Try this http://www.cqham.ru/rln4008d.htm Hope this help.
73
W4CSO
- Original Message -
From: Bob M.
To: repeater-builder@yahoogroups.com
Sent: Saturday, April 05, 2008 2:51 PM
Subject: [Repeater-Builder] RIB-less cable circuitry
Does anybody know of schematics for RIB
Did you check batlabs.com?
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Bob M.
Sent: Saturday, April 05, 2008 11:52 AM
To: repeater-builder@yahoogroups.com
Subject: [Repeater-Builder] RIB-less cable
to be sure the port is
actually enabled.
George, KA3HSW / WQGJ413
- Original Message -
From: Bob M. [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, April 05, 2008 8:00 PM
Subject: Re: [Repeater-Builder] RIB-less cable
circuitry
Thanks. That's what I
is not
providing it.
73, ron, n9ee/r
From: Bob M. [EMAIL PROTECTED]
Date: 2008/04/06 Sun AM 04:24:56 CDT
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] RIB-less cable circuitry
On the two Dell computers the RIBless cables don't
work on, a regular battery
, ron, n9ee/r
From: Bob M. [EMAIL PROTECTED]
Date: 2008/04/05 Sat PM 08:00:59 CDT
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] RIB-less cable circuitry
Thanks. That's what I was looking for.
The reason I'm investigating this is that a friend
bought several
Does anybody know of schematics for RIB-less cables?
I'm trying to find out which pin(s) they use to get
power from the serial port to operate the circuitry
built into the DB9 connector body.
I've got a couple that seem to be dead on two
computers but run fine on another one and I suspect
some
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Bob M. [EMAIL PROTECTED]
To: repeater-builder@yahoogroups.com
Sent: Saturday, April 05, 2008 2:51 PM
Subject: [Repeater-Builder] RIB-less cable circuitry
Does anybody know of schematics for RIB-less
PROTECTED]
To: repeater-builder@yahoogroups.com
Sent: Saturday, April 05, 2008 2:51 PM
Subject: [Repeater-Builder] RIB-less cable circuitry
Does anybody know of schematics for RIB-less
cables?
I'm trying to find out which pin(s) they use to
get
power from the serial port to operate
PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, April 05, 2008 8:00 PM
Subject: Re: [Repeater-Builder] RIB-less cable circuitry
Thanks. That's what I was looking for.
The reason I'm investigating this is that a friend
bought several RIBless cables to program GTX radios.
We used
9 matches
Mail list logo