starting point to diagnose inability to install or update packages
It was pointed out to me by Jeff Newmiller that I should have been hitting "reply all" so that others could see the thread and make comment, corrections, or benefit from any solution. So, I'm going to summarize the end result. Duncan Murdoch walked me through some diagnostic steps, and what ultimately worked was to run remove.packages("broom") install.packages("broom") and then repeat that for each of the four packages that attempts to load tidyverse indicated had dependency issues (I know that last sentence was ungrammatical, but you probably get my drift). I'd still like to know why updating packages in bulk isn't working for me, but I can move ahead for now, and I'll figure out how to fix that later. So thanks Duncan. Larry Johnson Editor and Publisher Cobb County Courier 404-664-2034 http://cobbcountycourier.com From: Duncan Murdoch Sent: Sunday, April 25, 2021 12:41 PM To: Larry Johnson ; r-help@r-project.org Subject: Re: [R] help finding a starting point to diagnose inability to install or update packages On 25/04/2021 10:52 a.m., Larry Johnson wrote: > Hi. Short version. tidyverse disappeared from my packages, and won't > install. The initial failure stated I had an outdated broom package, but > updates are failing too, not just on broom, but on all packages, and there is > no meaningful error output on the installation failures. > > I typically use RStudio on Fedora 33, but the problem I'm about to describe > occurs whether I use RStudio or the text version. > > To give you overview, here is the output from sessionInfo: > > >> sessionInfo() > R version 4.0.4 (2021-02-15) > Platform: x86_64-redhat-linux-gnu (64-bit) > Running under: Fedora 33 (Workstation Edition) > > Matrix products: default > BLAS/LAPACK: /usr/lib64/libflexiblas.so.3.0 > > locale: > [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C > [3] LC_TIME=en_US.UTF-8LC_COLLATE=en_US.UTF-8 > [5] LC_MONETARY=en_US.UTF-8LC_MESSAGES=en_US.UTF-8 > [7] LC_PAPER=en_US.UTF-8 LC_NAME=C > [9] LC_ADDRESS=C LC_TELEPHONE=C > [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C > > attached base packages: > [1] stats graphics grDevices datasets utils methods base > > loaded via a namespace (and not attached): > [1] htmlwidgets_1.5.3 colorspace_2.0-0scales_1.1.1 > compiler_4.0.4 > [5] magrittr_2.0.1 R6_2.5.0leaflet_2.0.4.1 > htmltools_0.5.1.1 > [9] tools_4.0.4 crosstalk_1.1.1 digest_0.6.27 > lifecycle_1.0.0 > [13] munsell_0.5.0 rlang_0.4.10CoprManager_0.3.7.1 >> > > After trying complete reinstalls of R, RStudio, and the CRAN repositories > here's the last error messages I've gotten in my attempts to install and load > tidyverse: > > >> install.packages(c("broom", "callr", "cli", "cpp11", "dbplyr", "haven", >> "highr", "knitr", "pillar", "processx", "RcppArmadillo", "reprex", "tibble", >> "tinytex", "vctrs", "viridis", "viridisLite", "withr")) > Install system packages... >> install.packages("tidyverse") > Install system packages... >> library(tidyverse) > Error: package or namespace load failed for ‘tidyverse’ in loadNamespace(j <- > i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]): > namespace ‘broom’ 0.7.5 is being loaded, but >= 0.7.6 is required > > Attempts to install or update broom fail with no output. > > I've been searching for similar reports of failure here in these archives, on > the RStudio forums, and on the internet and have found nothing that's a > seamless match. If I can't find anything I'll check out filing a bug report > (I've never done it with R before). > > Any help with a starting point in diagnosing this will be appreciated. Are you using install_github(), or otherwise installing non-CRAN versions? If so, stop doing that. First, run update.packages(ask=FALSE) to make sure you are up to date. Then delete any package that is newer than the CRAN version, and reinstall it using the basic install.packages(). Here's code to compare versions: CRAN <- available.packages() here <- installed.packages() for (i in seq_len(nrow(here))) { if (here[i, "Package"] %in% rownames(CRAN) && package_version(here[i, "Version"]) > package_version(CRAN[here[i, "Package"], "Version"])) cat(here[i, c("Package", "Version")], "\n", sep=" " ) } Duncan Murdoch [[alternative HTML version deleted]] __ R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] help finding a starting point to diagnose inability to install or update packages
These are all contributed packages... don't file a bug report on R. Also, tidyverse is a rediculously sprawling meta-package that seems prone to faulty dependency data. If you have a oroblem getting the right version of broom then focus on solving that. One possibility is that your CRAN mirror is not up-to-date.. try a different one or wait a few days for the updates to prooagate. Sometimes all it takes is to update or re-install the offending package. If you want to push the envelope you can use devtools::install_github or similar to bypass CRAN, but it is possible that that version had a problem identified in the CRAN review that you might have trouble with. Whst is your options("repos") set to? On April 25, 2021 7:52:28 AM PDT, Larry Johnson wrote: >Hi. Short version. tidyverse disappeared from my packages, and won't >install. The initial failure stated I had an outdated broom package, >but updates are failing too, not just on broom, but on all packages, >and there is no meaningful error output on the installation failures. > >I typically use RStudio on Fedora 33, but the problem I'm about to >describe occurs whether I use RStudio or the text version. > >To give you overview, here is the output from sessionInfo: > > >> sessionInfo() >R version 4.0.4 (2021-02-15) >Platform: x86_64-redhat-linux-gnu (64-bit) >Running under: Fedora 33 (Workstation Edition) > >Matrix products: default >BLAS/LAPACK: /usr/lib64/libflexiblas.so.3.0 > >locale: > [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C > [3] LC_TIME=en_US.UTF-8LC_COLLATE=en_US.UTF-8 > [5] LC_MONETARY=en_US.UTF-8LC_MESSAGES=en_US.UTF-8 > [7] LC_PAPER=en_US.UTF-8 LC_NAME=C > [9] LC_ADDRESS=C LC_TELEPHONE=C >[11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C > >attached base packages: >[1] stats graphics grDevices datasets utils methods base > >loaded via a namespace (and not attached): >[1] htmlwidgets_1.5.3 colorspace_2.0-0scales_1.1.1 >compiler_4.0.4 >[5] magrittr_2.0.1 R6_2.5.0leaflet_2.0.4.1 >htmltools_0.5.1.1 >[9] tools_4.0.4 crosstalk_1.1.1 digest_0.6.27 >lifecycle_1.0.0 >[13] munsell_0.5.0 rlang_0.4.10CoprManager_0.3.7.1 >> > >After trying complete reinstalls of R, RStudio, and the CRAN >repositories here's the last error messages I've gotten in my attempts >to install and load tidyverse: > > >> install.packages(c("broom", "callr", "cli", "cpp11", "dbplyr", >"haven", "highr", "knitr", "pillar", "processx", "RcppArmadillo", >"reprex", "tibble", "tinytex", "vctrs", "viridis", "viridisLite", >"withr")) >Install system packages... >> install.packages("tidyverse") >Install system packages... >> library(tidyverse) >Error: package or namespace load failed for ‘tidyverse’ in >loadNamespace(j <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = >vI[[j]]): > namespace ‘broom’ 0.7.5 is being loaded, but >= 0.7.6 is required > >Attempts to install or update broom fail with no output. > >I've been searching for similar reports of failure here in these >archives, on the RStudio forums, and on the internet and have found >nothing that's a seamless match. If I can't find anything I'll check >out filing a bug report (I've never done it with R before). > >Any help with a starting point in diagnosing this will be appreciated. > >Thanks, > > >Larry Johnson > >Editor and Publisher > >Cobb County Courier > >404-664-2034 > >http://cobbcountycourier.com > > [[alternative HTML version deleted]] > >__ >R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see >https://stat.ethz.ch/mailman/listinfo/r-help >PLEASE do read the posting guide >http://www.R-project.org/posting-guide.html >and provide commented, minimal, self-contained, reproducible code. -- Sent from my phone. Please excuse my brevity. __ R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] help finding a starting point to diagnose inability to install or update packages
On 25/04/2021 10:52 a.m., Larry Johnson wrote: Hi. Short version. tidyverse disappeared from my packages, and won't install. The initial failure stated I had an outdated broom package, but updates are failing too, not just on broom, but on all packages, and there is no meaningful error output on the installation failures. I typically use RStudio on Fedora 33, but the problem I'm about to describe occurs whether I use RStudio or the text version. To give you overview, here is the output from sessionInfo: sessionInfo() R version 4.0.4 (2021-02-15) Platform: x86_64-redhat-linux-gnu (64-bit) Running under: Fedora 33 (Workstation Edition) Matrix products: default BLAS/LAPACK: /usr/lib64/libflexiblas.so.3.0 locale: [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C [3] LC_TIME=en_US.UTF-8LC_COLLATE=en_US.UTF-8 [5] LC_MONETARY=en_US.UTF-8LC_MESSAGES=en_US.UTF-8 [7] LC_PAPER=en_US.UTF-8 LC_NAME=C [9] LC_ADDRESS=C LC_TELEPHONE=C [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C attached base packages: [1] stats graphics grDevices datasets utils methods base loaded via a namespace (and not attached): [1] htmlwidgets_1.5.3 colorspace_2.0-0scales_1.1.1compiler_4.0.4 [5] magrittr_2.0.1 R6_2.5.0leaflet_2.0.4.1 htmltools_0.5.1.1 [9] tools_4.0.4 crosstalk_1.1.1 digest_0.6.27 lifecycle_1.0.0 [13] munsell_0.5.0 rlang_0.4.10CoprManager_0.3.7.1 After trying complete reinstalls of R, RStudio, and the CRAN repositories here's the last error messages I've gotten in my attempts to install and load tidyverse: install.packages(c("broom", "callr", "cli", "cpp11", "dbplyr", "haven", "highr", "knitr", "pillar", "processx", "RcppArmadillo", "reprex", "tibble", "tinytex", "vctrs", "viridis", "viridisLite", "withr")) Install system packages... install.packages("tidyverse") Install system packages... library(tidyverse) Error: package or namespace load failed for ‘tidyverse’ in loadNamespace(j <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]): namespace ‘broom’ 0.7.5 is being loaded, but >= 0.7.6 is required Attempts to install or update broom fail with no output. I've been searching for similar reports of failure here in these archives, on the RStudio forums, and on the internet and have found nothing that's a seamless match. If I can't find anything I'll check out filing a bug report (I've never done it with R before). Any help with a starting point in diagnosing this will be appreciated. Are you using install_github(), or otherwise installing non-CRAN versions? If so, stop doing that. First, run update.packages(ask=FALSE) to make sure you are up to date. Then delete any package that is newer than the CRAN version, and reinstall it using the basic install.packages(). Here's code to compare versions: CRAN <- available.packages() here <- installed.packages() for (i in seq_len(nrow(here))) { if (here[i, "Package"] %in% rownames(CRAN) && package_version(here[i, "Version"]) > package_version(CRAN[here[i, "Package"], "Version"])) cat(here[i, c("Package", "Version")], "\n", sep=" " ) } Duncan Murdoch __ R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
[R] help finding a starting point to diagnose inability to install or update packages
Hi. Short version. tidyverse disappeared from my packages, and won't install. The initial failure stated I had an outdated broom package, but updates are failing too, not just on broom, but on all packages, and there is no meaningful error output on the installation failures. I typically use RStudio on Fedora 33, but the problem I'm about to describe occurs whether I use RStudio or the text version. To give you overview, here is the output from sessionInfo: > sessionInfo() R version 4.0.4 (2021-02-15) Platform: x86_64-redhat-linux-gnu (64-bit) Running under: Fedora 33 (Workstation Edition) Matrix products: default BLAS/LAPACK: /usr/lib64/libflexiblas.so.3.0 locale: [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C [3] LC_TIME=en_US.UTF-8LC_COLLATE=en_US.UTF-8 [5] LC_MONETARY=en_US.UTF-8LC_MESSAGES=en_US.UTF-8 [7] LC_PAPER=en_US.UTF-8 LC_NAME=C [9] LC_ADDRESS=C LC_TELEPHONE=C [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C attached base packages: [1] stats graphics grDevices datasets utils methods base loaded via a namespace (and not attached): [1] htmlwidgets_1.5.3 colorspace_2.0-0scales_1.1.1compiler_4.0.4 [5] magrittr_2.0.1 R6_2.5.0leaflet_2.0.4.1 htmltools_0.5.1.1 [9] tools_4.0.4 crosstalk_1.1.1 digest_0.6.27 lifecycle_1.0.0 [13] munsell_0.5.0 rlang_0.4.10CoprManager_0.3.7.1 > After trying complete reinstalls of R, RStudio, and the CRAN repositories here's the last error messages I've gotten in my attempts to install and load tidyverse: > install.packages(c("broom", "callr", "cli", "cpp11", "dbplyr", "haven", > "highr", "knitr", "pillar", "processx", "RcppArmadillo", "reprex", "tibble", > "tinytex", "vctrs", "viridis", "viridisLite", "withr")) Install system packages... > install.packages("tidyverse") Install system packages... > library(tidyverse) Error: package or namespace load failed for ‘tidyverse’ in loadNamespace(j <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]): namespace ‘broom’ 0.7.5 is being loaded, but >= 0.7.6 is required Attempts to install or update broom fail with no output. I've been searching for similar reports of failure here in these archives, on the RStudio forums, and on the internet and have found nothing that's a seamless match. If I can't find anything I'll check out filing a bug report (I've never done it with R before). Any help with a starting point in diagnosing this will be appreciated. Thanks, Larry Johnson Editor and Publisher Cobb County Courier 404-664-2034 http://cobbcountycourier.com [[alternative HTML version deleted]] __ R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.