I got a far better price on these ($49.95 ea.) from http://www.texastooltraders.com/Shop/Control/fp/SFV/32723
, they're made by powr-grip, I'm sure they're the same thing mcmaster
is selling.
Ron Young
earthRight - Solareagle.com
On 12-Aug-09, at 1:48 PM, Ron Young wrote:
From: Matt
boB,
Not only does that make sense, it's the best explanation of the effect of power
factor on an off-grid system that I've read.
I would than assume that this means that Drake's refrigerator is actually
consuming more power from his battery system than is just measured in AC watts
at the
Brian Teitelbaum wrote:
boB,
Not only does that make sense, it's the best explanation of the effect of power
factor on an off-grid system that I've read.
I would than assume that this means that Drake's refrigerator is actually consuming more
power from his battery system than is just
Thanks all.
It was my understanding that we should still be running the conductors
of the same circuit through the same raceway, even if it is the DC input
into the inverter since that DC oscillates slightly (nowhere near as
much as AC). I wasn't concerned about eddy currents in the FNMC of
Esteemed Wrenches,
We haven't talked oscilloscopes since 2007. We have a Nantucket Fronius
inverter that is telling us there is an AC frequency problem. It seems
feasible that there is a frequency issue way out there and that we better
check that.
Any reviews on the Velleman handheld (or any
Seems that if it is only frequency you are looking for, a simple Fluke with
min/max capture is all you really need (of course it must measure
frequency).
-Glenn Burt
-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On
In a message dated 8/19/2009 9:11:05 P.M. Pacific Daylight Time,
will...@millersolar.com writes:
The DC feeder may have an AC component imposed on it by the switching in
the inverter. We installed a large Hawker battery bank
Yup, and the point is that pulsating DC will induce eddy
esteemed wrenches (or just steamed if youve been out in the hot lately)
I'm curious why more folks don't use the same flat roof ballasted rack approach
for large ground mounts? Geotech weed barier and off we go... my initial calcs
sat its a cost saver... my instinct says it viable, but my
8 matches
Mail list logo
