What software Rib interface is used on a Motorola SM-120?
Were can I locate the information on programming Motorola SM-120?
Thanks for your time.
73's, Jim Kh6jkg.
It's never enough to make a profit, and never cheap enough to have a ham
pay for it.
We certainly are a parsimonious group of people. ;-)
73, Joe, K1ike
On 4/17/2010 11:39 PM, Mel Swanberg wrote:
I probably could, but I never know what to charge for stuff like that.
Mel - WA6JBD
That's a tough one. Mostly related to your financial situation and time
available. I suspect that you wouldn't have many come your way, so being
inundated isn't likely.
If it were me, I'd cover all my actual expenses. Then I'd figure how long it
takes, on average, to do the work. Figure a
Jim,
The same manuals cover both the SM50 and the SM120, as follows:
Service Manual 6880903Z45, about $22
RSS (Programming) Manual 6880902Z78, about $15
A standard RLN4008 RIB and the HKN9217 programming cable are specified, but
almost any setup that works with Radius, GM300, and MaxTrac will
--- In Repeater-Builder@yahoogroups.com, George gueorg...@... wrote:
i'd like to program a mtx8250 and seems that i need the HVN9067E or HVN9067G.
if anybody can help thank you!
ok, i have it found! it works and it is the most current one. if anybody needs
it contact me by e-mail
These radios work killer for link radios in the 430 band. You have to hex edit
the software but many are still in operation to date.
Mike Mullarkey K7PFJ
6886 Sage Ave
Firestone, CO 80504
303-736-9693
k7...@skybeam.com
On Apr 18, 2010, at 7:32 AM, Eric Lemmon wrote:
Jim,
The same
I have some tone boards that I no longer need.
Two are Regency 504-046B
Three I think are EF Johnson, they are marked 006B036 with a serial
number after that on a gummed label. These had a daughter board,
which I think, sets the frequency.
I have one unknown board marked PD-085AA with a black
Anyone have an idea what band the Andrew APT-DFDM-3 is for?
APT is the series, DF/DM refers to the 7-16 DIN connectors, -3 has me stumped.
I picked up 6 of them in sealed bags, but no documentation.
Martin
Hi Group,
I have a Vhf Micor unified station that was modfied prior to ownership. The
Mods for the Station control module were performed as on the RB site. The
problem I am having is there is no PTT on pin 5 of the back plane. Is there
something i should check ? The Station control module is
OK Mike thanks for your reply. The duty cycle is minimal. The frequency of the
repeater that I'll be linking to is 224.280 (-) and I plan to use about 20
watts into a pair of vertical yagis at 185 ft pointed southeast. At the site I
will also have a full time link to a 70 cm hub repeater with a
On Date: Sun, Apr 11, 2010 4:06 pm
From: kh6...@netscape.net
To: Repeater-Builder@yahoogroups.com
Thanks for your section in the Motorola Micor, Modification of the older
Station Control Module TLN4635B,
By Kevin Custer W3KKC.
On the repeater-builder, web page is picture of the board layout.
11 matches
Mail list logo
