Jim Cicirello [EMAIL PROTECTED] wrote:
Hi Skipp:
My repeater is the converted Base. I had the
logic line, I was thinking I had to make a
circuit to switch between the CAS and CTCSS
lines, I didn't think about the controller
CTCSS circuit which was there all the time.
Can I give you
skipp025 wrote:
... snip ...
The receiver decoder board is probably different
than the transmitter encoder board.
From memory, the mobile and base radios use the
same boards except in community repeater stations.
Very, very true.
Was just in the shop studying that very
Hi Jim,
After my last post, it came to me that some people are
possibly using micor mobiles, which have a different
pl function the way I did my last mobile.
I also didn't ask if your amateur conversion used the
original micor modules as some conversions remove most
or all the back plane
: skipp025 [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 02, 2005 8:03 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Found Answer to Micor CTCSS and CAS
Question.
Hi Jim,
After my last post, it came to me that some people are
possibly using micor mobiles, which
4 matches
Mail list logo