Andrew
Your experience and engineering explanation backs up what Bruce Gordon
said. He was referring to the hoop disturbing the rotational stresses.
John Hawrylak
Woodstown NJ
On Monday, June 15, 2020 at 12:30:53 AM UTC-4, Andrew Letton wrote:
>
> On the topic of hoopless:
>
> I bought the
Steve
Ohhh, I see, I was thinking of the round struts. You used flat ones.
Yes, they would be thinner than 1/8" plate.
John Hawrylak
Woodstown NJ
On Sunday, June 14, 2020 at 12:04:26 PM UTC-4, Steven Sweedler wrote:
>
> John, here is the lowrider with the struts attached that I used on my
Steve
Can you provide a picture of the strutted mounting??? It seems the struts
would be very short. Or do you mount the strut to the rack like the strut
to Mark's rack with a drawbolt ??
John Hawrylak
Woodstown NJ
On Sunday, June 14, 2020 at 11:18:00 AM UTC-4, Steven Sweedler wrote:
>
>
I’ve adapted the BG lowriders to several different forks, I usually use
pieces of rack struts, my lbs always seems to have far more of these than
they want, and they are very handy for this sort of thing. Steve
On Sun, Jun 14, 2020 at 11:11 AM Bill Schairer wrote:
> John,
>
> The steel used is
John,
The steel used is 1/2 inch by .14 inch because that is what I had on hand.
I suspect a lighter solution would work, aluminum maybe? I believe my
Atlantis is a Waterford bike. No spacers were required for either bike. I
don’t think it matters if braze-ons are above or below. On the
Bill
Looks like a great solution and it would seem to work if the fork brazeons
were below the rack mounting point, e.g., a BG rack on a fork with 165mm
brazeon spacing.
Is the 1st picture the MIT Atlantis?? If so, it clearly shows the
braze-ons mounted higher on the fork than most racks
Dave's problem looks to be solved. I do want to throw in a couple of
things about Tubus racks:
1. The quoted 165 mm fork tip to mid-fork is what Tubus uses. It is a
commonly used dimension but hardly universal. Case in point being Bruce
Gordon racks. The mid fork mount MUST be correctly
I thought the 'standard' mounting point on the fork was 165mm from the fork
dropout. Bruce Gordon used 7" (178mm) for his front rack, and Waterford
used his spacing in the late 90's and early 2000's.
The RBW braze-ons look too high to fit the racks without odd looking
backward tilt. They
Is that lower-rear mount on the fork really for low rider racks? It looks like
a high-mount for fender stays to me.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an
Here is my last experiment the new Tubus Grand Expedition front. While it
can be physically mounted to the low rider braze-on it doesn't really
work. You would really want to mount the rack lower and use a P-clamp
around the fork legs or the Tubus LM-1 clamp on mount. I plan on using this
Nice looking rack, but I think Bruce Gordon said "Hopeless is helpless".
RBW even offers their low rider racks with a bolt on hoop.
John Hawrylak
Woodstown NJ
On Saturday, June 13, 2020 at 9:13:00 AM UTC-4, ed wrote:
>
> Here is their blog on the new S rack.
>
The product page lists the price as $108.77 per side:
https://global.bluelug.com/nitto-s-rack.html
Both sides are in stock. If I bought one I'd buy both sides. I wouldn't
be scared to run an errand with only one side installed. I use a plastic
Salsa Anything Rack for Growler runs, and so
That's a great looking rack, but then there's this quote that made me wince-
"This rack sold individually. So I installed only right side, for my daily bike.
Maximum load capacity is 6kg (around 13 pounds) I could carry 28 Japanese
comics!"
Doesn't make it any less of a rack, I just think it's
Here is their blog on the new S rack.
https://bluelug.com/blog/global/s-rack/
Ed Fausto
On Sat, Jun 13, 2020 at 9:05 PM Dave Johnston wrote:
> There are versions of the MIT Atlantis that have both Mark's rack
> braze-ons and Low rider braze-ons.
> Probably can't go wrong with a Tubus Tara.
> I
There are versions of the MIT Atlantis that have both Mark's rack braze-ons
and Low rider braze-ons.
Probably can't go wrong with a Tubus Tara.
I can double check to see if a Tubus Duo or Grand expedition will work
sometime this weekend. I have a 53cm still in the box.
Pic from Rivendell
Yes, all forks from Riv with the so-called low-rider mount at mid-fork are
designed to work with racks like the Nitto Mark's. Nitto/Riv also did a Hub
Area Rack for it, and lots of people have made traditional low-rider racks fit.
--
You received this message because you are subscribed to the
Ryan:
A friend of mine who's handy with a torch attached them, & also the upper
ones for a small Nitto front rack. Mine is an '03 & the fork had no mounts
when I got it.
doug
On Saturday, June 6, 2020 at 10:22:39 AM UTC-7, Ryan Nute wrote:
>
> Doug, how does it attach to the fork blades? I
Doug, how does it attach to the fork blades? I thought Atlantii didn't
have lowrider mounts.
Ryan
On Thursday, June 4, 2020 at 8:06:22 PM UTC-7, dougP wrote:
>
> I use the Tubus Duo because it installs so easily. I take mine off when
> not using & it's easy to do and the Duo takes up little
Nitto and Blue Lug are developing new lowrider racks.
Their Instagram post says that new racks will be announced soon.
https://www.instagram.com/p/CBDVw4oDCW8/
Takashi
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from
I use the Tubus Duo because it installs so easily. I take mine off when
not using & it's easy to do and the Duo takes up little room. It's easy to
ship the bike with the Duo. This is on a Toyo Atlantis but I don't see any
difference for other Atlantis.
dougP
On Thursday, June 4, 2020 at
20 matches
Mail list logo