Jim Cicirello wrote:
*Hi Kevin, As always thanks for your help. Can I tell you what I am
doing and what is happening so you can yell me why?*
* *
*First the only problem I am having is after the CTCSS becomes active
then drops, the tail of the NHRC will broadcast NON PL signals or
Subject: RE: [Repeater-Builder] NHRC-4 CONTROLLER AND TS-32 TONE BOARD
Hi Chuck,
Here I have explained to Lowell the problem I am having using a relay to
break the encode output line: Any ideas
Hi Lowell,
Thanks for the information. I have a similar design I think where I use
Jim Cicirello wrote:
Hi Guys,
Another project and another question for you please.
I am installing a TS-32 on my UHF repeater. I followed the
instructions and the decode works OK. Now I want the Encode Output to
be active only when CAS is activated, so there is no ctcss present
when the
Kevin Custer wrote:
Follow the link to the right mod:
http://www.repeater-builder.com/nhrc/pix/nhrc-4-ctcss-switch.gif
HOWEVER... (Since the TS-32 doesn't have a encode tone enable) Use the
relay contacts to make and break the CTCSS Tone to the transmitter.
(Keep the encoder/decoder
JIM KA2AJH Wellsville, NY
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Kevin Custer
Sent: Saturday, January 12, 2008 10:31 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] NHRC-4 CONTROLLER AND TS-32 TONE BOARD
Kevin
If you are going to use a relay, simply use a set of the relay contacts to
break the encode output line.
Chuck
WB2EDV
- Original Message -
From: Jim Cicirello [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, January 11, 2008 9:25 PM
Subject: [Repeater-Builder]
: [Repeater-Builder] NHRC-4 CONTROLLER AND TS-32 TONE BOARD
If you are going to use a relay, simply use a set of the relay contacts to
break the encode output line.
Chuck
WB2EDV
- Original Message -
From: Jim Cicirello [EMAIL PROTECTED] mailto:ka2ajh%40gmail.com com
To: Repeater-Builder
7 matches
Mail list logo
