[Repeater-Builder] tkr820 repeater

2010-08-24 Thread cberende
who want to help me with my repeater who light as a cristmas tree but doing nothing or the micro processor 1 who produce the data, most lines are 'high and i can not communicate with my programmer ( thats power,busy,tx light up) here in Brasil is very difficuld (portuguese) and I am Dutch so

Re: [Repeater-Builder] tkr820 repeater

2010-08-24 Thread Chris Carruba
...@tecees.com To: Repeater-Builder@yahoogroups.com Sent: Tue, August 24, 2010 6:44:23 PM Subject: [Repeater-Builder] tkr820 repeater who want to help me with my repeater who light as a cristmas tree but doing nothing or the micro processor 1 who produce the data, most lines are 'high and i can

RE: [Repeater-Builder] TKR820

2005-06-17 Thread Gary LaForce
Mouser, Digikey and so on it is a standard molex plug Gary -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Maire-Radios Sent: Thursday, June 16, 2005 12:02 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] TKR820

RE: [Repeater-Builder] TKR820

2005-06-16 Thread Wayne Cornick
To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] TKR820 Does anyone have a source of the special molex plug for the back of a Kenwood TKR820? Thanks David [EMAIL PROTECTED] snip Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com

[Repeater-Builder] TKR820

2005-06-15 Thread drwoolweaver
Does anyone have a source of the special molex plug for the back of a Kenwood TKR820? Thanks David [EMAIL PROTECTED] Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to:

Re: [Repeater-Builder] TKR820

2005-06-15 Thread Maire-Radios
got a Kenwood part number? (don't have a 820 book sorry) - Original Message - From: drwoolweaver [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Thursday, June 16, 2005 12:05 AM Subject: [Repeater-Builder] TKR820 Does anyone have a source of the special molex plug

[Repeater-Builder] TKR820 (tkr-720) COR logic (pin 13) information wanted.

2005-01-11 Thread skipp025
Hello there, Anyone have information to configure the COR output logic on the Kenwood TKR820 Repeater to ctcss only? I'd like to make pin 13 (COR) of the accessory connector change states with a valid received ctcss tone. As received, accessory pin 13 (COR) changes state with carrier

Re: [Repeater-Builder] TKR820 (tkr-720) COR logic (pin13)informationwanted.

2005-01-11 Thread XE2SI
d a buffer for what you need. hope this helps. Juan - Original Message - From: skipp025 To: Repeater-Builder@yahoogroups.com Sent: Monday, January 10, 2005 6:27 PM Subject: [Repeater-Builder] TKR820 (tkr-720) COR logic (pin 13)informationwanted. Hello there, A