OK now that I have my circuit working I would like to try something else. I
would like to have 2 different com ports be able to key the transmitter. At
first I was thinking maybe I needed an OR gate to do this however I was
thinking I might be able to do it much easier.
If I connect both DTR
Well I was over at the junk store looking for UHF commercial radios for
the GMRS project and didn't find anything for that but did find the
drawer unit for a low band GE Delta for $5.00.
So now what. I would love to be able to slide this thing into 6m and
use it for something.
How does one
crystals for those types. To verify
that your radio is programmable you will find an XR2212 EEPROM near
the microprocessor in a socket. This is the chip you remove and plug
into the RFGuys programmer.
RFGuys markets their unit on Ebay.
73 - Jim W5ZIT
mung_bungholio [EMAIL PROTECTED] wrote
I am trying to get my PC connected to my RC-1000.
Is there any reason why I couldn't just take the 5v high line from the
computer's serial port to the COS line on the Remote Repeater Line? It
goes high when Echolink wants to send audio out to the repeater.
Also I tried to connect an earphone
I got my duplexers in today and everything seems to be running OK.
One of the next things I need to do is get Echolink running from the
controller instead of a radio linked into the repeater.
Does anyone know the best way to wire the PC into an R1000V repeater?
One other issue I am having is
COS signal isn't
reliable. Every once and a while it will key up right but most of
the time it doesn't.
I guess the next step is to find out which line they are pulling the
COS from and see if that may be an issue.
Any other suggestions?
--- In Repeater-Builder@yahoogroups.com, mung_bungholio
filter that requires a time delay
before it keys the repeater. This can be turned on and off.
Might be more specific on the problem.
73, ron, n9ee/r
From: mung_bungholio [EMAIL PROTECTED]
Date: 2007/07/10 Tue AM 10:21:31 CDT
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater
Well I got brave and opend the radio up. It wasn't as cludged together
as I thought it would be. I took the COR off or the RUS line instead
of the CAS and it's working fine now.
I am still having problems with the programming but that is mostly
because a couple of the dtmf keys on my radio
I purchased a GE MASTR II with an RC-1000V controller and I am having a
problem with it.
When I power it on it transmits the ID and seems to be functioning like
it should. However once on it has a hard time kicking into transmit
mode. I think that it may be that the radio is not breaking
9 matches
Mail list logo