I purchased a GE MASTR II with an RC-1000V controller and I am having a problem with it.
When I power it on it transmits the ID and seems to be functioning like it should. However once on it has a hard time kicking into transmit mode. I think that it may be that the radio is not breaking squelch. I have no idea how this was setup and modified so it may just be that the squelch circuit is not right or not adjusted right, however I have not seen any squelch adjustment at all on the outside of the radio. Before I start to tear this thing apart and break anything that isn't already broken. Is there any way I can determine if the radio is breaking squelch or what is going on with receive? All I have is the control cable with the end cut off which is patched into a terminal strip that is then connected to the RC-1000V cable that goes to the DB25 on the back of the case. Does anyone have the wiring colors of the MASTR II control cable and/or the RC-1000V factory cable if there is such a thing? That might help in trouble shooting. Thanks, Vern KI4ONW
