SlimChances wrote:
This is anecdotal evidence of a cause for intermittent connections with
LMS that should not occur
(https://discussions.apple.com/thread/1328901?start=0tstart=0) but
moving my DECT 6 phone seemed to improve my connection problems with my
Radio. I was told on another
This is anecdotal evidence of a cause that should not occur
(https://discussions.apple.com/thread/1328901?start=0tstart=0) but
moving my DECT 6 sattellite phone seemed to improve my connection
problems with my Radio. I was told on another thread that I started,
that my connection issues were
For me too, the only channel working is 6. And I haven't had a single
drop since I changed to channel 6. It's now more than a month, and
before changing I had about one drop a day.
ButC's Profile:
johtem wrote:
Last week i received a new wifimodem from my provider and after that i
had lots of troubles with the wificonnection at my Radio's. Unable to
connect, no reconnection after reset or startup, lost of connections
overnight etc. But no problems with my Touch.
I changed the
Last week i received a new wifimodem from my provider and after that i
had lots of troubles with the wificonnection at my Radio's. Unable to
connect, no reconnection after reset or startup, lost of connections
overnight etc. But no problems with my Touch.
I changed the channel from 1 to 13 to
johtem wrote:
Last week i received a new wifimodem from my provider and after that i
had lots of troubles with the wificonnection at my Radio's. Unable to
connect, no reconnection after reset or startup, lost of connections
overnight etc. But no problems with my Touch.
I changed the
Hi,
My Radio started to have the problems descibed in this thread a few days
ago. No issues with other wifi devices, including a SB2.
I tried factory reset of the Radio and forcing the router to channel 1,
6 and 11 - no difference.
I haven't changed any of my router config for a while, but I
Hi,
My Radio started to have the problems descibed in this thread a few days
ago. No issues with other wifi devices, including a SB2.
I tried factory reset of the Radio and forcing the router to channel 1,
6 and 11 - no difference.
I haven't changed any of my router config for a while, but I
I've always had the problems of the radio's wifi symbol randomly turning
red. This used to happen once or sometimes twice a day and this has been
going on for months and there was no change when I had the router
assigning channel automatically or when fixing it on channel 1. But,
after reading
I assume you have rebooted the router?
jwagner010's Profile: http://forums.slimdevices.com/member.php?userid=29405
View this thread: http://forums.slimdevices.com/showthread.php?t=92597
Well, I'm a little relieved to find this thread as it confirms that I'm
not going crazy. My Radio was working perfectly for over a year
connected to my 802.11n WPA2 network, and for some reason about two
weeks ago it stopped being able to connect. Nothing changed on my
network, the signal is
Try running the WiFi in G only?
toby10's Profile: http://forums.slimdevices.com/member.php?userid=12553
View this thread: http://forums.slimdevices.com/showthread.php?t=92597
toby10 wrote:
Try running the WiFi in G only?
Not sure if that's in response to me, but for what it's worth I tried
that and was only able to connect reliably using 802.11b. Really odd.
neilio's Profile:
buffettck wrote:
Let us know if it works. It's in the menu under advanced settings.
Well...did it work?
nope, still losing connection after a factory reset
dave77's Profile:
Mnyb wrote:
It may actually be broken hardware why not exchange it on warranty ?
Agree...might be the hardware, i have a radio on wifi that works
perfectly, in use many hours every day. edit: why would there be a faq
or update or instructions? I think the Radio works. They wouldn't have a
FAQ
I have several Radios and Touch's all working fine with WiFi and Netgear
WNDR4500 wireless router,,, until I added a Netgear WN2500RP wireless
extender.
For the first time on one Radio I set up the wireless using the WPS
button function. It was a bit hit and miss but finally it worked but I
buffettck wrote:
Let us know if it works. It's in the menu under advanced settings.
Well...did it work?
I don't know about him, but it did work for me ... for about 3 hours.
Now the little bastard is back to showing the red antenna icon, and
refuses to connect. Even after the full reset
nashtr wrote:
I don't know about him, but it did work for me ... for about 3 hours.
Now the little bastard is back to showing the red antenna icon, and
refuses to connect. Even after the full reset it took 3 tries with the
same password to connect. I have officially had it. I've tried every
Was there ever a solution to this? My Radio constantly loses connection,
turning it on/off it reconnects straight away, my Boom/Controller/Touch
never have this problem
dave77's Profile:
dave77 wrote:
Was there ever a solution to this? My Radio constantly loses connection,
turning it on/off it reconnects straight away, my Boom/Controller/Touch
never have this problem
With some of the problems I've heard about the SB and connectivity, or
lack thereof...consider yourself
dave77 wrote:
Was there ever a solution to this? My Radio constantly loses connection,
turning it on/off it reconnects straight away, my Boom/Controller/Touch
never have this problem
not sure, but I can report that one of my RADIOS (the only one I use
with WIFI), can play FLAC files for
garym wrote:
not sure, but I can report that one of my RADIOS (the only one I use
with WIFI), can play FLAC files for hours at a time with no rebuffering.
It has only about a 70% strength connection but there are no other
networks on the same channel (or close channel). Perhaps you have
dave77 wrote:
Yeah, insidder is showing no networks interfering. When connected my
Radio is showing 88%, ironically 10% more than Boom/Touch and further
away from my router
Have you tried doing a full factory reset?
buffettck wrote:
Have you tried doing a full factory reset? Are you running the latest
firmware? I know I had to fully re-set mine after a firmware update
because it wouldn't connect at all. Been fine ever since...
not tried that, i'll give it a go
dave77 wrote:
not tried that, i'll give it a go
Let us know if it works. It's in the menu under advanced settings.
buffettck's Profile: http://forums.slimdevices.com/member.php?userid=50355
View this thread:
pawal wrote:
I have been using the Radio for well over a year now, being quite
stable. But during the last couple of weeks my wifi connection on it has
been acting up really weird, as most in this thread has seen. No changes
in the network setup at all caused these problems. I changed it to
pawal wrote:
I have been using the Radio for well over a year now, being quite
stable. But during the last couple of weeks my wifi connection on it has
been acting up really weird, as most in this thread has seen. No changes
in the network setup at all caused these problems. I changed it to
Any comment or solution from Logitech on this? Seems to me that the
Radio cannot gracefully reconnect to the WiFi network once it loses it's
connection, particularly if people are using WPA2. Clearly people are
able to connect to the WiFi network initially (for the most part) but if
the WiFi
jwagner010 wrote:
Any comment or solution from Logitech on this? Seems to me that the
Radio cannot gracefully reconnect to the WiFi network once it loses it's
connection, particularly if people are using WPA2. Clearly people are
able to connect to the WiFi network initially (for the most
toby10 wrote:
The problem is not universal to all users so this makes tracking down
fixing the issue much more complex. I use WPA2+AES and my Radio (plus
all my other SB players) reconnect just fine without me having to touch
the players.
Couple of ideas.
- are you waiting long
toby10 wrote:
The problem is not universal to all users so this makes tracking down
fixing the issue much more complex. I use WPA2+AES and my Radio (plus
all my other SB players) reconnect just fine without me having to touch
the players.
Same here. I use WPA2 and my SBR always
buffettck;689806 Wrote:
Interesting. A cheapo quartz digital watch is much, much more accurate
than that. So, this thing really can't even keep accurate time on it's
own? How stupid.
Many would agree. ;)
I, personally, have zero interest in having yet another clock in my
midst via
toby10;689852 Wrote:
Many would agree. ;)
I, personally, have zero interest in having yet another clock in my
midst via music streaming devices. I have more unwanted clocks in my
home then I care to even think about. My kitchen alone has FOUR clocks
built into appliances. Silly and
michael123;689659 Wrote:
Yes, I understood, but I do not see any symbol when the Radio displays
the clock. I need to press on 'Power' to turn it on and check..
I see the big digits of the current time with a small icon of alarm,
and below I see the current date. c'est tout
Maybe use
Mnyb;689662 Wrote:
such as the bug when the clock is not in exact sync with the server or
mysb.com will of course trigger the backup alarm
So, the alarm would immediately go off if/when someone's network lost
link? I've never noticed the time being off on my SBR.
--
buffettck
toby10;689804 Wrote:
It would be if you disconnected it from the server for a while. It
needs the server (LMS or MySB.com) to obtain and check it's time.
The Touch player was documented to be as much as 5 minutes off after
seven days in standalone mode using it's own internal server (no LMS
Mnyb;689485 Wrote:
The little wifi icon is red when not conected it is usually white, and
then there is conection to server or mysqueezebox.com
WiFi icon is only present when the Radio is turned on.
E.g. when it is in its normal state - showing date/time - I do not see
anything
--
michael123;689470 Wrote:
My radio was working quite smooth for about 3 months, yet, when the
alarm did not wake me up I noticed that the network has issues.
I haven't used the alarm clock feature on mine since I'm retired, but
now I'm curious... Are there built-in sounds you can use that
buffettck;689601 Wrote:
I haven't used the alarm clock feature on mine since I'm retired, but
now I'm curious... Are there built-in sounds you can use that don't
rely on a network connection? Can you use a built-in sound as an
automatic backup to a radio station (or whatever) if the
buffettck;689601 Wrote:
I haven't used the alarm clock feature on mine since I'm retired, but
now I'm curious... Are there built-in sounds you can use that don't
rely on a network connection? Can you use a built-in sound as an
automatic backup to a radio station (or whatever) if the
For some reason my radio was more stable on WPA than WPA2, but other
have zero issues on any system. I agree this has been my biggest issue
with Slim devices and I have had 2 SB3, still have a boom working and
have replaced the SB3 with a touch. I only got the issue with the last
update but at
My radio was working quite smooth for about 3 months, yet, when the
alarm did not wake me up I noticed that the network has issues.
Why the hell there is no indication on the panel that there is a
network issue??? some icon logitech??
No network configuration changes, I have HTC Flyer, Nexus S,
Dunno, slow response and eventual disconnect from network is often a
duplicate IP issue. Guess not in your case.
Sure no other security features are enabled? Limit on number of
devices allowed? MAC filtering? Etc..
Your SSID is a unique name? WiFi devices are not connecting to your
neighbors
Hi Toby - Yes, I double checked to ensure it wasn't a duplicate IP
problem. In fact, I even hardcoded a known unique IP on the radio and
ran into the same problem. There's no security on the network aside
from the encryption on the wireless. Everything else on the network
connects just fine. The
Make sure there are no duplicate IP's on your network.
--
toby10
toby10's Profile: http://forums.slimdevices.com/member.php?userid=12553
View this thread: http://forums.slimdevices.com/showthread.php?t=92597
Toby - IP address assignment is handled by DHCP. The DHCP server does
not show another device with the same IP address, and when the radio is
off I cannot ping that IP address (telling me that nothing else on the
network is using that IP, either). The slowdown of the radio tells me
it's a problem
I have two squeezebox radios and a duet with controller. In my setup I
have the duet receiver and one of the radios connected via ethernet and
everything works as expected. I have the duet controller connected via
wifi, and that works as expected. However, I cannot get either radio to
stay
I've only ever run WPA2+AES, never had a problem.
FYI: The Radio (and all SB players) do remember the passphrase for
each encryption type so it is relatively easy to switch between types
of encryption.
--
toby10
Running wpa2 and no problems since following the reset procedure above.
--
jwagner010
jwagner010's Profile: http://forums.slimdevices.com/member.php?userid=29405
View this thread:
More questions than answers it seems! No matter, good to share, keep the
reports coming!
Mine has been rock steady since setting up a home hub 2 as a standalone
WAP!
--
wonder boy
2 Booms, 1 radio, a touch and an SB3...think that's enough?
Just anoher data piont, mine has never been unstable and as do follow
the bete development, I have had all fw there is loaded on my Radio
including all betas and none have caused any instability for me.
--
Mnyb
Main hifi:
This is the first issue I have had with the radio and it is was driving
me crazy.
I am just trying to understand why, my question was more to people that
have had this issue with the wifi.
When you say channels 1-11 or 1-6-11 do you mean only those channels?
Or any between?
Sorry I missed the
vdeknock;685365 Wrote:
When you say channels 1-11 or 1-6-11 do you mean only those channels? Or
any between?
1, 6, 11 ONLY. (if possible) as those are the only channels that don't
overlap with other channels.
--
garym
*Location 1:* VB Appliance 6TB (1.10) LMS 7.7.1 Transporter, Touch,
Running WPA network rather than WPA2, the unit has not had any issues
now for nearly 2 weeks. I had the initial red wireless signal and slow
menus twice as reported but for the last week it has been the old unit
is always was.
Anyone else want to try this fix to see if it helps or has adding a
Any one trying to use channel 13 or 14 I would not recomend that, there
is a bug stick to 1-11 or rather 1-6-11.
radio has an automatic wifi region detection that does not really work
so use those channels that is avaible everywhere.
Also if your router is automatically changing channels turn
Ok, so I reset the Radio using the menu option and reconfigured the
network settings including encryption key, etc. The unit continued to
have problems. I then reset it by unplugging it, turning it off and
then powering it on why holding down the + button. Not sure if that
reset technique does
vdeknock;682903 Wrote:
Apart from firmware updates to the radio I was trying to think what else
I have changed and remembered that I upgraded my wireless G network to
WPA2 about 1 month ago when I had a rather large unexpected download on
my network. Last night I went back to WPA encryption
Yes, I would guess though that the BT home hub is one of the most, if
not the most common router in the UK so this could be coincidence and
nothing more.
The most annoying thing for me was that my radio was the only device
affected, my sb3, booms and touch were all fine.
72 hours connected and
Just to add to the mix, I have the same with one of my Radios. Two
Booms, 1 Touch, and 1 SB3 all run without issue. The radio
consistently DROPS connections to any router I try. It will work for a
while, then just stop without explanation and in the latest bout -
refuses to work. I've tried
twynne;683485 Wrote:
Just to add to the mix, I have the same with one of my Radios. Two
Booms, 1 Touch, and 1 SB3 all run without issue. The radio
consistently DROPS connections to any router I try. It will work for a
while, then just stop without explanation and in the latest bout -
Good Evening,
i got the Squeezebox Radio on X-Mas (about an half Month ago).
Today I surfed through it's preferences and tested the Fixed Volume
setting.
The Squeezebox connected to mysqueezebox.com and got verry loud.
Now I'm not anymore able to Adjust the SqueezeboxVolume.
I allready tried to
kidstypike;683499 Wrote:
I'll bring a net!
A few months ago. I was having huge problems with my Radio and a BTHH3.
So I wired the Radio using Homeplugs, which was fine for a few days. My
brother borrowed the Homeplugs to try. I reconnected the Radio via
wireless, and I've not had the
twynne;683508 Wrote:
I'd contain your excitement if I were you. I've been down this road
*many* times... getting the thing working once again for a short while,
only to find it eventually fails. I've once again managed to get mine
working (this time) by installing a second router as an
Thank you for this fast response!
For some reason i haven't had a checkbox to toggle the Fixed Volume
setting.
I completely removed LMS from my system now and set it up again.
Well I didn't get / enable an checkbox (or similar) Fixed Volume
option.
But the SB is working well again.
I 'll
bugmenot;683514 Wrote:
Thank you for this fast response!
For some reason i haven't had a checkbox to toggle the Fixed Volume
setting.
I completely removed LMS from my system now and set it up again.
Well I didn't get / enable an checkbox (or similar) Fixed Volume
option.
But the SB
bugmenot;683501 Wrote:
...
Today I surfed through it's preferences and tested the Fixed Volume
setting.
Yeah, you don't want to mess with that feature on the Radio. It is
meant for players with audio outs to a stereo or self powered speakers.
;)
You will have to go into the Radio
kidstypike;683513 Wrote:
Settings Advanced Networking Switch to mysqueezebox.com. If you
have an IR remote you can press and hold the + button and add this item
to your home menu. I would've thought you could do the same with the +
button on the Radio itself, but I can't on mine!
I've
twynne;683508 Wrote:
..
As an aside, I can't find the options to switch the Radio between local
and squeezenetwork anywhere in the menu anymore. Have they been
fiddling the menus in latest firmware?
The Switch to MySB.com menu item only appears when your player is on
LMS, if on MySB it
twynne;683517 Wrote:
I swear this did not appear in that menu earlier!
Thanks though - found it now. Incidentally just hitting plus (not
holding) allowed me to add it to top menu.
Yes, you're quite correct, just a short press, not press and hold.
--
kidstypike
kidstypike
1xSB3 -
toby10;683520 Wrote:
The Switch to MySB.com menu item only appears when your player is on
LMS, if on MySB it will not be present as a selection (because you are
already on MySB).
That's great if you knew that in advance, but if you don't it's *very*
confusing! Didn't help that the server
twynne;683508 Wrote:
To add to the frustration trying to diagnose this most recent problem,
the Radio (after connecting to the wifi) refused connection to the LMS.
The Boom sitting right beside me at the time was connected and playing
fine.
I hopped onto the server to find that LMS pref
Wonder Boy,
Are you still having this problem now that you are using an old home
hub 2 router as a wireless access point?
I confirmed that both my Radios have the same configuration last night
and this morning the problem radio was showing the red wireless icon
and the symptoms outlined above
jwagner010;683240 Wrote:
Wonder Boy,
Are you still having this problem now that you are using an old home
hub 2 router as a wireless access point?
I confirmed that both my Radios have the same configuration last night
and this morning the problem radio was showing the red wireless icon
I think there are other reports of radio-homehub issues - not other wifi
devices. At any one moment I have about 4 or 5 other devices on wifi -
no issues.
--
castalla
1 Touch - Muse M50 EX TPA3123 T-Amp Mini - Acoustics Q10 speakers - 2
duff ears - purfek!
1 Logitech Radio + remote - purfek!
I use WPA2-AES, no problems.
--
toby10
toby10's Profile: http://forums.slimdevices.com/member.php?userid=12553
View this thread: http://forums.slimdevices.com/showthread.php?t=92597
I have two Radios in the same bedroom, one on each side of the bed.
Both on Wireless connected to my Netgear WNDR4500 Wireless router. One
Radio works flawlessly. The other exhibits the same behaviours reported
in this post with the red wireless icon appearing after a number of
hours of being
jwagner010;682962 Wrote:
I have two Radios in the same bedroom, one on each side of the bed.
Both on Wireless connected to my Netgear WNDR4500 Wireless router. One
Radio works flawlessly. The other exhibits the same behaviours reported
in this post with the red wireless icon appearing
Apart from firmware updates to the radio I was trying to think what else
I have changed and remembered that I upgraded my wireless G network to
WPA2 about 1 month ago when I had a rather large unexpected download on
my network. Last night I went back to WPA encryption to see if this
returns the
So, after almost 2 days of constant connection the radio decides to drop
off for no apparent reason. Changing channel on router gets it back on
only for it to fall off again. Traffic no different in neighbourhood.
If a new router would solve this I would be happy to spend the money,
but not sure
I cant see it well on the pictures (a bit small) but it looks like a
very strange radio signal behaviour. Is there any change you can test
with another router?
--
Pascal Hibon
1 x SB3, 1 x SB Boom, 1 x SB Radio and 1 x SB Touch - all wireless
ReadyNAS NVX running LMS 7.7.1. w iTunes plugin
Yes, better pictures
http://www.flickr.com/photos/73688749@N06/6646221295/
http://www.flickr.com/photos/73688749@N06/6646221543/
Will test again today, may buy an improved router this weekend
--
wonder boy
2 Booms, 1 radio, a touch and an SB3...think that's enough?
I'd turn off the auto-channel feature, pick the best ch and stay there.
This alone may be adding to the problem. I'd at least eliminate it from
the equation.
--
toby10
toby10's Profile:
toby10;682069 Wrote:
I'd turn off the auto-channel feature, pick the best ch and stay there.
This alone may be adding to the problem. I'd at least eliminate it from
the equation.
Yes, and I would set it to channel 1. There is no one else using
channel 1.
Still, the radio signal of the
To solve my own problem I loaded ww-drt onto my 3 Buffalo Access Points,
removed WDS, setup each with the SAME SSID, Security settings and each
on a different channel 1,6 11. Both my radios are now working - 22
tracks without interruption (previously lucky to get 4) other one 30. I
would say
wonder boy;681688 Wrote:
So...after some apparent success things are back to how they were.
Yesterday the radio hung so I re-connected but this time with a static
IP address and all was good.
This afternoon it dropped off again for no obvious reason. It wouldn't
re-connect to LMS (Touch,
I've tested my Radio streaming a 320k station with only a 60% WiFi
signal, streamed 24/7 from MySB.com for days without issue.
That is what is odd about the reported Radio WiFi issue, for some it is
a constant repeatable problem, while others never see the issue.
--
toby10
garym-thanks, radio was static IP for a couple of days, but still
dropped and couldn't re-connect on it's own. Will have a look at
logging this.
bobertuk-interesting comments, HH3 is not bad on the whole, we are in a
bungalow with the hub in the centre of the building, I would guess radio
is
Only just seen this thread so sorry for the late reply.
I had the same problems when using a BT HH3 - wireless connection
dropping almost every day. Needed to reboot the hub to get Radio back
onto network. Tried all sorts of things to 'cure' the problem but in
the end gave up and swapped out the
Thanks for your reply. Radio dropped twice since posting my update for
no obvious reason, would there be a log of this anywhere, nothing in
router log?
Now trying ethernet which I can do easily but so annoying!
Router is next to a phone but has been for more than a year and radio
only recently
So...after some apparent success things are back to how they were.
Yesterday the radio hung so I re-connected but this time with a static
IP address and all was good.
This afternoon it dropped off again for no obvious reason. It wouldn't
re-connect to LMS (Touch, SB3, Booms never faltered) but
bobertuk;681717 Wrote:
Only just seen this thread so sorry for the late reply.
I had the same problems when using a BT HH3 - wireless connection
dropping almost every day. Needed to reboot the hub to get Radio back
onto network. Tried all sorts of things to 'cure' the problem but in
the
My Radio also works flawless. Being the owner of several different
devices (SB3, SB Boom, SB Touch and SB Radio) I can say that the wifi
radio used in the SB Radio is a very good one. It is the device that
sits the furthest away from my Access Point but it has the best signal
strength of all SB
in your SbS/LMS Settings, set the logging level (advanced tab in
settings) to debug for your server log. Then after it has some
dropouts, go in to the Settings information tab, bottom of page and
look at your server log.
--
garym
*Location 1:* VB Appliance 6TB (1.10) LMS 7.7.1
Knobbyclark;681899 Wrote:
I have recently started to experience the same problem (in the last 4-6
weeks or so)- ONLY to my Radio (other SB devices work fine) - very
annoying happens every day after day 30 mins or less of play - just red
icon and then runs very very slow - only method is to
Nope sorry not a BT HH3 - Virginmedia superhub in cablemodem only mode
(none of the other crap) running onto a cluster of Buffalo Aps in a WDS
--
Knobbyclark
Knobbyclark's Profile:
OK
So I followed Pascal's advice and separated static and DHCP range, gave
all wifi devices nice fixed addresses and monitored. Radio dropped out
as did new laptop that was adjacent to the radio monitoring the wifi
traffic coinciding with when the bizarre trace started as shown on this
picture.
UPDATE
So...I reset to factory my router and the radio, reinstalled the latest
radio firmware again and incredibly the radio has behaved impeccably now
for around 60 hours or so. It streams, it turns on/off, it connects to
LMS when my server is turned on and happily sits there when server is
With regard to my no problems report I should note that I do use
static ip addresses for my radios (and everything else I have that
never leaves my network)
--
garym
Location 1: VB Appliance 6TB (1.10) LMS 7.7.1 Transporter, Touch,
Boom, Radio w/Battery (all ethernet except Radio)
Location
A few days ago I had problems connecting my Squeezebox Radio to my
WiFi-lan after a power failure. Sometimes my lan showed up in the list
of available lan's but couldn´t connect, sometimes it couldn´t find my
lan att all. When I adjusted my routers WiFi-channel from 12 to 10
there was no problems
garym;680134 Wrote:
With regard to my no problems report I should note that I do use
static ip addresses for my radios (and everything else I have that
never leaves my network)
Good point. I don't use a true static IP for my Radio, but I do use my
router's static DHCP to reserve the same IP
1 - 100 of 112 matches
Mail list logo
