In an effort to reduce waste and increase reusability, I've been
transitioning the bikes in my stable to aluminum fish bone link housing
I haven't checked in a year or so, but the last few SON hubs I purchased
were all from European mail order sites (SJS/Bike24/Condor/Berthoud/etc)
and were significantly cheaper as a result of favorable exchange rates and
no VAT, despite the shipping cost.
On Monday, November 27, 2023 at
https://whatbars.com/
On Friday, August 25, 2023 at 12:37:56 PM UTC-7 DavidP wrote:
> We have two bikes with Albatross bars, a 65cm Tosco on my Platypus, and
> recently picked up an Ortho bar for another bike. I like the Albatross bars
> on roadish bikes and wider bars like the Orthos and
Bumping this once again… The following parts are still available, thanks:
*Microshift SL-T10 Thumb Shifters - $75 *
-2/3 x 10 speed, Shimano road
-L = friction
-R = index or friction
-https://www.microshift.com/models/sl-t10/
-Pics -
Bumping this up... This is what's still available, thanks:
TRP RRL-SR Levers - $65
-Used but in good condition
- https://trpcycling.com/product/rrl-sr/
Pics -
https://drive.google.com/drive/folders/1ahk0PTeq6rCcutYlsYggNSWUT35rWPJw?usp=share_link
Microshift SL-T10 Thumb Shifters - $75
I've a Rene Herse UD-1 rack listed if anyone searching for an adjustable
and lightweight rack with a 10 kg (22 lb) weight rating is interested.
It’s very nicely built and high quality w/adjustable struts that can fit
the same mounts as a 32f.
Rene Herse specs -
Re-configuring a few current bikes, shifting directions on a few projects,
& starting to purge some of my parts stash.
TRP RRL-SR Levers - $65
-Used but in good condition
- https://trpcycling.com/product/rrl-sr/
Pics -
The 22AWG wire offered by Velo Lumino, currently out of stock, is the best
solution I've found for threading dynamo wiring through tight spaces such
as fork legs:
https://www.velolumino.com/product/premium-22awg-wire/10?cp=true=true=false=false
On Monday, November 21, 2022 at 3:30:12 PM UTC-8
In addition to mounting it properly, I would remove and submerge it in some
silica gel/rice/etc to try and draw out as much moisture as possible.
To my mind, continuing to use it w/internal moisture increases the odds of
a short and/or more significant damage.
On Monday, September 12, 2022 at
Pacenti Brevets would be my choice.
On Wednesday, August 24, 2022 at 5:51:15 PM UTC-7 plumber...@gmail.com
wrote:
> Hello everyone hope you've all enjoyed a casual ride this weekend!
>
> I'm looking for some input on rims. I recently purchased a Bombadil from a
> member on here and am planning
The line of logic, as I understand it, is according to Paul, the
'Neo-Retro' brakes are more powerful, yet pose heel clearance issues when
used in the rear, so are most often relegated to the front where the bulk
of stopping power is needed while their 'Touring' cantis fit better in the
rear.
It's not so hard to strip a black T610 hub to the bare shell, remove the
anodizing w/Easy Off HD oven cleaner, wet sand it with 400>800>1500 grit
paper, polish it with some Simichrome on a buffing wheel, before rebuilding
it with fresh grease.
*The one important tip is to really tighten the
12 matches
Mail list logo
