I've been using this same set up and it's totally fine.
On Wednesday, January 13, 2021 at 9:08:35 AM UTC-8 Adam Bowen wrote:
> I am currently running a friction 12speed set up with a microshift bar end
> and GX Eagle derailer/cassette. I have been pleased with how well it works
>
> On
Good to hear. I'm currently setting up a bike with your same set-up. I've
been rocking 10 speed friction for a year, so why not try 12 speed?
On Wednesday, January 13, 2021 at 9:08:35 AM UTC-8 Adam Bowen wrote:
> I am currently running a friction 12speed set up with a microshift bar end
> and
This is very good to know. I don't expect that I will want to go beyond 10
-- when I decided to convert from friction 9 to friction 10, I thought I
was being daringly cutting edge -- but it's good to know that there remain
further possibilities, if and when.
On Wed, Jan 13, 2021 at 10:08 AM Adam
I am currently running a friction 12speed set up with a microshift bar end
and GX Eagle derailer/cassette. I have been pleased with how well it works
On Tuesday, January 12, 2021 at 11:28:54 AM UTC-5 Matthew P wrote:
> Thank you Sam for this post. This is currently on my mind.
> My friends
Thank you Sam for this post. This is currently on my mind.
My friends insisted on a clutch derailer, and then, better than insisting,
a friend gave me one (I reciprocated to make it a trade :)
So I've been internally himming and hawing over what shifter to run on my
Shimano 11 speed clutch
I’ve been using 1x11 for a while, in both friction and indexed. I use an
appropriate Microshift lever with a Shimano SLX clutch derailleur, and it
works flawlessly. I started it out as a bar-end, but now have it on a
hydraulic Gevenalle setup.
On Sunday, January 10, 2021 at 1:24:37 AM UTC-5
Adding my tiny clamor to the general hubub (not Hubbuhubbuh): I've done
this for years with 7, 8, 9, and 10 speed cassettes. Currently
I shift a 1X10 (with granny bailout) using Suntour bar cons and a 7 or 8
speed rd (Dura Ace 7401), and it works surprisingly well despite the
shifter and
Yes, of course it will work. I have a friction 9 speed set up on my
Rivendell and, yes, it is a little fussy, but it works incredibly smoothly
and I have a clutch derailleur. I use the Silver1 shifter because it's
longer and therefore slightly more precise IMHO.
On my other bike, I have a
Friction shifting 11 speeds is easier than friction on 9. Shifting isn’t
fussy at all.
I have a silver downtube shifter. The throw of the shifter is maxed out -
it’s parallel to the down tube at each end of the throw, but that’s fine.
Philip
Santa Rosa, CA
On Saturday, January 9, 2021 at
I run a box components 9 speed wide range cassette 1x and have experienced
no issues or any desire to run a larger cassette. I have used microshift
, dura ace and sunrace shifters. I have recently switched to indexed
shifting and am not sure I will be going back to friction any time soon.
10 matches
Mail list logo