What would be nifty, is if the chase was at the angle of the roof, so
that its top edge was level. Then instead of being a trip hazard it
could be a step.
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760
On 8/14/201
How ever its done conduit or channel we really need to reduce the trip
hazard between sub arrays, It does not matter if its enphase or string
inverters keeping the conduit from this hazard should be on the list of "To
Do's" also
Jerry
On Tue, Aug 11, 2015 at 12:19 PM, August Goers wrote:
> Hi Wr
s
Sent: Tuesday, August 11, 2015 3:19 PM
Subject: [RE-wrenches] wiring methods between arrays
Hi Wrenches,
I have another best practices questions: what are you doing to run your PV
wire between arrays on a rooftops? This question has come up on this list in
the past but I’m still o
If you have attic access between the two roofs or separated arrays then install
a Soladeck at each array and run the interconnecting wires thru the attic. If
it is a DC circuit then Teck cable, or AC90 would be my choice of (armoured)
cable for running through the attic.
Benn Kilburn
SkyFire
-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf
Of August Goers
Sent: Tuesday, August 11, 2015 5:20 PM
To: RE-wrenches
Subject: [RE-wrenches] wiring methods between arrays
Hi Wrenches,
I have another best practices questions: what are you doing to run your PV wire
between
[image: Gradient Cap_mini]
Lic 773985
millersolar.com <http://www.millersolar.com/>
805-438-5600
*From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On
Behalf Of *August Goers
*Sent:* Tuesday, August 11, 2015 3:20 PM
*To:* RE-wrenches
*Subject:* [RE-wrenches] wiring m
enches] wiring methods between arrays
Hi Wrenches,
I have another best practices questions: what are you doing to run your PV wire
between arrays on a rooftops? This question has come up on this list in the
past but I’m still on the hunt for a robust and faster lower cost method. We
mostly i
Hi Wrenches,
I have another best practices questions: what are you doing to run your PV
wire between arrays on a rooftops? This question has come up on this list
in the past but I’m still on the hunt for a robust and faster lower cost
method. We mostly install outdoor boxes on each sub array and
8 matches
Mail list logo