Re: [RE-wrenches] XW Pro Firmware 2.04 melting devices

a bad voltage regulator on the gen set. Ray Walters Remote Solar On 4/25/2024 11:24 AM, Kevin Pegg via RE-wrenches wrote: Hi Wrenches, Curious if anyone else has seen this issue. New XW Pro off-grid system installed Dec 2023. Pretty standard config for us, XW Pro, 5 kW PV, 50 kWh UnigyII battery

Re: [RE-wrenches] XW Pro Firmware 2.04 melting devices

Solar On 4/25/2024 11:24 AM, Kevin Pegg via RE-wrenches wrote: Hi Wrenches, Curious if anyone else has seen this issue. New XW Pro off-grid system installed Dec 2023. Pretty standard config for us, XW Pro, 5 kW PV, 50 kWh UnigyII battery, 8 kW high quality diesel generator. This system ran fine all

[RE-wrenches] Schneider CSW4048 / Lithium DD5300

Hello Wrenches, Has anyone been able to get a CSW4048 inverter to work with battery type set to Lithium? When I try that it gives a F89 battery discharge over-current error within a few seconds. The battery is at 100% SoC and there was only the inverter idle loads present. The CSW manual

Re: [RE-wrenches] Lithium batteries

Hi John, Do you know what firmware version was causing your initial over-voltage situation? Kevin From: RE-wrenches On Behalf Of John Blittersdorf via RE-wrenches Sent: Friday, February 9, 2024 8:09 PM To: RE-wrenches Cc: John Blittersdorf Subject: Re: [RE-wrenches] Lithium batteries Ray,

Re: [RE-wrenches] XW EQ question

: Re: [RE-wrenches] XW EQ question Hi Kevin Thanks, I heard that exact thing from someone else. Do you know if the CC are connected via Xanbus, does that also prevent EQ in the CC? Jay > On Feb 12, 2024, at 4:36 PM, Kevin Pegg via RE-wrenches > wrote: > > I have seen the sa

Re: [RE-wrenches] XW EQ question

I have seen the same behaviour on a few older XW6048's as well - including my own. It will go into EQ mode after completion of Absorb charge, but voltage does not increase as programmed. Adjusting the absorb settings manually is a clumsy workaround. I assumed it's a software bug. Kevin

Re: [RE-wrenches] Deka Duration

Yes, I’ve put a few systems together with these batteries, smaller ones. Some larger ones in the queue. The product itself seems well designed, and flexible for many different configurations – low or high voltage and scales from 1 to 100’s of batteries. The WiFi / Bluetooth software interface

Re: [RE-wrenches] Schneider Rapid shutdown with 2023 compliance

Hi Mac, I’ve just gone through a couple installations with a similar situation. The hardware you list does work as intended. I had to go through three different suppliers to get all the components. One thing that I didn’t find clear in the MPPT RS documentation is when a shutdown is

Re: [RE-wrenches] 48 V DC temp sensing relay

Have you considered using a thermostat? Like the A19 series. Mechanical, non-electric. Kevin From: RE-wrenches On Behalf Of Drake Chamberlin via RE-wrenches Sent: December-13-23 8:08 AM To: RE-wrenches Cc: drake.chamber...@redwoodalliance.org Subject: [RE-wrenches] 48 V DC temp sensing relay

Re: [RE-wrenches] Magnum 4448 PAE whimpy charge rate.

Hi John, Are these made in Mexico units? We have had a few issues with quality control since the relocation, not specific issue you have, but charger-related. There are two settings – Under the Shore menu make sure Amps are set properly, and then there is the battery charge rate in the setup

Re: [RE-wrenches] Cummins 13-kW to Schneider AGS

Hi Matt, Which specific model? I recently figured out the wiring for the Cummins CMQG 6kW. Find it easiest to order the external 5 pin switch and wiring harness and splice into that. Kevin -Original Message- From: RE-wrenches On Behalf Of Matthew Sherald via RE-wrenches Sent:

Re: [RE-wrenches] XW Drop in replacement inverter

gt; e-mail offgridso...@sti.net<mailto:offgridso...@sti.net> text 209 813 0060 On 2023-10-25 11:57 am, Kevin Pegg via RE-wrenches wrote: Physically it is all the same. Software is way more complex. As Dave mentioned, you have to follow the commissioning process. AC1 will no longer accept gen

Re: [RE-wrenches] XW Drop in replacement inverter

Physically it is all the same. Software is way more complex. As Dave mentioned, you have to follow the commissioning process. AC1 will no longer accept generator input, it’s grid-only now. So if you have a genset you will need to move that to AC2. This is one of the most irritating changes

Re: [RE-wrenches] Schneider Tech Support

I’ve not been able to get through to tech support via phone for some time now. Try emailing Rhodes rhodes.car...@se.com. Once he is engaged on an issue the support is quite good and is very knowledgeable about the product. Kevin From: RE-wrenches On Behalf Of

Re: [RE-wrenches] Sunny Island remote alerts

It’s a very poorly designed system. But it is possible to view the full error code on the webbox, but only while it is an active error. I don’t have a webbox online right now to advise exactly what parameter but it was near the bottom of the long list, and the description is not very precise.

Re: [RE-wrenches] XW Pro failures

with issues before. On Thu, Oct 12, 2023 at 9:29 PM Kevin Pegg via RE-wrenches mailto:re-wrenches@lists.re-wrenches.org>> wrote: Hello Wrenches, Curious if anyone else is dealing with failed Schnieder XW PRO6848’s this year? In recent months I’ve had 2 DOA (one producing 180/360VA

Re: [RE-wrenches] XW Pro failures

Hi Wallace, Interesting. Eric has in the past been responsive to my queries. I emailed him over 1 week ago about my most recently failed XWPro and have not heard back. I see he is replying fairly rapidly to your query. I shall bug him more next week. Kevin From: RE-wrenches On Behalf Of

[RE-wrenches] XW Pro failures

Hello Wrenches, Curious if anyone else is dealing with failed Schnieder XW PRO6848's this year? In recent months I've had 2 DOA (one producing 180/360VAC; one charger had this nasty building THD and ugly noise until it tripped out), and 2 fail after few weeks in service. One charger just

Re: [RE-wrenches] Schneider Conext SCP

Not sure if it’s quite public info yet, but the SCP is going to be available for purchase again. “In June 2023, Xantrex will begin selling the System Control Panel (SCP). The Xantrex SCP is functionally identical to the discontinued Schneider Electric SCP (part #865-1050-01). The only

Re: [RE-wrenches] WATER COOLED - 1800 RPM - 13KW GENERATORS INQUIRY

Thanks for this - there is certainly demand. I could see my company buying a 3-5 per year. Is there any estimate of timeline when these might be available? Kevin From: RE-wrenches On Behalf Of Dana Orzel via RE-wrenches Sent: June-30-22 11:02 AM To: 'RE-wrenches' Cc: Dana Orzel Subject: