Don KA9QJG wrote:
__,_.
Speaking of the Alnico DR-235 , I had A Ham Friend Who was told by a
Ham Radio Dealer with four State stores the Radio has been
discontinued , They had one left , and the Reason was the New Model
would come out made with Lead free Solder
I have
Nate Duehr wrote:
Don KA9QJG wrote:
__,_.
Speaking of the Alnico DR-235 , I had A Ham Friend Who was told by
a Ham Radio Dealer with four State stores the Radio has been
discontinued , They had one left , and the Reason was the New Model
would come out made with Lead free Solder
__,_.
Speaking of the Alnico DR-235 , I had A Ham Friend Who was told by a Ham
Radio Dealer with four State stores the Radio has been discontinued ,
They had one left , and the Reason was the New Model would come out made
with Lead free Solder
I have No idea if this is true or not, but
Take a look at this link
http://members.aol.com/w8ak/maxtrac222.htm
I ran into Glenn, W8AK out at Dayton back in May.. He had a couple of these
Maxtracs set up as a repeater on 224 mhz and seemed to work real nice.. I have
not tried the conversion myself but it looks like it
Jed Barton wrote:
Hey guys,
Any good radios to use for 220 linking? I know Alinco makes the DR235, but
the PL decoder sucks on it.
http://www.irlpcables.com/AlincoTS64.html
Anything from tait or anything else to suggest?
I need a few of these.
Been meaning to order a pair of the Tait 220
Jed,
I'm using some synthesized Hamtronics TX and RX modules in a 220 repeater,
and they seem to be holding up well. If properly encased and shielded,
those modules should perform well in link service. your ready-made options
are few...
73, Eric Lemmon WB6FLY
-Original Message-
any ideas for ready made options?
Thanks,
Jed
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Eric Lemmon
Sent: Wednesday, September 12, 2007 11:24 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] 220 link radios
Jed,
I'm using
Jed , I picked up a Midland 13-508 Old Xtal 220 Mobile, also Made is a
Cobra 200 and Clegg Models all the Same, Not sure who made for who, I
think they were the First radios around yrs back when people started
putting Repeaters together , The Xmit Board and Rec Board can be easily
separated ,
8 matches
Mail list logo
