manufacturers' data sheet.
73
Rod Lane, N1FNE
-Original Message-
Subject:
Re: [Repeater-Builder] Crimp versus Clamp Connectors
From:
Repeater-Builder@yahoogroups.com
To:
Repeater-Builder@yahoogroups.com
Eric Lemmon wrote:
Lee,
I appreciate your comments, but I can rebut them easily. I have seen too
many clamp-type connectors pull apart, usually because they were
over-tightened during assembly. Take a close look at a MIL-spec clamp-type
N connector, and you can see that the knife-edge
I just salvaged some silver amphenol BNCs and this was the case.On 2/1/06, Tony King, W4ZT [EMAIL PROTECTED]
wrote:Eric Lemmon wrote: Lee, I appreciate your comments, but I can rebut them easily.I have seen too
many clamp-type connectors pull apart, usually because they were over-tightened
There is no knife edge against the braid,it is a clamping type
connector that the braid folds over a stepped insert.
I will relate my experience with crimp connectors when we decided to
try them for the first time. We had put 22 antennas up on a 500' Rohn 65
tower with crimped on connectors on
Never forget MIL-TDD-41 ...
Neil - WA6KLA
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
Subject: Re: [Repeater-Builder] Crimp versus Clamp Connectors
Eric Lemmon wrote:
Lee,
I appreciate your comments, but I can rebut them easily. I have seen too
many clamp-type connectors pull apart, usually because they were
over-tightened during assembly. Take a close look at a MIL-spec
, 2006 6:47 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Crimp versus Clamp Connectors
Every Mil-spec clamp type N connector I have ever made put the knife
edge towards the red gasket material, not the braid. See the scan of an
original instruction sheet: http
-Builder] Crimp versus Clamp Connectors
Every Mil-spec clamp type N connector I have ever made put the knife
edge towards the red gasket material, not the braid. See the scan of an
original instruction sheet: http://testeqdocs.w4zt.com/nconnector/
73, Tony W4ZT
Yahoo! Groups Links
PROTECTED] On Behalf Of Q
Sent: Wednesday, February 01, 2006 3:11 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Crimp versus Clamp Connectors
There is no knife edge against the braid,it is a clamping type
connector that the braid folds over a stepped insert.
I
9 matches
Mail list logo