[Repeater-Builder] RE:Mastr II drift problem

Hello all, I think I have the problem resolved! I went to the repeater site and modified the plug that goes in to the exciter by putting two resistors and a jumper on the plug to enable the compensate line. Gerald, AA4YQ told me about this. The spare repeater I have here at home already had thi

Re: [Repeater-Builder] RE:Mastr II drift problem

At 10:00 AM 08/05/10, you wrote: >I was told that I should be using 5C for receive and transmit but >the 5C will NOT fit on my PLL exciter. > >Any ideas? > >Steve W4SEF See this article It has photos of the EC, 5C and 2C wide and narrow ICOMs. Y

RE: [Repeater-Builder] RE:Mastr II drift problem

There are 5C elements made for that exciter. you just do not have one.. From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of steve Sent: Thursday, August 05, 2010 1:01 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] RE:Mastr II

[Repeater-Builder] RE:Mastr II drift problem

I was told that I should be using 5C for receive and transmit but the 5C will NOT fit on my PLL exciter. Any ideas? Steve W4SEF