Re: [RE-wrenches] automatic transfer switches

There is the SMA Automatic transfer switch if you go with the SMA battery inverter and SMA pv inverter, it can be located seperate of the battery and inverter and will take up to 30 kwhrs. of capacity Just a thought On Mon, Nov 25, 2019, 10:52 PM Bill Hennessy wrote: > hi folks-- > > We're

[RE-wrenches] automatic transfer switches

hi folks-- We're installing a grid-tied, battery backup system on a farm where the service entrance is on a pole in the yard. At the single-phase, 240v, service entrance, there are two main breaker subpanels--one going to the house and one to the barn. The buildings are each about 100 feet away

Re: [RE-wrenches] Enphase

And with all Enphase adapters, don't forget to check for continuity and connector seating before assembling. On occasion, we've found opens in the adapters. bill Bill Hennessy Berks Solar, LLC 371 Centennial Rd Mertztown, PA 19539 o 610 682 4300 c 484 560 4666 NABCEP certified installer PA

Re: [RE-wrenches] Enphase

Hi Jay, Ran into the exact situation last install season with Enphase. After a lot of back and forth emails with pictures basically showing them I wasn't losing it, they finally deduced that they were packaging them wrong. So the package part number is correct but the adaptor inside the package