[Repeater-Builder] Question for the group

that are on the 2 machines . Merrill KG4IDD

Re: [Repeater-Builder] Re: VHF Vari-Notch Duplexers - 2 x 2 x 4 ???

Tx-Rx model 28-41-05 Vari-Notch pseudo-pass, notch duplexer. This is the appx two RU duplexer for wide split repeaters, Comprised of five of the two inch square cavities. Tx-Rx manual says 2.5 mhz spacing. Tag says Tx 1.5 dB insertion for 76 dB isolation, and Rx is 1.1 dB for 110dB(Tx is 76dB at

Re: [Repeater-Builder] Re: VHF Vari-Notch Duplexers - 2 x 2 x 4 ???

Next question what channel spacing are you tuning them for ? Merrill KG4IDD On 1/28/2010 8:56 PM, tahrens301 wrote: Hi Merrill, Yep, that's what the label says. Now, gotta figure out why they aren't living up to specs. Tnx Tim --- In Repeater-Builder@yahoogroups.com, Merrillkg4

Re: [Repeater-Builder] supply

I can not find a tpn # that is the problem . This supply worked great until it started putting out 22 volts I am thinking of repairing it .but working blind is not my style. Merrill KG4IDD Jeff DePolo wrote: I was going to guess Motran, but it's been so long since I've seen one I can't

[Repeater-Builder] MR4 receiver

I have a MR4 receiver that the squelch will not close on . any ideas . Merrill KG4IDD

Re: [Repeater-Builder] Cellwave Duplexers

A small mobile duplexer will due fine for your use Merrill KG4IDD WPTZ430 Richard Bessey wrote: All, I am hopeful you could all enlighten a beginner. I have a GMRS repeater up and rolling with two antennas using a Uniden ARU-251 repeater. Its not perfect but it works. I am shopping

[Repeater-Builder] tld 2602a

What is the min and max drive needed on a tld 2602a .I have one and I do not have the specs. Merrill KG4IDD

Re: [Repeater-Builder] Re: Motorola TLD6612A amp repair

if you have an amp that is tube I would be interested for 2m contact off list merrill kg4idd kg4idd at gmail.com [EMAIL PROTECTED] wrote: What series station is thisTLD6612A amp used in? MICOR? MOTRAC? -Original Message- From: Thomas Oliver Sent: Feb 25, 2008 3:01 PM

Re: [Repeater-Builder] Re: 3 Channel UHF Ferrite Combiner

I would have interest in this also as I need to combine 443.150 and 462.600 to 1 ant thank you Merrill KG4IDD Mike Mullarkey wrote: HI Skip, Very tight outdoor cabinet. We need to combine TX 447.750, 447,850 and 464.900 into one antenna. I know this is not optimum but this is what we

Re: [Repeater-Builder] Re: Would You..... tower height question

199 feet merrill kg4idd texasexpediter wrote: What is the maximum height a tower can be without falling under all the lighting, painting etc. regulations? Yahoo! Groups Links

Re: [Repeater-Builder] VHF to UHF mod. for duplexer

So would I I will trade him 2 sets of uhf duplexer for 1 vhf KG4IDD Jeff DePolo wrote: I'd be happy to trade you (or anyone else) a nice UHF duplexer for your highband duplexer. Have many to choose from... -Original Message- From: Repeater-Builder@yahoogroups.com

Re: [Repeater-Builder] Re: When 4, 6 or 8 Cavities just won't due...

they are all notch Cavities merrill KG4IDD Coy Hilton wrote: Here is another possibility, it could be a standard duplexer with two receive outputs. The cans could be Bp Br, using a High Q caps in the loops. I really cant tell. --- In Repeater-Builder@yahoogroups.com, skipp025 [EMAIL

[Repeater-Builder] receiver

I need to hook up a non Motorola receiver to a micor repeater I am going to remove the original and want to use the Motorola hang trimmer card and timeout timer card need to know were to hook up cos and audio in 440 band Any help please 73 merrill KG4IDD Yahoo! Groups Links