I have it - it's called 'tplot_53.exe' - it's a DOS program that
allows you to enter the feequency of antenna desired, the distance from
the tower, and azimuth (?) and then plots a diagram of the signal pattern
that you can peruse or print.
Spam me direct now if you want a copy, or wait
If You Want I have A unit out of A WV State Police Car With UHF To Low Band
VHF With Cables to Interconnect Would Might be able to use High Band radio
in place of Low Band I think they are Micor
DaleN8SAC
- Original Message
I found a copy on the web... if it's the same program?
http://www.lu5cba.org.ar/tecnical/SATELITE%20-DOS/ANPLOT/
cheers,
skipp
Adam T. Cately [EMAIL PROTECTED] wrote:
I have it - it's called 'tplot_53.exe' - it's a DOS
program that allows you to enter the feequency of
antenna
Talley and Tesco... my firt perfernce is Talley because
they have less of a voice mail hell path to get to a warm
body.
cheers,
skipp
Roger White [EMAIL PROTECTED] wrote:
Where is a good place to buy this antenna w/o having to
wait for it to be built?
Roger W5RD
[EMAIL PROTECTED]
Thank you Chris.
--- In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote:
I sent the mods for this to Kevin some time ago, they are on the
Repeater-Builder site here
http://www.repeater-builder.com/db/db-4032-conversion.gif
I use one and it works fine.
Chris
N9LLO
Hi Steve,
The question should be, can the Decibel DB-4032
duplexer be adjusted up into the 53MHz Amateur
Repeater range without physical modifications.
Some people will probably try to first use just
a generic retune method without satisfactory results.
Since the electrical adjustments are
Dayton Hamvention Input Wanted.
My friend Tom is directly involved with the Dayton
Hamvention. His position in the 2006 year project
is more toward the public relations side.
He has asked me to poll you folks for new ideas,
opinions and information for the 2006 Hamvention.
The primary
Skipp, its pretty much the same. Mine is V5.4, not a big deal.
So, Mike, Mikey, and Charles, there you go. I was in the process of
wresting with being able to email an executable file to send to you,
but now you can get it yourself... Have fun.
Thanks to Adam too.
Laryn K8TVZ
--- In
HAMCATION in sunny Orlando Florida February 9 through 12, 2006.
One of the largest fun...HAM shows in the south east. This time of the
year the weather is usually GREAT, NOT TOO HOT NOT TOO COLD. The
family will want to come to. after all we have Walt Disney world,
Universal Studios, and Sea
First off, don't get in any hurry about delivery time. rfguys' expedited
shipping of $12.60 for the 8 ounce package will probably get it to you before
the 1st week of December.
After you get over the delivery time, their module and program are completely
usable.
You will need to be sure to
Some time ago my wife mentioned that IF she were ever to come to Dayton
during the Hamvention, she'd probably spend time at Wright-Patt. There's
lots to see there, including several former Air Force One aircraft.
Rod, N1FNE
-Original Message-
From: Repeater-Builder@yahoogroups.com
Kevin,
This sounds like a classic intermod problem. Does your
repeater and the new one each have a dual isolator on
its transmitter?
Yes, you will need a dual isolator on your repeater
transmitter as well as the new one 30 khz away.
John Lloyd, K7JL
Intermountain Intertie
Thanks for your thoughts, John. I have not pursued intermod as
a potential cause of this problem because there is not any other
audio present on the signal head 30KHz away from our carrier
frequency, and the offending signal is always present when our
system is keyed up. There are not isolators on
I am trying to wire a link radio to the rc210. My problem is COS/COR
can't really find it. found ptt,tx,rx audio. I did find data in that
dosen't help. Can anyone help me out . The radio I have is the Icom
IC207. If any one has any suggestions for a easy link wiring radio
please let me know
Check it out, a real topo RF plotting software package
for the El Cheapo HAM Price, FREE!
Most Hams fit this category.
http://www.cplus.org/rmw/english1.html;
Granted you guys will need to read the instructions on
how to use the software, but other than that it's
FREE
Regards,
15 matches
Mail list logo
