[RE-wrenches] Solectria inverter needed

A close friend needs a Solectria PVI-2500 inverter to replace one that just got fried yesterday by lightning. If you have one lying around in old inventory or know someone that might please contact me. Thanks, Peter Talmage___ List sponsored by Redwood

[RE-wrenches] Whole house energy moniters

Does anyone have experience with whole house energy monitors that work with interfaced PV arrays. It seems most just deal with the array output as a load .  Thanks.  Peter Talmage ___ List sponsored by Redwood Alliance List Address: RE-wrenches

Re: [RE-wrenches] Enphase / Inverter failures

Hello Bill, I'm curious to know what the array STC DC rating to Fronius inverter AC rating you typically had? Thanks. Peter Talmage --- On Tue, 5/7/13, William Miller will...@millersolar.com wrote: From: William Miller will...@millersolar.com Subject: [RE-wrenches] Enphase / Inverter failures

Re: [RE-wrenches] Awkward Mid-clamps jigs for installing or removingmodules?

For those of us in snow country, the racking systems with mid-clips that have a stud with nut above the plane of the modules surface can make self clearing or clearing with a snow rake problematic. Peter Talmage ___ List sponsored by Home Power

[RE-wrenches] Pump

Does any one know of a source for a reliable 230 vac submersible water pump that will pump a gallon per minute at 300 feet ? Thanks. Peter Talmage, P.E. ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options

Re: [RE-wrenches] Pump

Tom, In this case the static water level is 16 feet down, but the delivery is about 1/2 gpm. The well is 500 feet deep, but I plan on a set depth of 300 so I should have about 400 gallons of water available and with any basic water management water should never run out. Peter

Re: [RE-wrenches] Interfacing an Air 403 wind generator

AEE Solar T(707) 825-1200 C(831) 325-9582 F(707) 825-1202 dk...@aeesolar.com www.aeesolar.com   On 5/5/2011 10:26 AM, Peter Talmage wrote: I have a client

[RE-wrenches] Interfacing an Air 403 wind generator

I have a client with an independent power system who is going utility interfaced. We are putting the 24 volt arrays on Ephase inverters. He wants the Air 403 to be interfaced as well. Has anyone done this and if so, how ?  Thanks Peter Talmage, P.E. Energy and Design

Re: [RE-wrenches] Interfacing an Air 403 wind generator

...@lists.re-wrenches.org] On Behalf Of Peter Talmage Sent: Thursday, May 05, 2011 11:26 AM To: RE-wrenches Subject: [RE-wrenches] Interfacing an Air 403 wind generator  I have a client with an independent power system who is going utility interfaced. We are putting the 24 volt arrays on Ephase

Re: [RE-wrenches] Boiler on SW inverter

  Responsible Technologies for Responsible People since 1988   From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Peter Talmage Sent: Wednesday, November 03, 2010 1:29 PM To: RE-wrenches Subject: [RE-wrenches] Boiler on SW

[RE-wrenches] Boiler on SW inverter

Has anyone had any experiences operating a Triangle Tube Prestige boiler on a Trace SW 4024 inverter? Is the wave form clean enough to not confuse the electronics? Years back I operated a Polaris condensing water heater with a Trace and had no problems. Thanks,  Peter

[RE-wrenches] boiler on inverter

. Peter Talmage, PE ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org