through the front panel with three positions. Fast, slow and center
not scan.
Any documention or information would be appreciated.
Happy Dayton, Dale K0JXI
-
From: k0jxi
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, May 09, 2009 12:52 PM
Subject: [Repeater-Builder] 450 Micor Repeator Amp
I am sure this has been asked before but I could not find any comprehensive
links.
Will the Motorola 450 to 470 75 watt Micor
I am sure this has been asked before but I could not find any comprehensive
links.
Will the Motorola 450 to 470 75 watt Micor Repeater Amp TLE1713A work safely in
the ham band on TX of 444.900. Most of my experience is with GE and not
Motorola.
Appreciate any advice.
Dale, K0JXI
-I will take all of those plug in if they are not sold. I have a
1200 I use as back up and a friend that has one.
Thanks, Dale K0JXI reply to [EMAIL PROTECTED]
-- In Repeater-Builder@yahoogroups.com, John Sichert [EMAIL PROTECTED]
wrote:
I have 5 plug-ins for the Motorola 1200A / 1327
I have a set of two can motorola pass reject that will work well up to
40-50 watts if you think that will do. What type of repeater are you
using? I can tune them up also.
73, Dale k0jxi reply to [EMAIL PROTECTED]
--- In Repeater-Builder@yahoogroups.com, Scott [EMAIL PROTECTED] wrote
to hook him up with a radio. I need to look at the diagrams
more closely and see where they inject both the audio and PL.
Thanks, Dale
-- In Repeater-Builder@yahoogroups.com, wd8chl [EMAIL PROTECTED] wrote:
k0jxi wrote:
Can anyone tell me if the GE Delta, Phoenix, MLS or MVS use
direct FM
Can anyone tell me if the GE Delta, Phoenix, MLS or MVS use direct FM
modulation or phase modulation. Could mot find an exact reference to
the subject in the manuals. Since the units are synthised I suspect
they are Phase modulation?? I have a master 2 with the PLL channel
element that I
, Jack Taylor [EMAIL PROTECTED]
wrote:
I once cut down 4 VHF cavities for a BP/BR 222 duplexer. Fairly
straight forward but
probably not worth the labor involved.
Jack - N7OO
- Original Message -
From: k0jxi
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, August
. Please reply to
[EMAIL PROTECTED]
Thanks, Dale K0JXI
]
Thanks, Dale k0jxi
the question and I am not familiar with the
radio.. I have built several repeaters out of Exect two with good
results. I would be worried about the receiver front end and over all
selectivity for 600 kc spacing.
Any thought would be appreciated.
Send to [EMAIL PROTECTED]
Thanks Dale K0Jxi
thing.
73, Dale K0JXI
Anybody got a dead/parts 1200 Motorola service monitor??? Looking for
a good 1 mhs oscillator module to buy. Mine went dead. Appreciate
any help. Contact me at [EMAIL PROTECTED]
Thanks, Dale K0JXI
There was a discussion a while back about getting or modifing a 40
watt high band phoenix to run clean at low power say 1 to 10 watts.
Did anyone come up with a idea how to do this? Was wanting to do the
same myself
Thanks, Dale k0jxi
Yahoo! Groups Links
* To visit your group
Can anyone tell me who the moderator for the MSF5000 group is?
I need to get a hold of him.
Thanks, Dale K0JXI
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL
Anyone have any experience with a 450 MCR 100 Desktop repeater??
What does it take to program it? I have the manual.
Thanks, Dale k0jxi
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group
)
tolerance - still better than no crystal reference at all.
Just a thought,
Neil - WA6KLA
k0jxi wrote:
Looking to buy the 1.0 Mhz reference oscilator. Mine failed and
looking for a replacement. This one is the square octal plug in
assumbly. Anyone having a dead 1200 that wants
site at [EMAIL PROTECTED] for a quick discusion
Would like to get some idea to see if it is repairable.
Appreciate any help.
Thanks, Dale K0jxi
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from
Have you sold the 5K and if not how much?
73, Dale K0JXI
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject
U have various VHF Engineering kit built and un built and not that I
think about it a have the original 2 meter repeater built that I would
be willing to sell. Let me know what you are interested in .
73, Dale
--- In Repeater-Builder@yahoogroups.com, Mark Nallick [EMAIL PROTECTED]
My personal post did not come thru too clear but I have a number of
VHF Engineering unbuilt kits, wired boards and even one complete two
meter repeater if you are interested.
73, Dale k0jxi
--- In Repeater-Builder@yahoogroups.com, n7zef [EMAIL PROTECTED] wrote:
I have a receive section
Where is the best place to find information on interfacing a analog
MSF5000 to a external controller
Thanks, Dale k0jxi
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email
What is the overall length of the dipole on a 224E? I thing it is 37
inches but cant remember for sure.
Thanks, Dale K0JXI
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email
Anybody know the proper tuning procedure to peak up/ move freq for
the GLB preamp/preselector to maintain the rated selectivey?
Dale K0JXI
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group
. No labels with other model numbers seen. I have
several overall pictures that I will send off site. I am familiar
with some of the 500, 700 and 1000 series mobiles but I think this may
be newer. Appreciate any help.
Thanks, Dale K0JXI
Yahoo! Groups Links
* To visit your group on the web
help me? Kevin, I think you know what I am talking
about.
Thank, Dale K0JXI
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo
Need some comments on how well a DB210 would work as a repeater
antenna. Know there is no gain but wondering just how well the
antenna works or if it is a POOR choice? Will be up 36 stories and
the previous antennas fell victum to too much wind.
Thanks, Dale K0JXI
Yahoo! Groups
Looking for several coupling loops for the high band DB Products 4001
passband cavities. Willing to buy or tade for 450 loops. What do you
have.
Thank, Dale K0JXI
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder
What is the lowest possible frequency that one could expect to retune
a 450 to 470 SX Phoenix and keep it stable with usuable sensitivity on
the rx? What I am wanting to do is get one down to the 421 to 425
range.
What about a MVS to do the same?
Thanks, Dale K0JXI
Yahoo! Groups
Question-- Sorry if has been asked before. Will two separate
Maxtrac/Maratrac make into a good UHF ham repeater?? What are the
pitfalls or things to watch out for? Asking for a friend.
Thanks Dale K0JXI
Yahoo! Groups Links
* To visit your group on the web, go to:
http
Can anyone tell me the slug or point you use to set the rx and tx
frequency on the vhf and uhf SX Phoenix. I have gone through the
manual several times and cant find it. I may be missing a page.
Thanks, Dale k0jxi
Yahoo! Groups Links
* To visit your group on the web, go
Was is the best/proper way to undo the noise blanker on a low band
Master 2/ Exec 2 receiver in a mobile used as a repeater. I know that
the blanker is not supposed to be used because of isolation problem
when using band reject duplerers.
Thanks, Dale K0JXI
Yahoo! Groups Links
What I was hoping was for someone who might have some extra elements
already crystaled for some frequency in the ham band.
The current elements are TX-KXN1088A and RX KXN1024A.
Thanks for the reply
Dale
--- In Repeater-Builder@yahoogroups.com, Neil McKie [EMAIL PROTECTED]
wrote:
I
have some that might want to get rid of. Would
have to look at the actufal freq on a as is basis. The location is
where there are few repeaters so the chance of a getting a unsed pair
is good.
Thanks, Dale K0JXI
Yahoo! Groups Links
* To visit your group on the web, go to:
http
Wonder if you ever got my email to you about the uhf cavities I have for sale??
Dale k0jxi
--- In Repeater-Builder@yahoogroups.com, Ken [EMAIL PROTECTED] wrote:
Hi, I am looking for purchase 2 bandpass filters. I need two tight
filter for a project. I have a GR300 at a high site and need
a transmitter or
receiver
fails.
Jim, KC1RM
- Original Message -
From: k0jxi [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, May 18, 2004 3:20 PM
Subject: [Repeater-Builder] 2 Delta S's as a UHF repeater
Just wonder if anyone has used two 450 Delta S model
Just wonder if anyone has used two 450 Delta S model radios with one as the
receiver and one as the transmitter for a repeater
Thinking that the narrowband models might have the needed isolation for
installation
Thanks, Dale
Yahoo! Groups Links
* To visit your group on the web, go
Have not looked at all the posts about the z matcher but has anyone memtioned
that DB Products makes one for several
bands---150 and 450 and probably other bands. They have a reflected
voltage/wattage metering circuit built in and one
tunes it for min reverse reading. Just a simple pi network.
Are you talking a mobile, base or repeater
73, Dale kojxi
--- In Repeater-Builder@yahoogroups.com, ac6vj [EMAIL PROTECTED] wrote:
Does anyone have a MICOR Low Band Low Split or Medium Split thay
would like to sell.
Gregory Gordon AC6VJ ([EMAIL PROTECTED])
Your use of Yahoo! Groups
39 matches
Mail list logo