[Repeater-Builder] Decibel folded dipole

Hi all I am looking for someone that may have modified a Decibel four bay folded dipole antenna to operate in the UHF hamband. I'm not sure if the one I have is 450-470 or the lower UHF 420 type there is no tag on this one. Thanks in advance Mike

RE: [Repeater-Builder] Decibel folded dipole

Mike , I had a Similar Question My is made By DB But had a Mot Tag on it , I was told to just Try it and check the Swr it was about a 1.8 So the advice I got was to just use it and I did and it works Fine , it is a Very Well made ant . Answers still should be in the files Good Luck

RE: [Repeater-Builder] Decibel folded dipole

Subject: [Repeater-Builder] Decibel folded dipole Hi all I am looking for someone that may have modified a Decibel four bay folded dipole antenna to operate in the UHF hamband. I'm not sure if the one I have is 450-470 or the lower UHF 420 type there is no tag on this one. Thanks in advance Mike

Re: [Repeater-Builder] Decibel folded dipole

PM Subject: [Repeater-Builder] Decibel folded dipole Hi all I am looking for someone that may have modified a Decibel four bay folded dipole antenna to operate in the UHF hamband. I'm not sure if the one I have is 450-470 or the lower UHF 420 type there is no tag on this one. Thanks

Re: [Repeater-Builder] Decibel folded dipole

Question is that the Length Before the Element is Bent? or is that already bent measurinf from Tip to tip? --- On Sat, 2/7/09, Chuck Kelsey wb2...@roadrunner.com wrote: From: Chuck Kelsey wb2...@roadrunner.com Subject: Re: [Repeater-Builder] Decibel folded dipole To: Repeater-Builder

Re: [Repeater-Builder] Decibel folded dipole

Tip to tip of the element. - Original Message - From: neal Newman cozy...@yahoo.com To: Repeater-Builder@yahoogroups.com Sent: Saturday, February 07, 2009 6:34 PM Subject: Re: [Repeater-Builder] Decibel folded dipole Question is that the Length Before the Element is Bent