Waterproof enclosure, cable glands, DIN rail, DIN terminals, jumpers. Fuse
if applicable. Build to suit your needs.
On Thu, Oct 6, 2016 at 8:10 PM, Allan Sindelar
wrote:
> Corey,
> The Ilsco would work, but they're quite expensive and aren't likely rated
> for exposure
This is what I would use, Corey.
http://www.elecdirect.com/lug-compression-connectors/insulated-power-connectors/insulated-powerbar-4-14sol-single-sided-entry-3-conductors-clear?gclid=CIaN4KHKyM8CFURbhgodTlwGxA
Daryl
> We're looking for a way to transition from #6 PV wire to #8/#10 PV wire
>
Fused combiner in reverse.
On Thu, Oct 6, 2016 at 6:22 PM, Corey Shalanski
wrote:
> We're looking for a way to transition from #6 PV wire to #8/#10 PV wire
> wye-harnesses. Unfortunately Multi-Contact doesn't seem to manufacture a
> #6-compatible MC4 connector. Has
:23 PM
*To:* RE-wrenches@lists.re-wrenches.org
*Subject:* [RE-wrenches] #6 PV Wire Transition
We're looking for a way to transition from #6 PV wire to #8/#10 PV wire
wye-harnesses. Unfortunately Multi-Contact doesn't seem to manufacture a
#6-compatible MC4 connector. Has anyone else had t
Could you use one of those insulated Ilsco terminal blocks (sorry, don't have a
part number handy) to transition the #6 to short length of #8/10 then put your
#8/10 connector on the short piece?
Benn Kilburn
SkyFire Energy Inc.
780-906-7807
> On Oct 6, 2016, at 4:22 PM, Corey Shalanski
We're looking for a way to transition from #6 PV wire to #8/#10 PV wire
wye-harnesses. Unfortunately Multi-Contact doesn't seem to manufacture a
#6-compatible MC4 connector. Has anyone else had to deal with this? or has
any creative solutions?
--
Corey Shalanski
Joule Energy
New Orleans, LA
6 matches
Mail list logo