Max,
Don't do the tap alone, you would be overdriving the subpanel. You would
need 200A of OCP somewhere between the tap and sub panel loads. Convert
the MOL to a 200A Main Breaker or install a 200A fused disconnect
between the tap and the MLO subpanel.
Mark Frye
Berkeley Solar Electric
Bill
Flir E40, works well and has some good features that make it easy to write
reports with the software. E60 is similar with additional features, but a
little more expensive. IMHO any of the E - series is a pretty good bet.
Bill
Sent from my Verizon Wireless 4G LTE DROID
Bill Loesch
All, I am wondering what the max AC Coupled back feed into an OBGTVX 3648 might
be. I have installed a 4.9 STC array into a SMA TL5k inverter and the customer
presently has an single OB GTVX with a T240 into a Eback up load panel. I would
like to know if there are any limitations in this type
I've successfully operated isolated temporary installations where the
ac-coupled inverter output significantly exceeds the battery-backup inverter
nameplate rating. Obviously there has to be enough firm AC load to absorb at
least the portion of the AC coupled output that exceeds the grid tie
Anybody got one? If so, please contact me off list.
Best,
Chris Daum
Oasis Montana Inc.
406-777-4309
406-777-0830 fax
www.oasismontana.com
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver
Absolutely right, Bill.
We have a couple of these cameras and they are very handy.
These cameras are also good for detecting high currents through fuses
(if you can see the
fuses) and bad connections, etc.
We had a Chinese module laying around (Astronergy 250W) and it was
sunny so I took a
For the iphone, under $400.
http://flir.com/flirone/
b...@midnitesolar.com wrote at 04:30 PM 9/14/2014:
Absolutely right, Bill.
We have a couple of these cameras and they are very handy.
These cameras are also good for detecting high currents through fuses (if
you can see the
fuses) and bad
But no Android FLIR One yet. Arrrgh!
Dan Fink
Buckville Energy
IREC Certified Instructor™ for:
~ PV Installation Professional
~ Small Wind Installer
NABCEP / IREC / ISPQ Accredited Continuing Education Providers™
970.672.4342
On Sun, Sep 14, 2014 at 5:54 PM, Michael Welch
On 9/14/2014 5:01 PM, Dan Fink wrote:
But no Android FLIR One yet. Arrrgh!
Supposedly Flir will be announcing something for the Android next year.
Right now you can get this Android add on but it's expensive... ($999 ?)
http://therm-app.com/
The lenses are made of germanium and they are
9 matches
Mail list logo
