Re: [Repeater-Builder] MCC RC-100 and Remote Base PTT

Did you check the logic level driving the PTT transistor ? Does it change ? -- Original message -- From: raritansailor [EMAIL PROTECTED] Hi Folks, I have an MCC RC-100 that I've been using for the MADXRA 147.345 Repeater, here on the Panhandle of WV. Has

RE: [Repeater-Builder] Re: Moto GM300's Used With External Controller - Blank Frequency Entry

type the word blank in the freq window The radios were most likely programmed in the repeater mode of rss not radio mode. This is a normal thing to occur This is not even required unless you need to make absolutely sure that a receive radio never transmits ( ie into a preamp or multicoupler for

Re: [Repeater-Builder] VHF Splitter

Be careful ! Won't the packet digi also transmit on the same antenna line ? Thereby destroying the other receivers ?? -- Original message -- At 06:01 PM 7/23/2005, drwoolweaver wrote: Ham club wishes to use one VHF receive antenna for three different VHF receive

Re: [Repeater-Builder] Remote Receiver PL

Why not put the PL decoder at the voter site where you can control it ? I'm in the early feasibility stage of moving an OEM repeater from single-site to multiple receivers and a central control/transmitter. The receivers will probably be linked to the control/transmitter site via

Re: [Repeater-Builder] conversion of gm300 to repeater w/out rick..

Check http://www.batlabs.com/rptrcabl.html Also the GM300's have an internal jumper that provides either flat/unmuted audio or deemph/muted audio out. The transmitter jumper must be changed accordingly. Note this is a quick and dirty solution. There is no id'er has anybody converted 2 gm300