SolarWorld is back in business
Sky is the limit...
The possibilities
We are endless
are endless...
One of the best
Solar Products
Installation and Service Supplier
,
Brand
We the pioneer in the Solar industry are back with the bang!! With over 40
years of experience and expertise
Solar Edge has a Storedge version for Australia that you should look
at. I haven't figured out the best way to procure them though. We have
some work coming up, so I'll let you know what I find, if you Ping me
off list.
Ray Walters
Remote Solar
303 505-8760
On 9/13/19 3:42 PM, jay wrote:
Thanks, John,
Will do.
On Fri, Sep 13, 2019 at 5:59 PM John Blittersdorf <
john.blittersd...@gmail.com> wrote:
> Jibril,
> I have a solarworld 250 poly clear frame that has been used only as a
> display panel at shows and events. Contact me off list or give me a call.
> Can send a photo
Jibril,
I have a solarworld 250 poly clear frame that has been used only as a
display panel at shows and events. Contact me off list or give me a call.
Can send a photo of it to make sure it looks like the ones you have.
John Blittersdorf
200 West Road
N Chittenden, VT 05763
Hi Jerry,
Thanks for your reply, I am in Colorado Springs, CO.The module is silver.
On Fri, Sep 13, 2019 at 5:50 PM Jerry Shafer
wrote:
> James
> Where are you located? I have some SW Modules, is your module silver and
> white
> Jerry
>
> On Fri, Sep 13, 2019, 4:39 PM James "Jibril" Gustafson
James
Where are you located? I have some SW Modules, is your module silver and
white
Jerry
On Fri, Sep 13, 2019, 4:39 PM James "Jibril" Gustafson <
djibrilf...@gmail.com> wrote:
> Sadly, today my crew managed to shatter the glass on a Solarworld module
> that we had removed from a hail damaged,
HI All,
Anyone have any specific recommendations for the following.
150kw 3 phase 230/400 50hz.
battery based ( battery size isn’t clear yet, but high voltage lithium)
PV
Generator charge.
I see that SMA has their 60kW that’s battery based, but I”m sure there are
others out there.
Thx
jay
I'll let you all know once we sort this out.
A series of blade type disconnects could work. I'm not doing the AC
distribution past the inverters, but I need to consult with the electrical
contractor so I'm driving the bus at this point. Some combination of manual
and automated controls should
Howie,
I am sorry to hear about the issues with Insight2 as well as communications
with our technical support department.
We have identified connectivity issues between some gateways and Insight2, in
some cases:
1. The Gateway stops sending data to Insight2 after firmware update
2. If the
Drake,
I attached a screenshot. I have had zero problems but I was a
Beta field tester for Schneider. I use DHCP only. Everything works that I
need for offgrid to config a remote system on Insight2. Ignore the events
as this is a known problems for firmware, 2 months away I am told.
Make
Hi Drake,
In general, you want to use DHCP unless its an unusual network. You would
typically enter this into the network page of the device. This gives the
router control of the IP address and all of the other networking parameters
of the device on the network. Static is more common in a
I have very similar issues. The Gateway connects
and disconnects continually. I have 14,370 events
listed, mostly the Gateway connected and disconnected.
The first few weeks it was running, the Insight 2
(the Gateway web site) scrolled repeatedly
through all the error messages it could throw
Howie,
So CI2 worked until you did a gateway firmware update?
Can
you verify that 1.04 firmware is running on the gateway and check my
screenshot. I cc'd Sandra on this.
Dave Angelini Offgrid Solar
"we go
where powerlines don't"
http://members.sti.net/offgridsolar/ [1]
e-mail
13 matches
Mail list logo
