I like pelican:http://www.pelican-case.com/ Dan BrownFoxfire Energy Corp.Renewable Energy Systems(802)-483-2564www.Foxfire-Energy.comNABCEP #092907-44
Original Message
Subject: Re: [RE-wrenches] Padded equipment cases.
From: Kent Osterberg k...@coveoregon.com
Date: Fri, August
-wrenches re-wrenches@lists.re-wrenches.org
Sent: Fri, August 13, 2010 3:30:51 AM
Subject: Re: [RE-wrenches] Padded equipment cases.
I like pelican:
http://www.pelican-case.com/
Dan Brown
Foxfire Energy Corp.
Renewable Energy Systems
(802)-483-2564
www.Foxfire-Energy.com
NABCEP #092907-44
I seem to remember reading about a source of custom padded equipment
cases, but can't remember when and where I did so. What I am talking about
is a sturdy (e.g. Al) case with closed cell foam in the top and bottom
halves and then a third inner 2 or 3 layer of foam with cutouts for
sensitive
, August 12, 2010 10:02 AM
To: 'RE-wrenches'
Subject: [RE-wrenches] Padded equipment cases.
I seem to remember reading about a source of custom padded
equipment
cases, but can't remember when and where I did so. What I
am talking about
is a sturdy (e.g. Al) case with closed cell foam in the top
I'm not aware of anyone doing these custom molds but I would encourage you to
reconsider a DIY system based on Pelican cases. These cases are super strong
(lifetime warranty), float, water and dust tight and the foam is perf cut into
cubes that you simply pluck out to create the cavities you
: Thursday, August 12, 2010 12:38 PM
To: re-wrenches@lists.re-wrenches.org
Subject: Re: [RE-wrenches] Padded equipment cases.
I'm not aware of anyone doing these custom molds but I would encourage you
to reconsider a DIY system based on Pelican cases. These cases are super
strong (lifetime warranty
I have had only good luck with Pelican cases; I have owned quite a pile
of them, from tiny ones to huge--cameras and lenses, video equipment and
mics, studio recording equipment. The quality of the finished
foam cube inserts inside just depends on the care you take, how sharp
your
To: 'RE-wrenches' re-wrenches@lists.re-wrenches.org
Subject: [RE-wrenches] Padded equipment cases.
Message-ID: 53532c1555dd4059a92655d5fc914...@angeles
Content-Type: text/plain; charset=iso-8859-1
I seem to remember reading about a source of custom padded equipment
cases, but can't remember when
http://www.tecratools.com/ is a decent company to work with.
I've been pretty happy with both of my tool cases I've gotten from them. I used
the tool back pack for years, and recently got a padded flight case with tool
pallets, meters are padded in the bottom.
R. Walters
r...@solarray.com
Years ago, I used to get custom cases made by Silton Company. They are
now owned by Olympic Case Company
but the facility in Fresno is still in use.
Kent Osterberg
Blue Mountain Solar
Peter Parrish wrote:
I seem to remember reading about a source of "custom padded equipment
cases", but
10 matches
Mail list logo