Mathew,
The TLD1693E Power Amplifier is rated at 100 watts continuous duty, for
the 150.8 to 162 MHz split. It is designed to provide full output with
an RF drive of about 400 mW. The DC power input is 12.8 VDC at 20.5 A.
The small pin on the side of the amplifier connects to one of the Keyed
It's a MICOR VHF 100-Watt continuous-duty rated PA Deck, for the 150.8 to
162 MHz Range. The input power is about a half watt (actually 0.4 watts)
for typically 100 watts out. Your best bet is to get a MICOR manual to see
how to set it up. The actual PA circuit board is the same in the MICOR
Hi Andrew; I have a original GE UHF MVP manual for sale, It is in
GREAT condition! $25.00 Plus shipping. Thanks, Bill N8LXM
kc2eus wrote:
I'm looking for a source for a GE Custom MVP manual UHF version.
Thanks
Andrew
KC2EUS / GM1YMI
Yahoo! Groups Links
Yahoo! Groups
Bill:
I also need a UHF MVP manual. If Andrew doesn't want it, let me know.
Kim , K5TU
-Original Message-
From: Bill [mailto:[EMAIL PROTECTED]
Sent: Monday, May 31, 2004 6:10 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] GE Custom MVP manual wanted
Hi Andrew;
$40 plus $13 shipping for one chip (DS275) in a DB-9 connector !!!
Man, am I in the wrong business
73, Dick, W1KSZ
-Original Message-
From: Andrew Pepper [mailto:[EMAIL PROTECTED]
Sent: Monday, May 31, 2004 5:51 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re:
If you are not using a pll exciter, it's hard to get the isolation..
Kerry
- Original Message -
From: Kevin Custer [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, May 31, 2004 12:07 PM
Subject: Re: [Repeater-Builder] Wacom WP-641, correction on its specs...
kerry wrote:
If you are not using a pll exciter, it's hard to get the isolation
Kerry
The type of exciter used has nothing to do with how much isolation the
duplexer exhibits.
Kevin Custer
Yahoo! Groups Links
* To visit your group on the web, go to:
Actually it depends on the Density of the Liquid material...
Coy Hilton wrote:
It's like a 8 ounce glass,
it doesn't matter what liquid you put into it, it still holds 8
ounces.
73
AC0Y
--- In Repeater-Builder@yahoogroups.com, kerry [EMAIL PROTECTED] wrote:
If you are not using a
Huh??
Original Message:
-
From: Coy Hilton [EMAIL PROTECTED]
Date: Tue, 01 Jun 2004 02:26:08 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Wacom WP-641, correction on its specs...
The Duplexer will provide a specified amount of isolation. It has
I am looking for someone that can help with the programming of a
Motorola Syntor 8 Channel Radio. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
Most likely,yes!
- Original Message -
From:
[EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, May 31, 2004 11:59 PM
Subject: [Repeater-Builder] Another
question on the ICOM FR-4000 Repeater
Someone from the list gave me some good info on
I am looking for a Micor Amp TLD1692 rack mount amp. Email me off
list with cost shipped to 46366, condition of amp. Thanks.
Mathew
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send
need just to activate the repeater function.
- Original Message -
From: randy kisthardt [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, May 31, 2004 1:39 PM
Subject: [Repeater-Builder] Re: zetron 30 manual
--- In Repeater-Builder@yahoogroups.com, Stephane
Matthew and all,
I'm currently working on documentation for a modification to allow use
of the VHF Syntor in the 2m ham bands. As soon as I get it finished, I
will post it to the Repeater-Builder's website.
As far as programming itself, there are a few people out there who can
actually burn a
Mathew -
What version of the Syntor do you have?
The Syntors came several flavors, and each required a different approach for
programming.
See the link to Mike Blenderman's page below for more info.
http://www.open.org/~blenderm/syntorx/index.html#top_home
E-mail me with your model # and I'll
Back to the project...getting a 147.09tx/147.69rx repeater and 144.39
APRS on the same antenna...I received many good answers and links to
assist me.
HOWEVER...looks like the costs are such that I could consider another
route..namely two antennas/transmission lines, one for 144.39 and the
mark. matt et al...
syntor programming available at
www.brinkleyelectronics.com talk to andy.
mdm ted
=
Ted Bleiman K9MDM
MDM Radio Ltd -
1629-B N. 31 st Ave
Melrose Park, IL 60160
708.681.0300 fax 708.681.9800
web http://www.mdmradio.com - all new check it out!!!
See our website
Hi ted, thanks, I sent him an email, am waiting on him to get back with me
to see if he is able to program these for me. Appreciate it.
Mathew
- Original Message -
From: Ted Bleiman K9MDM - MDM Radio [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, June 01, 2004
I have a Micor TLD1693 amp, designed for the 150 to 162 Mhz range,
and am told that the amp will not operate at the 146 Mhz range, told
that componets have to be changed. Here is what I don't understand
about it, maybe someone can help expain it. Into a Cushman serive
monitor, I'm getting
No secret that Parts Tolerance can have a significant bearing... mix in
a little component aging all those +/- 10% values add up!! Sometimes,
despite the Design Specs, ya just get lucky.
Yahoo! Groups Links
* To visit your group on the web, go to:
You mite want to give ARR (the preamp folks) a call they have just what you
need and the price is right. They are up in Burlington CT. Great people.
At our receive site we used a power divider and two pre-amps it works well
but we are in a very low RF area with that site. They have a nice reciver
--- [EMAIL PROTECTED] wrote:
Hi, all --
I am on the technical committee of an amateur
repeater club. A club in the next county has
approached us to ask about sharing one of our 2m
receive sites with them. It's a commercial site and
we are there at the pleasure of the owner, who is
The shared receive antenna is the easy part of the proposal and as others
indicated there are a couple of ways to do this. Even a cheep mobile
duplexer would likely work for feeding the two VHF receivers, as they are a
reject only duplexer and as your both receiving there is really nothing to
Is there any way that you can get one of the antennas into a
different horizontal plane? i.e. mount the new antenna a few feet
lower? Your vertically polarized antenna does not put out much
power in the straight down direction, so even 15-20 feet might
buy you enough isolation.
This may help:
At 08:03 PM 6/1/04 +, you wrote:
Hi, all --
I am on the technical committee of an amateur repeater club. A club in
the next county has approached us to ask about sharing one of our 2m
receive sites with them. It's a commercial site and we are there at the
pleasure of the owner, who is
--- In Repeater-Builder@yahoogroups.com, Neal Newman [EMAIL PROTECTED]
wrote:
Actually it depends on the Density of the Liquid material...
Coy Hilton wrote:
It's like a 8 ounce glass,
it doesn't matter what liquid you put into it, it still holds 8
ounces.
73
AC0Y
26 matches
Mail list logo
