Paul Thumbies are bases for shifters. You decide what shifter to put on
there. If you choose to use friction shifters like Rivendell Silvers,
there is no constraint. If you choose to use Shimano Barcons on your Paul
Thumbies, and insist on using the indexed one for the rear, and prefer to
shouldve been more specific.
running shimano bar ends on thumbies, but all in friction mode. can i just
swap thumbies to opposite/inside sides and then switch cables? i guess
what im now asking is, can the intended front shifter pull enough cable to
run the rear derailleur. i assume the
Great. Thanks for the help
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email
Yes, you can do that. The two shifters have the same barrel diameter, and
will both pull the same total amount of cable.
A Right side Shimano barcon shifter, installed on the Left grip in the
inside position on a Paul Thumbie, in friction mode, can be used to actuate
your front derailer. A
