Re: [Repeater-Builder] Manual Needed

2009-05-31 Thread Lee Pennington
Thanks Guys, I certainly appreciate all of your Input. de Lee K4LJP 73 On Sun, May 31, 2009 at 7:39 PM, Mike Morris WA6ILQ wrote: > > > At 03:15 PM 05/31/09, you wrote: > > Hi guys, > Anyone have a spare service manual for a G.E. Mastr II, UHF machine?? > It does not have to be like new, just *

Re: [Repeater-Builder] Manual Needed

2009-05-31 Thread Mike Morris WA6ILQ
At 03:15 PM 05/31/09, you wrote: Hi guys, Anyone have a spare service manual for a G.E. Mastr II, UHF machine?? It does not have to be like new, just complete and not too raggedy. HI Model # DC55YAU77B, tnx in advance. de Lee K4LJP 73 -- "Smart pills are placebos, you can't fix stupid." This

RE: [Repeater-Builder] Manual Needed

2009-05-31 Thread Eric Lemmon
-Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Lee Pennington Sent: Sunday, May 31, 2009 3:15 PM To: Repeater Builders Yahoo Group Subject: [Repeater-Builder] Manual Needed Hi guys, Anyone have a spare service manual for a G.E

[Repeater-Builder] Manual Needed

2009-05-31 Thread Lee Pennington
Hi guys, Anyone have a spare service manual for a G.E. Mastr II, UHF machine?? It does not have to be like new, just *complete* and not too raggedy. HI Model # DC55YAU77B, tnx in advance. de Lee K4LJP 73 -- "Smart pills are placebos, you can't fix stupid."

[Repeater-Builder] Manual needed for Spectrum Communications SCR 1000A repeater

2009-03-20 Thread dvickn4ome
I'm looking for a manual for the Spectrum Communications SCR 1000A VHF repeater or any other information anyone can share. I need a starting point so any information is appreciated. Thanks Darryl - N4OME

RE: [Repeater-Builder] Manual needed Motorola S-1320A Signal Generator

2008-12-21 Thread Eric Lemmon
eater-buil...@yahoogroups.com] On Behalf Of Arthur R Carlson Sent: Saturday, December 06, 2008 5:34 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Manual needed Motorola S-1320A Signal Generator I have 2 Motorola S-1320A-1 Solid state signal generators in my shop that I ne

Re: [Repeater-Builder] Manual needed Motorola S-1320A Signal Generator

2008-12-13 Thread Mike Morris WA6ILQ
Try this one: Go to www.repeater-builder.com, click on Motorola, scroll down to "The manual for Motorola's S-1318A, S-1319A, S1320A, S1321A and S1329A Signal Generators". It's been there for over 4 years. And when corrected, the mcarcoh link does work - the spaces in it didn't get properly trans

Re: [Repeater-Builder] Manual needed Motorola S-1320A Signal Generator

2008-12-12 Thread Mike Morris WA6ILQ
Try this one: Go to www.repeater-builder.com, click on Motorola, scroll down to "The manual for Motorola's S-1318A, S-1319A, S1320A, S1321A and S1329A Signal Generators". It's been there for over 4 years. And when corrected, the mcarcoh link does work - the spaces in it didn't get properly tra

Re: [Repeater-Builder] Manual needed Motorola S-1320A Signal Generator

2008-12-12 Thread neal Newman
Don this Link does not work  Neal-ka2caf --- On Mon, 12/8/08, Don Kovalchik - W8DPK wrote: Here is a link to the S-1320A service manual: It's a pretty large file, about 16MB, but it's very high resolution.  I'll leave it on the site

Re: [Repeater-Builder] Manual needed Motorola S-1320A Signal Generator

2008-12-12 Thread Don Kovalchik - W8DPK
Here is a link to the S-1320A service manual: It's a pretty large file, about 16MB, but it's very high resolution. I'll leave it on the site for a few weeks. 73, --Don-- W8DPK ,___

Re: [Repeater-Builder] Manual needed Motorola S-1320A Signal Generator

2008-12-08 Thread no6b
> >Mike WA6ILQ Mike: I didn't receive a reply to the e-mail I sent you last week. Did you get it? Bob

Re: [Repeater-Builder] Manual needed Motorola S-1320A Signal Generator

2008-12-08 Thread Jim Brown
pass and also tune the nulls.  I use another 6 dB pad at the port output to the talkie and a 50 ohm load on the other port. 73 - Jim  W5ZIT --- On Sat, 12/6/08, Arthur R Carlson <[EMAIL PROTECTED]> wrote: From: Arthur R Carlson <[EMAIL PROTECTED]> Subject: [Repeater-Builder] M

Re: [Repeater-Builder] Manual needed Motorola S-1320A Signal Generator

2008-12-07 Thread Mike Morris WA6ILQ
At 05:34 PM 12/06/08, you wrote: >I have 2 Motorola S-1320A-1 Solid state signal generators in my shop >that I need to service. One has intermitant 1000hz tone sometimes it >works and usually when you need it it doesn't. The other has a power >supply problem. I would like to find a manual for this

[Repeater-Builder] Manual needed Motorola S-1320A Signal Generator

2008-12-07 Thread Arthur R Carlson
I have 2 Motorola S-1320A-1 Solid state signal generators in my shop that I need to service. One has intermitant 1000hz tone sometimes it works and usually when you need it it doesn't. The other has a power supply problem. I would like to find a manual for this either borrow, rent or buy. I us

Re: [Repeater-Builder] manual needed

2004-06-10 Thread Jim B.
Mike Pugh wrote: > Anyone have a manual, a copy, a scan, or a PDF for a Ritron Responder > UHF desktop repeater? Unit has no model number on it I can find, but has > FCC ID# of AIE9QZRR-450. Any help is appreciated. Mike Pugh > FWIW-I can't help with the manual, but the model number in this ca

[Repeater-Builder] manual needed

2004-06-05 Thread Mike Pugh
Anyone have a manual, a copy, a scan, or a PDF for a Ritron Responder UHF desktop repeater? Unit has no model number on it I can find, but has FCC ID# of AIE9QZRR-450. Any help is appreciated. Mike Pugh Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.ya

[Repeater-Builder] Manual Needed

2003-12-22 Thread Robin McCoy
OK, no laughing I have been "blessed" with about 15-20 Redicom MX80T 35S radios. As I understand it, these radios when originally designed were in the 900 MHz range and down banded for use in the US. I want to explore the possibility of converting them to 900 RX for repeater use and maybe even use