Re: [RBW] Re: 58 Appaloosa Build (a tale of two bike frames)

2018-07-05 Thread hugh flynn
Noodles. Pretty much the only drop bar I use on any bike. They have quite a long reach compared to others, but for me, that’s a good thing. Now that I’ve paired them with a 9cm stem, all is flat out perfect for me. Hugh “Noodle” Flynn Newburyport, ma On Thu, Jul 5, 2018 at 11:50 AM Mike Godwin

Re: [RBW] Re: 58 Appaloosa Build (a tale of two bike frames)

2018-07-05 Thread Mike Godwin
Hugh what bars have you on the Appaloosa? I am considering dirt drops of some sort. Have marks/dream bars to switch over, or VOs. Mike SLO CA -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop

Re: [RBW] Re: 58 Appaloosa Build (a tale of two bike frames)

2018-06-25 Thread WETH
Thanks! Most helpful! Glad it’s all working out so well. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To

Re: [RBW] Re: 58 Appaloosa Build (a tale of two bike frames)

2018-06-25 Thread hugh flynn
Measured at a point straight up from the B.B. (which is roughly around the point where I stand over the bike) I get something in the 84-5cm range which provides about 2cm before things would start to get tight. Then again, I’m running Compass 38s, which lowers the standover from what I assume

Re: [RBW] Re: 58 Appaloosa Build (a tale of two bike frames)

2018-06-25 Thread WETH
Hugh, How does the standover height work? According to the geometry charts a 58 Joe has a standover height of 87cm. I run a 75.5 seat height but my PBH is 86-87cm. With the sloaping toptube, is the standover height a bit lower if measured right in front of the saddle? Thanks. -- You

Re: [RBW] Re: 58 Appaloosa Build (a tale of two bike frames)

2018-06-19 Thread hugh flynn
That right there is the key here. I've ridden on Riv-sized larger bikes for 20+ years now and I didn't trust my gut when looking through the charts. I'd have been better off if I trusted my gut feel from the outset. On Mon, Jun 18, 2018 at 11:18 PM adam leibow wrote: > hugh, i did the same

[RBW] Re: 58 Appaloosa Build (a tale of two bike frames)

2018-06-18 Thread adam leibow
hugh, i did the same exact thing when choosing my canti sam size. roman has the same-ish pbh as me and rides a 55 sam, so i test rode the 55 demo (and ive ridden his 55 w drops before), but it just felt small. i knew i wanted the 58 fit, & i'm glad i trusted my gut, esp. with sweep back bars.

[RBW] Re: 58 Appaloosa Build (a tale of two bike frames)

2018-06-18 Thread 'Tony McG' via RBW Owners Bunch
Beautiful bikes, Hugh. I was in Walnut Creek a few weeks ago and rode their 55 Appaloosa demo with the new Billie bar. With a PBH of 89 cm, it puts me right on the bubble between the 55 and 58 Appaloosa. While the 55 did fit, the cockpit seemed short, and I would have preferred the shorter

[RBW] Re: 58 Appaloosa Build (a tale of two bike frames)

2018-06-17 Thread Austin B.
Very nice build--that blue is gorgeous! This might be one of the most roadish Joe builds I've seen. I've not seen many run Barlow's or Drop Bars on them. Goes to show the versatility of these frames. Another option: Rather than keep the 55, you could sell the frame and use the proceeds to