[Repeater-Builder] Re: Repeater input getting interference FROM a TV?

2008-03-11 Thread wb7cjq
This might sound too simplistic, after reading some of the other responses. Is the TV grounded??? A lot of them just have a polarized AC plug, not a grounded (3-pin) plug. AND, along the same lines, is the AC outlet grounded??? I've found several 3- pin grounded outlets in our house that

[Repeater-Builder] Yaesu FT-2800 Solutions

2008-02-22 Thread wb7cjq
Anybody wanting to use the 2800 as the receive side of a repeater and/or remote base or Echolink system, I have (as of today) the answers!!! I can get you discriminator level gated audio as well as a COS type signal. Both will require external circuitry, but I've found those hidden little

[Repeater-Builder] Re: Yaesu FT-2800 Interface

2008-01-31 Thread wb7cjq
. Is there not a controller? In other words, does this cross band link stay keyed all the time? 73 Bernie Parker K5BP DARC Tech Officer --- In Repeater-Builder@yahoogroups.com, wb7cjq wb7cjq@ wrote: --- In Repeater-Builder@yahoogroups.com, dallasreact112 dallasreact112@ wrote

[Repeater-Builder] Re: Yaesu FT-2800 Interface

2008-01-29 Thread wb7cjq
@yahoogroups.com, wb7cjq wb7cjq@ wrote: Does anybody know where to pick-off the squelched discriminator audio, the line level audio input and the COS signals ??? The schematic shows J309 that appears to have some of this stuff, but the connector is itty-bitty - I can't find a mating

[Repeater-Builder] Yaesu FT-2800 Interface

2008-01-28 Thread wb7cjq
and can post the info. !!! Thanks, Dave WB7CJQ

[Repeater-Builder] Uniden SMS 930TS --- For W7TIO

2008-01-04 Thread wb7cjq
Dick; I've been busy. I can't remember if I sent you the programmer software, FCC data, etc. Please advise! I might have uploaded the stuff to here, but I can't remember. Sigh. Getting old really sucks. I did manage to get my pair operating well on TAC, but figuring out the software was