Kevin,
I'm glad to hear that what I did to your Hunq seemed to fix the problem.
Let me know if you have any other issues. Did you find a replacement bolt
and nut for the seat cluster. Hopefully you've had a chance to get your
new bike dirty!
Best,
Keith
On Monday, April 27, 2015 at
Thanks All.
I will patiently wait a response and see. Didn't really want to push it to
hard with Riv. But it would be fun to have their product in the shop. If
any one is on the tall side and wants to throw a leg over a Hunqapillar,
stop by the Pro Shop and you can take my rig for a spin.
Tony,
We are indeed right off the CO Canal. The Bicycle Pro Shop is on 34th M
St NW in Georgetown. Stop in sometime when you get a chance. I'll be out
for the next couple weeks cause my wife and I are expecting a little one
here in the next couple days.
--
You received this message
.
They are great bikes that make for fun adventures and memorable stories.
Keith Muller
Store Manager
The Bicycle Pro Shop
Washington, DC
On Tuesday, June 2, 2015 at 10:12:30 AM UTC-4, Alan Pickett wrote:
What to DC-centric folks think about helping develop a local dealer for
Riv Bikes
How tall are you?
I would slide you grips and controls in a half inch at a time. Try it out and
if you like it, get the hacksaw/pipe cutter out and trim it down. Repeat till
you find your happy spot!
I have the Bullmoose bars on my Hunqapillar and love them. My are full width,
but I'm also
Saddle is sold!
On Thursday, July 23, 2015 at 12:21:53 PM UTC-4, Ryan Thompson wrote:
I'll take it if it's still available. Can't figure out how to PM from my
iPhone.
Ryan
--
You received this message because you are subscribed to the Google Groups RBW
Owners Bunch group.
To
Patrick,
What headset are you running? How old is it?
Keith
On Thursday, July 23, 2015 at 12:06:29 PM UTC-4, Deacon Patrick wrote:
On my Quickbeam there is a slowly increasing stiffness in my headset, but
only in the middle (when straight). It isn’t noticeable when moving the
bars back
All items have been sold!
On Thursday, July 23, 2015 at 12:21:53 PM UTC-4, Matt Beecher wrote:
I'll take both. Please send me details.
(I apologize to the grouP, as I cannot figure out how to reply privately
from my phone.)
Matt
Oswego, il
--
You received this message because you
Conway Bennett,
I would do $130 for all items shipped to you.
Keith
On Friday, July 17, 2015 at 10:29:02 AM UTC-4, Conway Bennett wrote:
I'll take the levers please, how much for the whole lot?
Fair winds,
Captain Conway Bennett
--
You received this message because you are subscribed
Stem Bar are Sold. I still have the TRP Brake Levers available for sale!
Thanks,
Keith
--
You received this message because you are subscribed to the Google Groups RBW
Owners Bunch group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
All Items are Sold!
Thanks,
Keith
On Saturday, July 18, 2015 at 3:08:57 PM UTC-4, Conway Bennett wrote:
I'll take the levers for sure.
Fair winds,
Captain Conway Bennett
On Jul 18, 2015, at 2:07 PM, Keith Muller pharm...@gmail.com
javascript: wrote:
Stem Bar are Sold. I still
Front Derailleur is sold
Keith
--
You received this message because you are subscribed to the Google Groups RBW
Owners Bunch group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send
Price Drop!
Crank - $60 Shipped
Rear Derailleur - $50 Shipped
Thanks,
Keith
On Saturday, July 18, 2015 at 8:58:58 PM UTC-4, Keith Muller wrote:
I have a few more items to sell!
Here they are:
Sugino XD2 Cranks, 46-36-26, 175mm. Used w/ some scratches, but overall
good shape. Tons
Saddle is Sold!
Thanks,
Keith
On Sunday, July 19, 2015 at 9:42:56 PM UTC-4, Keith Muller wrote:
Some more stuff I'm looking to sell.
I have a Honey Brown Brooks Champion Flyer Special Saddle. Saddle is in
great shape, just a little scuff(character) on the right side of the
saddle
All Items are sold!
Thanks,
Keith
--
You received this message because you are subscribed to the Google Groups RBW
Owners Bunch group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group,
I'm in search of a 50cm Betty Foy. Looking for a frameset, but wouldn't
pass up a compete bike depending on the build. Shoot me an email with some
photos if you have one, and I will get back to you.
Thanks,
Keith
--
You received this message because you are subscribed to the Google Groups
Hi all,
I'm looking for a rear hub. I need a 32H, 135mm spacing with a 8/9/10
speed freehub body. Looking for an XT level hub, nothing to crazy. Please
let me know if you have anything. DM me if you do.
Thanks,
Keith
--
You received this message because you are subscribed to the Google
I found a hub. Thanks all!
On Tuesday, December 8, 2015 at 7:20:42 PM UTC-5, Keith Muller wrote:
>
> Hi all,
>
> I'm looking for a rear hub. I need a 32H, 135mm spacing with a 8/9/10
> speed freehub body. Looking for an XT level hub, nothing to crazy. Please
> let m
Clamp is a 31.8mm and i will also include a shim for 28.6mm.
Keith
On Wednesday, December 30, 2015 at 10:18:41 PM UTC-7, Keith Muller wrote:
>
> I have a Shimano 105 FD-5703 Triple Front Derailleur I'm looking to sell.
> Used about 500 miles like my other stuff. $20 Shipped. DM me
Bike is Sold
On Sunday, December 6, 2015 at 8:47:29 PM UTC-5, Keith Muller wrote:
>
> I am trying to sell my All-City Space Horse. His name is Stanley the
> Cosmic Donkey! He's a great bike, but I bought a Rivendell Hunqapillar and
> I don't ride him anymore. He has been well take
Brakes & Headset are sold.
Drivetrain & Shifters are still available.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Edwin,
That are 42c panaracer t-serves w/ VO 50mm snake skin fenders. It's tight, but
it fits.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
I think I might be able to swing something. I'll give you a shout when I get
back to DC.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
My wife would kill me if I bought another one of your bikes, but it's so
tempting!
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Jim,
It will take some creative modifications to make it work, but I will make it
happen. I did a similar thing with the front basket & front light on my
hunqapillar.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe
I have a set on my Hunqapillar. They fit just fine. I've been pretty
happy with them.
Keith
On Wednesday, November 25, 2015 at 5:52:10 AM UTC-5, Daniel Jackson wrote:
>
> anybody use these on their hunq? Do they fit between seatstays?
>
> Thanks,
> D.
>
--
You received this message
I have an IRD 11-32T 10 Speed Cassette that I'm looking to sell. I
installed it on my Hunqapillar and realized it didn't work with my current
setup. Cassette was pedaled for about 5 miles and has spent the last 6
months in my parts bin. I'd like $40 for the cassette and that includes
Here is a little tidbit that people miss on their rivs regarding a slipping
seatpost. When they produce the frames, the Seat lug has a tab that
connects the slot in the lug together and keeps it from deforming when the
frame is brazed up. In the finish work before paint, they go through and
Items are sold
Thanks
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to
Price drop! $40 will get it shipped to you now. Please let me know if you
have any interests.
Thanks,
Keith
On Wednesday, May 4, 2016 at 6:05:11 PM UTC-4, Keith Muller wrote:
>
> I have a Edco Competition 1" Headset that I'm looking to sell. It has
> been used as a Display f
Price drop! $70 will get them shipped to you.
Thanks,
Keith
On Monday, May 23, 2016 at 7:56:58 PM UTC-4, Keith Muller wrote:
>
> Hey all!
>
> I have a set of Specialized S-Works Renegade tires I'm looking to sell.
> They are 29 x 1.8 tires. Bought them for my Atlantis, but
Price Drop. $30 will get one shipped to you. $50 will get both of them
shipped to you.
Thanks,
Keith
On Wednesday, May 4, 2016 at 5:58:28 PM UTC-4, Keith Muller wrote:
>
> I have a couple Sachs 8-Speed Freewheels I would like to sell and get
> gone. They are new in the bo
Jack,
Noodle are flat accross the top
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to
Headset is sold.
Thanks
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to
I forgot to note that both of these lights are Silver Anodized.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Like a good friend likes to say. If it's worth doing, then it's worth over
doing. Is it necessary? Never! Is it fun to do? Hells yes! Kind of like my
Hunqapillar equipped with an XTR 11-speed one-by drivetrain. Completely
unnecessary in a sense, but it's lots of fun and it sure looks
I have two Schmidt Edelux II Front Dynamo Lights that I'm looking to sell.
Both are in really great shape. One I took off my Hunqapillar and
replaced it with a B IQ-X. Light was used for about 6 months. Light was
mounted on the Front of my rack, so the lead is long enough to do fork or
Both lights have sold!
Thanks!
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send
Edelux with the 140cm lead has been sold. Still have the Edelux that has the
shorter lead available.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
Campy BB is sold.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to
Brake Levers are sold
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to
XTR 68x113mm BB is sold
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to
Bob,
It is a 62cm. I'll post pics of complete bike next week when it is finished.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
I have 3 bikes with SON28 hubs. That vroom and vibration is caused by the
magnetic polls of the generator and is perfectly normal. Switch the light off
when while you spin the wheel and you will feel a change in the vibration.
Also, make sure your front skewer is plenty tight. If it's
In a sense yes, but once the hub is spinning at a higher speed the drag is
hardly noticeable. Your spin test in a repair stand is far from replicating
real world use and conditions. Electricity is not free, even coming from a
dynamo hub. If you want the convenience of a self sufficient
Ryan,
I am 6'2"ish depending on the time of the day and about 260lbs.
I also have a 62cm Hunqapillar and a 64cm Atlantis. I'm excited to get this
bike finished.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from
You can thank Amazon for the ridiculous expectations that some buyers have now
days!
Keith "who patiently waits for his package to arrive someday" Muller
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and
Peter,
Your last sentence made me think of this:
http://www.lavelocita.cc/opinion-page/data-disconnection
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an
To all the Appaloosa owners/tinkerers out there in Rivland,
How many link have you had to add to a 116 link chain to get an appropriate
chain length for the Appaloosa? My drivetrain is pretty standard, 46/36/26T
crank w/ 11-34T 9 speed cassette.
Thanks in advance,
Keith
--
You received
My bad! 700c/29" is the wheel size
sorry about that!
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
René,
I have been running Mavic A719s for some time. They are double eyeleted, and
are real sturdy though reasonably light for the purpose they serve and I've
never had to true them since I built them. I run my tension at about 130kgf on
the driveside spokes without a tire on the rim, which
Congrats on the coming baby! You might want to contemplate a new top tune on
your Riv. It's looking like you might have a tube that has rusted through.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group
This is a long shot, but I'll give it a try.
I'm looking for an AHH in a 61cm size, single top-tube, with canti brake
mounts. If anyone has anything out there, please let me know.
Thanks,
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners
Most lights will feature an On/Off switch on the light itself. Some offer
an additional sensing mode(I.e. daytime running light & nighttime modes)
The Edelux II is a very nice setup, though it is expensive. I have it on
three of my bikes. If you are looking for a more affordable option, I
I am looking to sell my TA Specialties Carmina Crankset and Phil Wood
Bottom Bracket. The Carmina Crank is currently setup as a double with a
94mm BCD spider. Chainrings are 42T outer and 29T inner TA Specialties
chainrings. Crankarms are 175mm length. Crank and chainrings are all
silver.
Jeff,
Where are you located?
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group,
I am working on building up an 64cm Atlantis I picked up. Looking for the
following parts if anyone has them:
Nitto Dirt Drop Stem, 80mm
Nitto 32F Front Rack
Silver Paul Canti-Brakes(Either Variation, though I would prefer neo for
the front and touring for the rear)
Silver Paul Canti-Levers
That will easily straighten without an issue. Please use a derailleur
alignment gauge and do it correctly. Crescent wrenches are a bad choice for
that job. A steel hanger can bend a good long way and still be straightened.
I wouldn't be one bit nervous about straightening yours.
--
You
I'm looking to buy are pair of Sackville Hub Area Bags. Please let me know
if you have anything via PM.
Thanks,
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send
Daniel,
What bar/stem combo are you going to run with your Hunqapillar? I have a
62 Hunq and run it with a bullmoose bar. I have a 98.5cm PBH, I'm 6'2"ish
and the bike fits me like a glove. If you are a 90cm PBH and are running a
bullmoose bar, a 58 will probably feel great. If you a
You will need a new axle. Your current axle is to short.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
I second the CX70s! They are a great brake! I have Both Paul's brakes and
Shimano CX70s and they are both great brakes. If you are looking for a more
budget oriented brake, the CX70s are the way to go.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Deflate the tire and wet down the bead of the tire with soapy water. I find
dawn dish soap works best. Soapy water helps lubricate the tire bead so it
will seat properly.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To
What size is your Yo Eddy?
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email
Jeff,
I have been building wheels for over 20 years. I work at The Bicycle Pro Shop
in Georgetown. If you have any questions about building wheel, either stop in
the store are give me a call. 202-337-0311.
Best,
Keith
--
You received this message because you are subscribed to the Google
Tony,
So Lucy, my wife and myself took a ride down to the tidal basin this morning
the see the cherry blossoms. My wife had Lucy on her Cheviot and had no
problems seeing over her. Like I said previously, her Cheviot is a 50cm frame.
Me wife is about 5'3" tall and didn't have any
I put a C19 on my wife's Cheviot and she has been pretty pleased with it.
Keith
On Thursday, March 24, 2016 at 3:00:45 PM UTC-4, John Phillips wrote:
>
> I ordered one this week to try out on my Hunqapillar.
>
> Has anyone ridden one of these wider Cambium's yet?
>
> Thanks,
>
> John
>
--
You
Daniel,
They are Velo Orange Flutted 63mm Fenders.
Keith
On Thursday, March 24, 2016 at 9:47:09 PM UTC-4, Daniel Jackson wrote:
>
> Keith that's awesome. What fenders are you running there?
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
Tony,
I also installed a mount on my wife's 50cm Cheviot. She hasn't ridden with the
baby on yet, but I will let you know what her experience is. I'm sure it
depends on the baby. Lucy is about 10 months old and 17 pounds so she's on the
small side.
Keith
--
You received this message
For anyone who wants a little more info on the Saluki.
https://web.archive.org/web/20050609023738/http://rivbike.com/html/bikes_saluki.html
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving
Matty,
With the White Ind BB, you need enough threads exposed on the non-drive side BB
cup to thread on the lock ring and tighten it down. Depending on the variance
of width on your BB shell, you may be able to make this work. If you can't
effectively lock down the lock ring, you will
If it is a new White Ind BB, the will swap you spindles.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To
Bill,
I think I have a few of those at the shop. Can you wait a couple days and I
can check when I get back to work on Saturday and let you know?
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and
:
>
> Nice set up. Looking at the seat post on your Hunq, I assume that the
> diameter is 27.2? Did the seat post diameter change? My Hunq came to me
> (used) with a 26.8 post installed...
>
> On Saturday, April 23, 2016 at 7:46:18 PM UTC-4, Keith Muller wrote:
>>
>> So in
1.95 renegades and 2.1 thunder berts fit in VO zeplin fenders. Those tires
actually measure out the same width mounted on the same rim.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop
Tires are S-works Renegades 1.95, fenders are VO zeppelins. The crank is a TA
Carmina.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
I put a set of 1.8" tires on my Atlantis. It didn't look right at all. I'm a
big fan of fat tires!
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Schwalbe does the Marathon Supreme in 650b sizes. They do them in 42c and 50c
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Pacenti offers rims that are tubeless compatible with rim brake surfaces.
HED also does the Belgium Plus in a rim brake model that has a tubeless
profile as well.
Keith
On Monday, May 9, 2016 at 9:58:28 PM UTC-4, Mike in WA wrote:
>
> My brother is looking to build up a new wheelset with a
BBOB,
They are the Planet Bike Cascadia ALX 29er. I think they are 65mm wide. They
aren't super deep, but they work well with 2.1 Thunder Burts.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and
Hub is sold.
Thanks!
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to
Jay,
The Surly 24-Pack rack won't work on the Hunq. I purchased one and tried it.
To make it work, the rack ends up sitting about 4 inches above the top of the
tire and the load sits way to high. Biggest problem is mid-fork eyelets sit to
high on the Hunq fork.
Keith
--
You received this
Michael,
It is the 32F. It mounted up fine. The mount on the fork crown requires some
creative spacer placement on the backside of the crown.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop
Yeppers, we know a thing or two about Rivs at the Bicycle Pro Shop. If you
stop in the Georgetown store one of my Rivs is usually hanging by the front
door. Right now all three are there when I'm in. People are usually surprised
to see them with all the high zoot carbon dohickies in the
I would chase the BB shell and any of the eyelets that you want to use. Brake
bosses are pretty clean when they arrive. I would also sand the paint off of
the face any eyelets you plan on using. When you tighten a rack stay or
accessorie to the eyelet, I have found that the paint on the face
If it is the shimano BL-M770 lever, then you have yourself a brake lever that
was designed for v-brakes. The lever features "servo-wave" lever action that
provides more cable pull along with increased leverage.
--
You received this message because you are subscribed to the Google Groups "RBW
I am personal friends with Pano, and I will say he is a man of details. This
frame is beautiful. He has some beautiful bikes in his collection, but his
seams eager to get his new bike. After seeing the photo set of this frame, I
now know why! I am jealous of his new pony!
Keith
--
You
George,
By SH he means Saddle Height relative to the BB.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Crank is Sold! Thanks for looking!
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group,
Technomic Stem and Noodle bars have sold
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to
Hey all,
I have a few things I'm looking to clear out of my parts collection. Let
me know if you have any interests in the following:
Nitto M151 Handlebar, 26.0 Clamp, 46cm Width, Short Reach (76mm), Shallow
Drop(128MM), Used for a about a month to see if I liked them. $35 Shipped
Nitto
Rivs are a gateway drug! You start with a Hunqapillar, then you talk yourself
into an Atlantis, then you ride an Appaloosa and take that home. Then you get
the wife a Cheviot. It can be quite the rabbit hole! A fun rabbit hole!
Keith
--
You received this message because you are subscribed
Hey all,
Just moved to Lawrence Kansas from Washington DC. Just curious if there are
any RBW bunchers in the eastern Kansas area. Lawrence is nice and seems like
there is plenty to explore.
Thanks,
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Don't know if it will happen, but I'm looking for a Nitto Albastache bar. If
you have one you want to part with, please DM me.
Thanks,
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop
Do you have any XTR M900 parts you want to sell?
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To
Hey all,
Another long shot here, but we'll give it a try. I am looking for the
older style Sackville Backabike Rear Bags. These are the ones that have
the two eyelets for the strap you use to lash the bag to your rack. The
new ones have leather straps now, and I like how older ones attach
Conway,
With a Shimano BB, that is a non-issue. The NDS cup is there to support the
cartridge BB. It's pretty common to see that. The extra thread is there so
the cup can tighten down on the BB before it bottoms out on the BB shell. As
long as the cup is straight in the BB shell, you are
Thanks for the insight Eric!
Ryan, if you move, give me a shout.
Keith
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
I have an Appaloosa, a Hunqapillar, and an Atlantis. They are all great
bikes! They all ride just a little different. My Appaloosa is setup with
a Albatross bar, Hunqapillar has a Bullmoose bar, and my Atlantis is setup
with drop bars. I like the way they all ride in different respects,
Still available.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to
1 - 100 of 161 matches
Mail list logo
