Hi Bob,
[EMAIL PROTECTED] wrote:
Distortion is not the only issue in using speaker audio as repeat
audio. In many cases there is additional filtering in the speaker
audio chain that can degrade repeat audio.
I have not run into that being a problem.. in fact in an ideal
world the
I haven't messed with Hamtronics repeaters for about 20 years, but at the time
they specified coupling speaker audio, and their repeaters sounded really flat
and clean.
73,
Paul, AE4KR
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent:
I forget which specific mailing list had the first note about hams
making sure to make comments on the official request to the FCC by a
manufacturer who wanted a waiver to operate a 25W ERP unlicensed
devices in operating rooms, for use in RFID tracking things used in
surgeries, to make
Hello All,
Yesterday, I had to go up the mountain to the repeater site because I
noticed that my GE voting receiver was not working. When I got there,
I found that one of the fuses had blown. I believe it was fuse 801
and it had a 1amp glass fuse in it.
Not being fully equipped to trouble
Adam;
I would look at the caps in the 10v regulator area and make
sure they are modern newer capacitors, the other thing is that
there was a mod on some IFAS boards that had a capacitor in the Audio
transformer feedback loop that was changed from a cap to a resistor
or from a resistor
I'm presently looking for new worldwide working opportunities in the
2-way radio arena. Have 30+ years experience in LMR plus a few in
Wireless Broadband (Alvarion and the like) equipment. I wanted to ask
for suggestions as to where I should post/publish my resume in order
to maximize my return on
I am looking to buy an Astro modem daughterboard card for the Quantar
wireline board for our ham repeater. Anyone have one they are willing
to sell or know where this is one available? Please email me off group.
n9pay_at_wi.rr.com
I would put an ammeter in series with the receiver and
check the current being drawn. You may have a filter
cap going bad and the current may be up near the 1 Amp
fuse rateing. Sometimes a fuse being operated near
its rateing will not blow immediately, but will blow
hours after it is replaced.
you might also try dice.com
On Dec 11, 2007 9:32 AM, Chad Stiles, N9PAY [EMAIL PROTECTED] wrote:
Alex (and others)
I talked to a friend of mine who works for a human resources business and
she suggested to try posting in on monster.com or careerbuilder.com. HR
Recruiters commonly use
Be wary of big sites like Monster.com and others. I have heard that some of
them have had security breaches and 'loose' requirements allowing noncompanies
to 'harvest' your info for identity theft purposes..
To: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Tue, 11 Dec 2007 09:44:56
Is there anyone on the list who has any knowledge of how
to work the IFR 1100S? I need help with a couple of
things on them.
Thanks,
Vern
KI4ONW
Hi Skipp, Joe and other,
Many thanks for your help, last night I received by e-mail the older version
of CE5 software to program out of band the Vertex FTL-1011 VHF low band
radio.
If anybody of you need the version 3.0 I have it, just let me know at
[EMAIL PROTECTED]
Thanks to the group.
Does anybody have an inexpensive source for replacement center pins??
--
Jay Urish W5GM ex. KB5VPS
ARRL Life MemberDenton County ARRL VEC
N5ERS VP/Trustee
Monitoring 444.850 PL-88.5 146.92 PL-110.9
--- In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote:
Hello I have a 1500 maybe I can help you...
Roger KG6TZT
Is there anyone on the list who has any knowledge of how
to work the IFR 1100S? I need help with a couple of
things on them.
Thanks,
Vern
KI4ONW
You can try the RF Connection in MD. I think they used to sell the pins
only:
http://www.therfc.com/
I didn't see them specifically listed, so you might need to e-mail or call.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
612 Barnett Rd
Boswell, PA 15531
- Original Message -
From:
Vern
I have one--
Ask questionsI'll try to answer them
Scott
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, December 11, 2007 10:33 AM
Subject: [Repeater-Builder] IFR 1100S
Is there anyone on the list who
Hi Eric,
I went back to the site today and pulled the receiver chasis. I'm
more of a SpectraTac person myself so bare with me.
This receiver is a 19 inch rack mount voting MastrII receiver. The
only number stamped on the rear of the chasis is 19D41754GG7. It has
two optional boards
Adam,
Thanks for getting back to me! Your Auxiliary Receiver is a 19D417546G7.
(The first G is a 6) The LBI that covers that unit is either LBI-4915
or LBI-30766. The latter LBI is available here:
www.repeater-builder.com/ge/lbi-library/lbi-30766l.pdf
I hope this information helps you
Hey Guys,
Great little group you guys have here! Good Stuff!
I am trying to search the messages but it keeps coming up 'server busy'.
I am after a website or specific 'message' where I can fond
information and/or a module to suit the GM300 series radio to creat a
link between two repeaters. I
How much degredation can I expect for a mid-split MSR2000 moved to
144/145 MHz?
--
Kris Kirby, KE4AHR [EMAIL PROTECTED]
But remember, with no superpowers comes no responsibility.
--rly
Comments scattered in the text...
At 08:25 AM 12/11/07, you wrote:
Be wary of big sites like Monster.com and others. I have heard that
some of them have had security breaches and 'loose' requirements
allowing noncompanies to 'harvest' your info for identity theft purposes..
I understand
21 matches
Mail list logo
